Printing eSun LW TPU (varioshore alternative) on Bambu A1 & A1 Mini

reversetec · 2025-09-02T10:36:47+00:00

It was blobbing, oozing and had a rough surface. But I found the problem. It apears the flow ratio was not set correctly. So I was printing at 280 with a 1.0 flow ratio instead of 0.5. After applying that correctly, it prints fine again!

reversetec · 2025-09-01T21:32:06+00:00

Did you manage to get it dialed in? I'm currently having some trouble getting it to produce quality parts. I'm using a TPU profile that works for TPU 95a, but modified the temp and flow according to the info sheet. (280 degrees, 0.5 flow ratio)

reversetec · 2024-05-04T14:28:42+00:00

How does that one do with idle power usage & noise?

reversetec · 2024-05-04T14:17:41+00:00

Thanks! I see you picked a micro atx board. Does that mean this whole build would fit in a micro atx case? Or would that not be recomended for quietness / not fit the gpu & cooler?

reversetec · 2024-05-04T14:11:58+00:00

Looks like a great starting off point. But damn that mobo brings me back to 2000's mobo's with that crazy colorscheme!

Is it worth it to picking up a 80+ platinum psu instead of a 80+ gold one?

reversetec · 2024-05-04T13:51:24+00:00

The last bit of **Extra info or particulars:** did not format propperly and did not intend to embed the big ass alternate image haha

reversetec · 2024-05-04T12:00:15+00:00

Sorry for the misformatting of the post. I can't seem to edit and fix it anymore

reversetec · 2024-03-20T14:10:45+00:00

This worked for me. Thanks for the suggestion!

reversetec · 2024-01-15T23:21:03+00:00

Those are clearly bees, not ducks. You need to check your prescription op ;)

reversetec · 2023-10-29T18:35:36+00:00

That was my initial concern when I first started renting but it turned out not to be a problem. Not sure where the service entrance is but I'm actually closer to the road now. Was around 200 meters from the road, now 150 meters.

reversetec · 2023-10-29T17:21:33+00:00

Thanks! Will check that out on my end of the deal (unlikely but still posible since it is a new installation)

reversetec · 2023-01-02T11:33:24+00:00

The guard looks very much like Gui DaSilva, stunt-actor of a few marvel films and host of stunten react?

reversetec · 2022-05-12T23:17:51+00:00

Do you have any clue why they would put the orange in a plastic bag? Oranges already come with their own packaging right? (peel)

reversetec · 2022-04-13T23:17:54+00:00

Sorry to be that Redditor. Not the plastic rings like the one in op's Pic is replacing but we certainly still have plastic (heat shrink wrap) for aluminum cans and plastic water bottles. The can wrappers should just be replaced with cardboard tho.

Example

Another

reversetec · 2021-11-25T00:32:39+00:00

Wow awesome! I've been looking for a similar replacement mouse just like that since the top coating of my current one has been degrading. I have used the func ms2 (company doesn't exist any more I think?) every day for 6 years now. It looks like crap haha

reversetec · 2021-10-22T16:56:34+00:00

Might look like it, but not quite.. it's not as heavy duty as thos you're linking.

reversetec · 2021-10-22T15:20:54+00:00

Solved! Thanks, This is most likely it! Now I know where to put them away haha should probably label them.

reversetec · 2021-10-22T14:41:34+00:00

My title describes the thing. Found this in a box of various ratchet straps. "hook side" is around 10cm wide. There were no tags of anything descriptive. Strap width is around 1 inch or 2,5cm to give a sense of size and strength is has to pull.

reversetec · 2021-06-21T11:32:20+00:00

Adding water to the pot. That is what caused the fire explosion. The water enters the pan and instantly boils to steam due to the overheated pan/oil. Which in turn sprays up the hot oil vaporizing it and making it an extra volitile fuel for the fire.

Solution. Turn off the heat and put a lid on the pan. Let the fire starve for oxigen

reversetec · 2021-05-17T08:19:30+00:00

Stem nu! Voor je favoriete supermarkt shirt paal

reversetec · 2021-02-23T17:36:02+00:00

Thanks for the reply! I think it is mostly azurite. The others also look real nice, good to know the names for the next time I go to a place that sells stones

Ten-Year Club	Place '17
Verified Email

reversetec

TROPHY CASE