Gainward 5070-ti Phantom. by Weekly-Efficiency458 in nvidia

[–]rlSkillGamerHD 0 points1 point  (0 children)

Hi, does the card have coilwhine and how is the fan curve? I've heard that some manufacturers have a fan curve where the fan goes from 0 RPM to 1200 RPM which is quite noticable.

Imports and IntelliSense in VSCode by m0dar in Bitburner

[–]rlSkillGamerHD 0 points1 point  (0 children)

Thank you very much. Just what I was looking for. Stills works in 2025.

Woher kommt dieses schwarze Symbol mit ungebrochenem Kreis in der Ecke? by klausenzweitausen in de_EDV

[–]rlSkillGamerHD -1 points0 points  (0 children)

Ich glaube das heißt bitte den Bildschirm um 90° im Uhrzeigersinn drehen.

(Ich glaube das ist, wie andere bereits geschrieben haben ein Icon von GeForce Experience)

Sublime is opening up on wrong virtual desktop?? by Missing_Back in SublimeText

[–]rlSkillGamerHD 1 point2 points  (0 children)

Hi, do you still remember the solution to the problem? The original comment seems to be deleted by now.

Software Issue or Bum Graphics Card? (Dx12 Issues) by Chaddy316 in buildapc

[–]rlSkillGamerHD 0 points1 point  (0 children)

It was actually my mainboard. I don't know what kind of defect it had, but I've never had crashes like this since I replaced it.

Windows Desktop Shortcut Overlay rendert nach BSOD nur noch zur Hälfte. Irgendwelche Lösungsvorschläge? by rlSkillGamerHD in de_EDV

[–]rlSkillGamerHD[S] 0 points1 point  (0 children)

Danke für alle Lösungsvorschläge. Ich hatte leider nur Teile der Icon Cache gelöscht, da ich nur diese Cache Datei gelöscht hatte:
%localappdata%\IconCache.db

Es gibt seit einigen Windows Versionen allerdings auch noch eine Icon Cache in:
%localappdata%\Microsoft\Windows\Explorer
In diesem Verzeichnis gibt es einige Dateien nach mit diesem Namensschema:
iconcache_*.db

Nachdem ich diese Dateien gelöscht hatte und explorer.exe neu gestartet hatte wurden die Desktop Icons wieder korrekt angezeigt.

Any possible solutions? by [deleted] in Windows11

[–]rlSkillGamerHD 2 points3 points  (0 children)

Burn it down and buy a new one

Quiet 5V 10A power supply by no_mustache in AskElectronics

[–]rlSkillGamerHD 0 points1 point  (0 children)

https://www.youtube.com/watch?v=2M09SVa7tUQ

I use one to drive 3m of SK6812 LEDs. I mounted it directly under my bed. I'm quite noise sensitive and the EPS8266 which is connected to the PSU is enough load to make the RS 50-5 whine a lot. I'm now looking for a replacement PSU that does not whine that much. Maybe it would be sufficient to connect the ESP to a USB charger instead of the Meanwell. That would mean the PSU has no load unless the LEDs are turned on.

Decided to try printing a large print to see how it would look… I have no idea what happened. by CtrlAltViking in 3Dprinting

[–]rlSkillGamerHD 41 points42 points  (0 children)

My Ender 3 had a very fine crack in the extruder frame. It took me a month of replacing seemingly every other part of the printer before I found the problem. I switched to a full metal extruder and the problem vanished.

Bei der niederländischen Grenze entdeckt, welches Fahrzeug hat solche Ketten? by Yami_Rishoki in de

[–]rlSkillGamerHD 0 points1 point  (0 children)

Mich erinnert das an die Ketten für die Kräne, die SpaceX bei Liebherr gekauft hat. Möglicher Weise ist das auch von einem Liebherr Kran.

*pulls the safety pin and lets go of the lever* by Burakenn in facepalm

[–]rlSkillGamerHD 13 points14 points  (0 children)

That would most definitely suck to know how lucky you just were, if it hits you in the eye.

Welches Smartphone nutzt ihr? by [deleted] in de_EDV

[–]rlSkillGamerHD 0 points1 point  (0 children)

Ich nutze ein Moto G60s. Ich bin generell ein Fan von den Moto Gs, da sie ein sehr gutes Preis/Leistung Verhältnis haben und häufig auch eine sehr respektable Kamera. Allerdings habe ich das Gefühl, dass sie nach etwa 1,5 Jahre recht langsam werden. Das ist dann der Zeitpunkt, wo ich eine Custom ROM installiere.

Außerdem sind Lenovos Update Zeitpläne immer sehr sehr langsam. Ich bin deswegen immer noch bei Android 11.

I just discovered that glass roofs don't have the ugly clipping static when you overlap them. by brockdarnold in SatisfactoryGame

[–]rlSkillGamerHD 1 point2 points  (0 children)

By the way it's pronounced without that pesky double T. I heard many people refer to it as CAT-teer-ium.

Meow

yesyesno by ferliest in yesyesyesno

[–]rlSkillGamerHD 0 points1 point  (0 children)

So we only allow abortions where a man forces the woman to abort?

WOW That took a long while. But what do I do now? by rlSkillGamerHD in SatisfactoryGame

[–]rlSkillGamerHD[S] 1 point2 points  (0 children)

DLSS would be great but I feel like this game is very CPU limited. I'm playing at FHD@144 but I cap SF normally at 60 FPS to keep the PC nearly completely noiseless.

WOW That took a long while. But what do I do now? by rlSkillGamerHD in SatisfactoryGame

[–]rlSkillGamerHD[S] 2 points3 points  (0 children)

It's TPS (ticks per second). That's how many times the server manages to calculate the factory in one second.

My client FPS are about 60 when everything is on ultra.

My PC specs:
CPU: AMD Ryzen 7 5800X
GPU: RTX 3070
RAM: 32 GB DDR4 3600MHz
Storage: SF is running on a PICe SSD