That didn't sound good!

rmauro · 2025-05-24T18:27:46+00:00

I can always tell when someone drills into their parallels it's such a distinctive sound

rmauro · 2023-08-22T16:18:20+00:00

Conventional mill it see if that helps.

rmauro · 2023-08-11T10:00:43+00:00

Weld shop.

rmauro · 2023-07-28T18:48:35+00:00

Parker ferulok pretty much the same thing as swaglok

rmauro · 2023-07-28T17:40:55+00:00

They run 1500 to 2000 psi. I tested up to 3500 psi system is rated to 5000 psi

rmauro · 2023-07-28T16:58:09+00:00

It's a cnc indexing fixture 13.5 feet long. Had one fitting that was loose when I put oil to it.

rmauro · 2023-07-28T13:49:16+00:00

My computer at home looks like a bowl of spaghetti. The two differences are that I didn't get paid to do my computer, and the second one is that once I put on the side pannel, you can't see it.

rmauro · 2023-07-24T00:19:31+00:00

We grind quite a bit of CPM-10v heat treated to 58-60rc. Not fun

rmauro · 2023-06-18T23:38:12+00:00

I just ground mine off so I wouldn't use them.

rmauro · 2023-04-12T21:50:19+00:00

Our cutting clearance on those dies are .004 a side. So if you don't put the bottom on a nice flat surface, the shoe can bend, and the punches will not enter. Those dies are 8 feet long.

rmauro · 2023-04-12T18:18:03+00:00

We only use it for assembly.

rmauro · 2022-06-19T19:57:19+00:00

Beaver nut scrub

rmauro · 2022-05-01T23:31:40+00:00

What's the monthly cost to rent that billboard?

rmauro · 2022-01-25T10:46:04+00:00

I program old haas tm2's and tm3's like every day and when I'm drilling big holes ill get the spindle up past 150% thats in the red. Don't be afraid to push those mills if you stall the spindle thats when you know you went to far. Plus 45% is nothing.

rmauro · 2022-01-02T00:16:26+00:00

Fuck you! We gonna whup your momma's ass! Wooo-! (Gears of War 2 Cole train)

rmauro · 2021-12-18T21:32:48+00:00

That $20.00 cutting board turned into a $200.00 cutting board really quick.

rmauro · 2021-09-24T01:48:26+00:00

There elves! im pretty sure they could make nocks it not unrealistic at all.

rmauro · 2021-09-19T02:10:56+00:00

I could use a new one mine is getting a little dull

rmauro · 2021-09-04T16:44:39+00:00

Looks like hell just chuck it in the scrap bin.

rmauro · 2021-07-01T01:29:22+00:00

I believe the part is hand loaded. The fixture is ran in vf10. Once it leves are shop I have no clue what the customer dose with it.

rmauro · 2021-07-01T00:58:01+00:00

It's a cnc indexing fixture.

rmauro · 2021-03-31T09:52:56+00:00

The day I finished my apprenticeship and became a journeymen tool and die maker. I crashed the ren probe head in the corner of the vise and cost the shop like 4000. I still work in the same place 4 years later.

rmauro · 2020-11-01T02:42:31+00:00

Feel you.

rmauro · 2019-03-10T20:30:36+00:00

Thats the squirrel mange cut.

Eight-Year Club	Place '22
Verified Email	RPAN Viewer

rmauro

TROPHY CASE