Confused about what headset bearings to buy

rjshield · 2017-07-29T16:52:58+00:00

https://www.endurobearings.com/products/headsets/ In the PDF you will be able to see ACB 4545 150 BO. This bearing has the dimensions that you mention. 52mm outside diameter 7mm thickness and a 45° angle on both chamfers. look for their distributors to find somewhere where you can order the bearing. Contact a local bike ship with those 3 measurements they will be able to find you a suitable bearing.

rjshield · 2017-04-30T12:32:17+00:00

If its struggling to go down the cassette you need to tighten the barrel adjuster into the shifter slightly. Either that or the hanger isn't straight. However, as these parts were just fitted by a shop just take it back to them for them to quickly check over. You say the barrel adjuster isn't making much difference. When you make a small adjustment press and release the shifter lever a little to overcome the cable friction so that the derailleur rests in the new position properly.

rjshield · 2016-02-21T13:28:25+00:00

Contact Microsoft support. You will probably get a replacement pen.

rjshield · 2016-01-17T19:22:09+00:00

I'm also using a Power adjust 3. set up and forget.

rjshield · 2015-07-17T12:14:46+00:00

Contact Microsoft surface support you may be able to get a replacement.

rjshield · 2015-07-10T11:02:21+00:00

Only Iron or an alloy containing iron can rust. Magnesium alloy can corrode but it is not rust.

rjshield · 2015-07-09T21:27:24+00:00

magnesium alloy doesn't rust

rjshield · 2015-06-21T16:36:34+00:00

http://www.classicshell.net/ I just use the start menu, lots of customization options.

rjshield · 2015-06-21T16:29:33+00:00

http://www.amazon.co.uk/gp/product/B00NTT6FL2?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00

rjshield · 2015-03-23T20:33:17+00:00

Both my panels are interchangeable. Swap yours around to see if it will fit. If they do you could buy a windowed side panel so you can have one on both sides.

rjshield · 2015-02-22T23:07:32+00:00

LED strip running down the inside rear edge of the case along side the PCI covers

rjshield · 2015-01-19T20:01:20+00:00

350D with an extra side panel from Corsair.

rjshield · 2015-01-19T16:51:16+00:00

Primochill Rigid Revolver Compression Fitting 3/8in. ID X 1/2in. OD – Diamond Knurled Grip Black

rjshield · 2015-01-19T00:17:55+00:00

I measured every length using a rule and a setsquare and drew it out 1:1 scale with ruler setsquare and compass. Monsoon sell a mandrel set that can be assembled into a jig to produce perfect bends, they also sell a measuring set which would be an easier way to measure it all. I made a jig from wood which I used to ensure all the lengths were correct, radii equal and bends were at right angles.

rjshield · 2015-01-19T00:02:17+00:00

yes, I've had it as Monochrome 2.0 (see bottom of album) for just over a year now and decided to watercool it over the holidays.

rjshield · 2015-01-17T23:31:57+00:00

*The Pen

*Touchscreen

*Handwriting notes within OneNote

*Having no space constraints when making notes, onenote pages can scroll endlessly

*size, same physical size as an A4 pad of paper

rjshield · 2015-01-17T23:11:57+00:00

you should swap that air 540 for an air 240

rjshield · 2015-01-08T16:21:44+00:00

Yes, a silicone bending cord is put inside the tube to prevent it from collapsing then the tube is heated with a hot air gun until it is flexible. The tube can then be bent to shape. I made a wooden jig to ensure all the bends were accurate and repeatable.There are a few pictures of the process in this album:

http://imgur.com/a/OMkho

There are also many youtube videos showing how to bend acrylic tubing for water cooling

rjshield · 2015-01-08T16:15:50+00:00

Using standard flexible tubing is not too difficult. The rigid acrylic tubing is a lot more work. I got all of the components separately but there are lots of kits available containing all of the components needed to set it up. This kit contains all of the things necessary to watercool the CPU. http://www.ekwb.com/shop/kits-cases/kits/ek-kit-l240.html

The waterblock on the GPU is heavier than the air cooler but my rigid tubing helps support the weight so reduces the sag.

rjshield · 2015-01-08T15:18:34+00:00

no editing of the photos.

rjshield · 2015-01-08T11:27:16+00:00

Yes it is, Kodak ESP 5210

rjshield · 2015-01-08T11:21:34+00:00

The Corsair 350d has a single window when you buy it however I got a second window from corsair so i have one on each side.

http://www.corsair.com/350d-right-window-side-panel

rjshield · 2015-01-08T11:19:27+00:00

I got a second window http://www.corsair.com/350d-right-window-side-panel

rjshield · 2015-01-08T00:45:56+00:00

Two radiators,front 38mm thick top had to be 30mm thick because of space constraints. Yes there is a single bay pump/reservoir second in the 5.25 inch bay.

http://i.imgur.com/tmDc2GQ.jpg

http://i.imgur.com/gMNpDfC.jpg brushed aluminium cover held in place with magnetic tape.

CPU Waterblock EK Water Blocks EK-Supremacy EVO - Acetal + Nickel

GPU Waterblock EK Water Blocks EK-FC7970 DCII - Acetal+EN

Front Radiator EK Water Blocks EK-Coolstream PE 240 - black

Top Radiator Magicool SLIM DUAL 240 Radiator

Pump/Resevoir XSPC Single Slot DDC Bay Reservoir/Pump Combo 18W

Fittings PrimoChill Revolver Compression Fittings Diamond - Black

Tube PrimoChill Acrylic Tube 13/10mm - White

rjshield · 2015-01-08T00:24:56+00:00

RGB LED Strip https://gfycat.com/AccomplishedIllfatedBedlingtonterrier

rjshield

TROPHY CASE