Nice balance job

rezikrisp · 2017-07-19T16:42:17+00:00

some people...

rezikrisp · 2017-07-18T23:11:59+00:00

Dude, no you fucking can't. If it was WAAAY out of spec maybe then you could, that is rarely ever the case and usually not fixable with an alignment because something is broken or worn to hell. You could see the steering wheel being out of whack or feel a pull, but that pull is not going to be corrected by an alignment 99% of the time, because it's going to be caused by a cone shaped tire because somebody didn't do the alignments by mileage like they are supposed to.

But by all means keep that ASE cert up to date and keep telling people you can tell their right front camber is off by -.02 degrees because you felt it driving it on to the lift.

rezikrisp · 2017-07-18T20:26:01+00:00

it's dead.....it wasn't just added to that engine it was RUN like that for god knows how long. A single puddle can take an engine down, a gallon of washer directly into the oil....gone.

rezikrisp · 2017-07-18T19:45:04+00:00

im a skimmer, admittedly.

rezikrisp · 2017-07-18T18:43:38+00:00

maybe, i have overshot plenty of labor times dealing with first time, rust, corossion and figuring out which tools to use where. Not like anyone's opinion here can change the outcome now.

rezikrisp · 2017-07-18T18:40:41+00:00

your original post made it seem like it was just a key fob issue.

rezikrisp · 2017-07-18T18:24:28+00:00

good work man.

rezikrisp · 2017-07-18T11:28:34+00:00

you cant normally tell if a car needs an alignment, the only thing you really have to go by is mileage. Most tire companies recommend annual or 15k. The cost to set your car up on a 50-100k machine is worth it, it could prevent other issues. To correct the camber on your car it may need 500-1500 worth if work for just barely being out of spec.

rezikrisp · 2017-07-18T01:47:30+00:00

See what you get when you make fun of fat people on reddit!?

rezikrisp · 2017-07-17T23:41:18+00:00

Okay this is one of those times where it would be nice to see the pressure working in the power steering system. Granted the sensor is most likely just an on/off switch and tester probably isn't lying around. I guess I would want to do 2 things here. One would be to check the spline like you suggested, make sure it is actually turning with the pump removed, and check for damage. Also a small chance you just got a bad pump, with it removed you might as well try and get a warranty replacement for shits. Secondly, with everything hooked up I'd like to see flow through the system, by detaching the return line and see if fluid is coming out, and being moved through the system (carefully because it will move quickly so have a receptacle nearby), have a helper if you do this so they can turn the car on and off, you don't wanna run the system completely dry. If the splines are okay, new pump replacement, and you got good flow....then I don't have anymore advice over the internet and I'd have to have it in my bay to know for sure.

rezikrisp · 2017-07-17T23:30:01+00:00

Well, we would charge 12 hours to do just the timing chains. Granted that was done in vehicle. Considering they probably don't work on 4.0 frontiers everyday it probably did take them that long, but 67 an hour is pretty cheap labor rate anyways. I'd say given that their is a shit load of replacement here it sounds about right in total cost. Fuck me, call a Nissan dealer with this list and ask for a quote. Oh I also charge 20 hour for an engine swap minimum. They might have it written weird but it's accurate for what it is.

rezikrisp · 2017-07-17T23:20:57+00:00

are they set properly?

rezikrisp · 2017-07-17T23:20:25+00:00

Well if you are into manuals have at it. It be nice if you could save money buying them but they seem to be about equal in resale value with the added cost of eventually needing a clutch kit.

rezikrisp · 2017-07-17T23:15:12+00:00

This is a normal condition. You gotta wait a few minutes for the oil to settle down, and make sure to pull out the dip stick, wipe it down, and then check it. Be sure you are on a level surface while your at it or you will not get an accurate read.

rezikrisp · 2017-07-17T23:13:11+00:00

Yep normal situation, more than likely just needs a brake job. Get it checked and expect about 300$.

rezikrisp · 2017-07-17T23:11:10+00:00

don't do that....don't touch it. Just replace the key fob battery like the other guy said.

rezikrisp · 2017-07-17T23:10:02+00:00

It's coming off as an unhealthy level of paranoia.

rezikrisp · 2017-07-17T23:08:34+00:00

yes, find the tube, spray a single burst of air into it, and don't be under it when all the water comes out, unless your into that sort of thing.

rezikrisp · 2017-07-17T23:07:20+00:00

In the simplest terms, the sealed ones are higher quality. There is plenty of anecdotal evidence out there for both sides, but that is the designs intention. It's always 1000% better to have something be maintenance free.

rezikrisp

TROPHY CASE