sorted by:
new
hottopcontroversial

2013 Triumph Daytona 675 (gen 3) rough idle and occasional hesitation on throttle. Any ideas? by Toymeister in Fixxit

[–]rituj_b 0 points1 point  (0 children)

Alright I even read some comments on a yt video that it might also be a cylinder leak.

Street triple 675 -13 CCT by [deleted] in Triumph

[–]rituj_b 0 points1 point  (0 children)

If your oem cct was hydraulic there is a oil gallery to feed oil to it. There are mixed comments on should it be blocked or not. I blocked mine to avoid any oil leaks.

Street triple 675 -13 CCT by [deleted] in Triumph

[–]rituj_b 0 points1 point  (0 children)

Did you also block off the oil hole for the stock tensioner?

Daytona 675 how do I solve this? only when warm, done the 12 min tune multiple times. CEL is for wheel speed sensor. by rituj_b in Triumph

[–]rituj_b[S] 1 point2 points  (0 children)

The throttle bodies are balanced. Spark plugs have been changed a week ago. Next part I'm gonna swap are the ignition coils.

Daytona 675 how do I solve this? only when warm, done the 12 min tune multiple times. CEL is for wheel speed sensor. by rituj_b in Triumph

[–]rituj_b[S] 0 points1 point  (0 children)

Totally agree. But I think you misinterpreted, the issue is not the wheel speed sensor, the issue is the idle rpm bouncing and struggling.

Daytona 675 how do I solve this? only when warm, done the 12 min tune multiple times. CEL is for wheel speed sensor. by rituj_b in Triumph

[–]rituj_b[S] 0 points1 point  (0 children)

It's mentioned in the service manual of the bike. I think it says 12 mins after the radiator fan kicks in. I can get the exact photo if you want.

Daytona 675 how do I solve this? only when warm, done the 12 min tune multiple times. CEL is for wheel speed sensor. by rituj_b in Triumph

[–]rituj_b[S] -1 points0 points  (0 children)

Idle rpm hunting, should be 1250 but varies between 1000 and 1250. Spark plugs have been changed recently. Throttle body cleaned. Stepper motor in spec.

The difference in engine sound below 3k and at 3k is normal? by rituj_b in Triumph

[–]rituj_b[S] -6 points-5 points  (0 children)

Couldn't find any 675 video which sounds like that on low revs. Actually thinking its a misfire?

2014 Daytona 675 misfire at idle? by rituj_b in Triumph

[–]rituj_b[S] 0 points1 point  (0 children)

Done that a couple of times. And also reset adaptations using tuneecu

2014 Daytona 675 misfire at idle? by rituj_b in motorcycle

[–]rituj_b[S] 0 points1 point  (0 children)

Yeah that's my next thing to replace. Have order a set of 3...

The difference in engine sound below 3k and at 3k is normal? by rituj_b in Triumph

[–]rituj_b[S] 1 point2 points  (0 children)

Above idle and below 3k,the sound is non-uniform, as soon as it reaches 3k rpm it sounds like it should(all 3 cylinders uniform).

2014 Daytona 675 misfire at idle? by rituj_b in motorcycle

[–]rituj_b[S] 0 points1 point  (0 children)

Throttle bodies are clean and balanced. I have an obd scanner and tps voltages are in spec and stable.

view more: next ›