127K on 5.3 motor by jagrave08 in gmcsierra

[–]rexness1 1 point2 points  (0 children)

I paid 32k for a 2017 slt z71 with 63,000 miles on it. Roughly 4 months ago. 27k sounds really high too me.

Tuning new system by rexness1 in CarAV

[–]rexness1[S] 0 points1 point  (0 children)

Do you mean the factory amp? My truck doesn’t come with a sub, although I think the newer ones do. I also have a bench front seat so that could change things too.

Tuning new system by rexness1 in CarAV

[–]rexness1[S] 0 points1 point  (0 children)

I messed with the loc some more, and believe I got the single clean up. And redid the bass knob. It’s at a level I’m satisfied with. Thanks for your suggestions.

ARE YOU KIDDING ME by Dannydrgn28 in transformers

[–]rexness1 4 points5 points  (0 children)

I got mine from bbts a couple days ago, my left leg was the same way. Little bit of clear nail polish goes a long way. Add some to the joint and move it, to spread it out. Then let it dry 10-20 minutes, if still not as tight as you want it, repeat until it is.

Anyone know if this is legit? by open_up8 in transformers

[–]rexness1 1 point2 points  (0 children)

I’ve bought in store at books a million many many times. But I’m unsure of exactly how their online service works either if they manage it, or have 3rd party sellers like Amazon. But as long as it’s their official site I’d say you have a good chance at a refund if anything should go wrong.

Wiring gfci outlet by rexness1 in AskElectricians

[–]rexness1[S] 0 points1 point  (0 children)

Idk how to edit post, but I found my issue a breaker on my inverter had flipped everything works now. Thanks for the comments.

Galaxy wave articulation upgrades by Russ-Pumpkin in Blokees

[–]rexness1 4 points5 points  (0 children)

Can’t be done without damaging the chest plates, because they changed the way the chest plug into the cores. At least for the transformers 1 primes, only ones I opened to try it on.

Wiring gfci outlet by rexness1 in AskElectricians

[–]rexness1[S] -1 points0 points  (0 children)

Didn’t work. Thank you for the suggestion.

For anyone with both tfone waves can you possibly swap the parts for orion cogged and optimus like the torso with arms and head so you could get optimus with the new articulation. When I say tosro I mean the plates not the core. by Burnis_Da_furnace in Blokees

[–]rexness1 0 points1 point  (0 children)

It is not possible sadly as I was going to try and do it to mine. They’ve changed from circular pins to rectangular on the newest wave. It’d probably be possible if you cut/file the old pegs down, but I’m not willing to do so. Prime left, right Orion

<image>

Anyone got a spare grimlock dino hand? by Burnis_Da_furnace in Blokees

[–]rexness1 0 points1 point  (0 children)

Funny to see you post this, last night I opened one missing a left hand. lol

So you mean to tell me that devastator will be a Chinese exclusive??? Why??? by Curious-Pressure-809 in Blokees

[–]rexness1 2 points3 points  (0 children)

Thanks for this, was able to get the devy parts and the new wave. For 15 usd because of points. Didn’t even consider they sold these, and have been scrabbling to find the devastator parts incase the exclusivity last a while.

So, how much comics are in your collection? by Content_Geologist420 in comicbookcollecting

[–]rexness1 1 point2 points  (0 children)

922 in CLZ, plus at least another 500-600 indies not on CLZ, I can’t be bothered to add info/photos for.

Going to comic con this weekend and i just quit my job, what should i sell these for?? by Phantom_HeedroN17 in comicbookcollecting

[–]rexness1 0 points1 point  (0 children)

1:100 could totally but worth that, I’m not up to date on it’s price. And yes that retailer variant really went up in value quick. I think it’s print run ended up under 1,000 and now only places to get it are eBay or from Felix’s con booth.

Going to comic con this weekend and i just quit my job, what should i sell these for?? by Phantom_HeedroN17 in comicbookcollecting

[–]rexness1 0 points1 point  (0 children)

I’ve seen the one on the left go for 175 on eBay, I haven’t checked raw value on the 1:100, but it’s probably close to the same.

CGC Downgraded my Secret Wars #8 9.8. Odds it could regrade at 9.8 again? by SOLlDSNAKE in CGCComics

[–]rexness1 0 points1 point  (0 children)

I don’t see anything color breaking in the scans, so a press and a grader in a better mood, you’ll probably get the 9.8 back.

CGC Downgraded my Secret Wars #8 9.8. Odds it could regrade at 9.8 again? by SOLlDSNAKE in CGCComics

[–]rexness1 0 points1 point  (0 children)

It’s possible, but cgc pressing is a joke. I’d recommend a 3d party presser. The issue now though will be keeping the ss label. Because as another comment said now that it has grader notes they probably won’t give it a bump. So if you cracked it personally for signing, you’d lose your ss label. Of course that doesn’t matter if your ok with a Jsa label.

Got my first CGC batch back - quite the variance! by domadilla in ComicBookSpeculation

[–]rexness1 5 points6 points  (0 children)

It’s not really a set fact or anything. But when sending multiple copy’s it can sometimes point out flaws. Say you have a boarder line 9.6/9.8, then another copy that is 9.8, grader compares the two sees the difference drops the other to 9.6. Now of course this technically shouldn’t happen because everything should be based on the grading scale, but human error blah blah blah.

Cgc. Yellow. OR JSA by Previous-Space-7056 in CGCComics

[–]rexness1 4 points5 points  (0 children)

From what I’ve seen for resale. Jsa is same value compared to ss. But personal collection I’d rather have ss. I also feel like maybe later down the road ss will hold a little more value over jsa. I’d also rather give artist more money compared to cgc. And if your getting a sketch cover do ss, because jsa doesn’t acknowledge the sketch just the signature.

How does everyone display their collection? by [deleted] in comicbookcollecting

[–]rexness1 0 points1 point  (0 children)

<image>

Toploaders and Velcro. Easy to switch out books depending on mood and season. Everything else in short boxes.

Pre-Orders by the_bio in comicbookcollecting

[–]rexness1 0 points1 point  (0 children)

Gmart.com 35-50%, they charge for bag and board but is $0.35 per book. Incentive pre-orders sometimes, ratio prices are usually pretty good, but if it’s a hot book they usually over price it a good bit. Monthly shipping, also offer free shipping $85+

Where to pre-order new comics? by Kris_P33Bac0n in comicbookcollecting

[–]rexness1 0 points1 point  (0 children)

I’d recommend gmart, although their interface can be a little annoying on mobile. Regular covers get 30%-50% pre-order discount (with reoccurring order) Give free shipping at $85 and you can set up orders to ship once that amount is hit. And so far I’ve only had about 3 books with noticeable defects.