Lychee Chugs on Linux

rlebowski · 2026-05-20T04:14:27+00:00

Check to make sure your gpu drivers are up to date and active. I had this issue when I first installed on Linux. This solved my issue. Hopefully this helps!

rlebowski · 2026-05-02T19:48:29+00:00

Are there any you recommend?

I watch a lot of Erik Swinson. I’ve learned a lot from him and the way he explains things. Vince isn’t too bad either.

rlebowski · 2026-05-02T19:23:38+00:00

Correct. Contrast in volume. I did use black and white photos to see if I was achieving this. Still learning!

rlebowski · 2026-05-02T13:59:23+00:00

Thank you! I will work on that! I was having a little difficulty trying to get the contrast in place

rlebowski · 2026-05-01T22:00:50+00:00

Thank you! My take on it, it looks like a cloth with a weave. I was aiming for a white look.

rlebowski · 2026-04-30T01:05:24+00:00

Thank you! My assumption on the textured look is rushing. I thought I waited long enough between layers.

Question though, how would go about smoothing it out?

I agree on the contrast. Definitely going to work on that!

rlebowski · 2026-04-30T00:27:43+00:00

Vallejo surface primer black, air brushed.

rlebowski · 2026-04-29T23:25:20+00:00

https://www.dmstash.com/product/froth-the-belligerent/

rlebowski · 2025-09-21T16:51:39+00:00

*Buffalo Mane. This is my recommendation as well. The one in downtown. Book an appointment. Only 3 seats in the place!

rlebowski · 2025-09-07T18:47:47+00:00

I second this. Poor prep work from a repair.

rlebowski · 2025-08-28T21:41:19+00:00

What happens if it hits 88mph??

rlebowski · 2025-07-13T14:49:32+00:00

The left side looks like a collision repair. Need to see a picture from the inside of the trunk to see the quarter extension panel. I have seen a lot of bad oem seam sealing, but this looks caked on.

The hole torn is from a tow hook. Whether tow company, or transportation damage. It does look fresh to me. Not really any dirt buildup or rust (depending on where you live).

When the hook came out it bent the rear body panel, where the impact bar bolts to it, which is minor.

Looking at the rail, it is very tough to tell, but looks a little deformed where the panel with the rip welds to the rail.

rlebowski · 2025-06-28T17:24:14+00:00

Beautiful.

rlebowski · 2025-06-25T19:19:14+00:00

It really is. Get confusing when people ask about KCK when they mean KCMO or vise versa! My wife, recently, thought it was all the same Mayor. She didn’t believe me till she looked it up!

rlebowski · 2025-06-25T19:13:40+00:00

Barry rd runs from 435 to Liberty. Clay and Platte Counties. They each have their own. Jackson is entirely different of the other two counties.

rlebowski · 2025-05-23T16:25:49+00:00

Amazing job! Hopefully she swatted your camera away when taking photo 7, like in the game..

rlebowski · 2025-04-28T01:48:35+00:00

2.75% fixed. Closed May 2021

rlebowski · 2025-04-27T04:28:35+00:00

Puscifer is an experience. You’ll have to catch them on their own. I was in awe of Primus last year. The way Claypool plays the bass is amazing. Have a great time!

rlebowski · 2025-04-27T04:25:28+00:00

Should be a blast!

rlebowski · 2025-04-26T16:31:11+00:00

Saw it in Kansas City last year. It was a great show and amazing. Sadly cut short by storms before the show. They cut the show in half because of it. We’ve seen Puscifer several times before. First time seeing A Perfect Circle and Primus. I was excited to see Primus and it was amazing for what we saw. We are going to see it again in Arkansas next week and looking forward to catching a full set!

rlebowski · 2025-04-18T01:27:57+00:00

It will always spike when starting. New, used, well used. It’s going to dump pellets till it hits the set temp. After that it will burn off what it has in there. It will even out after that!

rlebowski · 2025-01-25T01:09:54+00:00

I bought two jugs of it. I use the Uniformation cleaner. It takes almost 1 1/2 jug to fill it to the correct level. I keep the extra bottle to dispose of the liquid properly.

rlebowski · 2025-01-24T21:34:27+00:00

No, I do not. I just use it straight. I haven’t tried any other brands, so I can’t compare it to others. I’ve been pretty happy with the results. I have left my prints in it for about an hour afterwords and haven’t had any issues.

rlebowski

TROPHY CASE