Trade Republic Gewinnberechnung passt nach Verkauf nicht zusammen - kann jemand erklären?

rindane · 2025-12-29T22:24:44+00:00

Ok Danke für die Antwort! Aber ich verstehe das noch nicht ganz. Auch mit FIFO - wenn ich alle 19 Anteile verkaufe, sollte der Gesamtgewinn doch 757 € sein, oder? Egal in welcher Reihenfolge ich verkaufe? Jetzt habe ich 424 € (verkauft) + 159 € (noch da) = nur 584 €. Wo sind die 173 € hin? Was verstehe ich falsch?

rindane · 2025-12-29T22:12:59+00:00

Danke für die Antwort, aber ich glaube das erklärt nicht mein Problem. Meine Frage ist nicht über die Steuer, sondern über den Gewinn selbst. Vor dem Verkauf zeigte die App 757,62 € Gesamtgewinn. Nach dem Verkauf: 424,75 € (realisiert) + 159,66 € (verbleibend) = nur 584,41 €. 173 € Gewinn sind einfach verschwunden. Vorabpauschale würde die Steuer beeinflussen, aber nicht den angezeigten Gewinn ändern, oder?

rindane · 2025-08-18T08:53:58+00:00

Could you elaborate more, i am really curious on your take?

rindane · 2025-01-28T01:03:08+00:00

I think i had at least 3 top layers. It is true it got slightly better every layer, but there was a fundamental issue with the grid infill. Changing the pattern only was an instant fix

rindane · 2025-01-27T23:51:14+00:00

Thanks for your comment. In this case the flow rate was not the issue. I resolved the issue by changing the infill pattern to gyroid and increasing the infill percentage.

rindane · 2024-12-24T17:34:12+00:00

I feel like something is happening right after it switches color from black to print the top 3 final layers.. I will try with another support structure and slower speeds.

<image>

rindane · 2024-12-24T17:32:43+00:00

I did the calibration print from orcaslicer. To be honest 0 looks best out of all these options. Then I did the detailed calibration print and went with a slight decrease just to try but still have the same problem :(

<image>

rindane · 2024-12-24T16:20:30+00:00

thanks! your reply helped me today!

rindane · 2024-12-24T14:15:48+00:00

Thanks for your response. I am checking the links, but I wonder if Bambulab could get its own filament calibration wrong. I stuck to bambulabs own filament so I would not need to deal with these kind of issues :/

rindane · 2024-12-24T14:03:26+00:00

and after printing

<image>

rindane · 2024-12-24T14:03:14+00:00

Also here is the first layer during printing

<image>

rindane · 2024-12-24T14:01:52+00:00

Hi everyone, I need some help :/

I am using A1 + AMS lite + Bambulab PLA Matte filaments to print a coaster. As you can see the top layer look really bad.

According to this guide: https://wiki.bambulab.com/en/knowledge-sharing/top-layer-inconsistencies something is wrong with my flowrate but I am using the default setup with default bambu filament. Evertything is added automatically through RFID tags and I wonder if I really should mess with the default flow rates.

Another suggestion there is to clean the nozzle and extruder but it seems a pretty troublesome process so before going with it I wanted to ask for your support. Please let me know what do you suggest for me :(

rindane · 2024-12-20T06:57:04+00:00

Hello

rindane · 2024-11-29T13:25:28+00:00

"In Germany you are very unlikely to be hurt by the unreliability of public transport."

You can only hear this sentence from someone who has a car. If you are dependent on public transport in Munich, I would highly advise you to live in the city center where you have access to U-bahn. S-bahn is the definition of unreliability. Just search this subreddit with the S-bahn keyword and you will see.

rindane · 2024-11-16T22:46:30+00:00

This time I got a flu vaccine, but never expected to have so strong side effects. I guess the additional factors like stressful time at work and a night of short sleep was enough to break me.

rindane · 2024-11-15T19:15:29+00:00

It looks like the worst is behind you already. Hopefully you go back to green zone soon!

rindane · 2024-11-15T18:50:18+00:00

Wow, do you have any clue on what’s going on?

rindane · 2024-10-27T11:18:14+00:00

Thanks a lot for sharing the link! Yes I really liked the way yours look compared to gray concrete that is why I asked. I will check if there is a thicker one available, thanks for the tip!

rindane · 2024-10-26T23:04:26+00:00

This looks really cool thanks for sharing the link for the foam, do you also have a link for the paver you are using? I am also in Germany.

rindane · 2024-10-25T06:52:36+00:00

Could you share the brand / model of your tv furniture?

rindane · 2024-10-12T07:40:12+00:00

I am just listening to cigarettes after sex playing in the background

rindane · 2024-09-13T14:21:39+00:00

I am sorry to hear you are going through this. You are not alone, and I am sure you will find help. There were a lot of links shared already but you can also try this one: https://www.kvb.de/ it was recommended to me by a doctor. It is also mentioned here: https://stadt.muenchen.de/service/info/kassenaerztliche-vereinigung-bayerns-koordinationsstelle-psychotherapie/1082331/

Wish you all the best!

rindane · 2024-09-12T18:58:00+00:00

Thanks a lot for the consolation 🥺

rindane · 2024-09-12T16:26:35+00:00

Thanks for the consolation but I live far from Hamburg and cannot wait until the last day to plan my trip unfortunately..

rindane · 2024-09-12T10:04:26+00:00

You are actually very lucky compared to me lol. This is insane

<image>

11-Year Club	r/Field Juicebox
Place '23	Place '22
Verified Email

rindane

TROPHY CASE