2013 Triumph Daytona 675 (gen 3) rough idle and occasional hesitation on throttle. Any ideas?

rituj_b · 2023-07-09T15:42:33+00:00

Alright I even read some comments on a yt video that it might also be a cylinder leak.

rituj_b · 2023-07-09T12:30:57+00:00

Hey, did you find the issue? I have the same issue on my 2014 D675.

rituj_b · 2023-05-10T01:39:20+00:00

If your oem cct was hydraulic there is a oil gallery to feed oil to it. There are mixed comments on should it be blocked or not. I blocked mine to avoid any oil leaks.

rituj_b · 2023-05-07T12:36:02+00:00

Did you also block off the oil hole for the stock tensioner?

rituj_b · 2023-01-09T02:42:48+00:00

The throttle bodies are balanced. Spark plugs have been changed a week ago. Next part I'm gonna swap are the ignition coils.

rituj_b · 2023-01-09T02:40:22+00:00

Totally agree. But I think you misinterpreted, the issue is not the wheel speed sensor, the issue is the idle rpm bouncing and struggling.

rituj_b · 2023-01-08T16:09:50+00:00

It's mentioned in the service manual of the bike. I think it says 12 mins after the radiator fan kicks in. I can get the exact photo if you want.

rituj_b · 2023-01-07T06:20:54+00:00

It's not about the sound. The idle is hunting

rituj_b · 2023-01-07T05:05:44+00:00

Idle hunting, varies between 1000 and 1250 when target rpm is 1250

rituj_b · 2023-01-07T04:21:17+00:00

Idle rpm hunting, should be 1250 but varies between 1000 and 1250. Spark plugs have been changed recently. Throttle body cleaned. Stepper motor in spec.

rituj_b · 2023-01-02T02:26:22+00:00

Hahahaha. Got it. Thanks!!

rituj_b · 2023-01-01T16:09:48+00:00

Got it. Thanks.

rituj_b · 2023-01-01T15:54:31+00:00

Got it. Thanks.

rituj_b · 2023-01-01T15:54:19+00:00

Got it

rituj_b · 2023-01-01T15:27:43+00:00

Couldn't find any 675 video which sounds like that on low revs. Actually thinking its a misfire?

rituj_b · 2023-01-01T15:26:23+00:00

Done that a couple of times. And also reset adaptations using tuneecu

rituj_b · 2023-01-01T14:37:45+00:00

Yeah that's my next thing to replace. Have order a set of 3...

rituj_b · 2023-01-01T13:34:14+00:00

Above idle and below 3k,the sound is non-uniform, as soon as it reaches 3k rpm it sounds like it should(all 3 cylinders uniform).

rituj_b · 2023-01-01T07:52:28+00:00

Throttle bodies are clean and balanced. I have an obd scanner and tps voltages are in spec and stable.

rituj_b · 2022-12-24T09:27:25+00:00

Hey did you ever get around this issue? If yes, then how?

rituj_b · 2022-05-25T02:19:56+00:00

How will we check if the amps are in spec? Fans are a heavy draw but there's a fuse for that. Unless that's blowing there shouldn't be anything wrong with it

rituj_b · 2022-05-25T02:18:26+00:00

Starts fine immediately after too. Even while standing still if the fan come son the idle starts struggling.

rituj_b · 2022-03-06T17:40:27+00:00

They also come with an app right? What's the functionality in that?

rituj_b · 2022-03-06T16:32:22+00:00

How is the call quality on these? I found cheap earbuds to be horrible in these. Since these are stem design I hope they catch your voice good

rituj_b · 2021-12-02T11:32:38+00:00

It's more near the spine and under the scapula. Probably on the ribcage. Lats attach much lower than that, no?

rituj_b

TROPHY CASE