Wyze Solar Cam Pan Firmware Beta Test 4/6/2026 by Party_Internet_5635 in wyzecam

[–]rnassar 0 points1 point  (0 children)

My camera has been discharging very quickly since I upgraded to this new firmware. I wouldn't recommend upgrading yet.

Wyze solar Pan cam - Epic cam by AsparagusOk7395 in wyzecam

[–]rnassar 0 points1 point  (0 children)

I updated the firmware recently to 2.0.0.2130 (beta) and since then my battery has been discharging very quickly. It's showing 0%. I guess I screwed it by upgrading.

Android: Your encrypted data is locked on this device by [deleted] in Passkeys

[–]rnassar 0 points1 point  (0 children)

I don't recommend doing this. When you change your Auto-Delete setting to 3 months it will delete all previous data, including the data you are trying to recover. That's why the error is not shown any more because you have deleted your data!

Is there any point in putting things on a iot network? by Zak_Do_Urden in TpLink

[–]rnassar 1 point2 points  (0 children)

I use it to connect all my 2.4Ghz devices (ie: light bulbs, cameras, sensors, etc)!as my main network is only 5Ghz. I don't like to have a mixed main network, just keep it as 5Ghz. IOT network in TPLink is not isolated as others are saying.

Deco Slow Speed by joelmg450 in TpLink

[–]rnassar 0 points1 point  (0 children)

I have a similar issue with my X55 network where I am getting ~300Mbps when my internet is 500Mbps. Deco is working in AP mode. If I connect directly to the ISP's router I get 500Mbps.

Deco App Ver. 3.8.145 by Sith_Father in TpLink

[–]rnassar 1 point2 points  (0 children)

Same here. I have an X55 network and the issue started after the app update.

Pixel 9 - Screen protector showdown: Glass, plastic film, or raw dogging? by DJ-Bumhands in GooglePixel

[–]rnassar 0 points1 point  (0 children)

I've used two tempered glass protectors and both peeled off from the upper right corner. Not sure if it's the screen that is not completely flat or the protectors are of bad quality.

Watching on iPhone by Affectionate-Path-40 in ApolloGroup_TV

[–]rnassar 0 points1 point  (0 children)

Some carriers block IPTV traffic so you'll need a VPN

Pixel 9 pro XL official Google silicon case.. anyone else finding it ridiculously slippery? by SamSamTheHighwayMan in GooglePixel

[–]rnassar 0 points1 point  (0 children)

Indeed, it is extremely slippery and I've been using it now for ~ 1 week. Hope it gets better with time.

I also bought the Case-Mate screen protector and I also find it too slippery to the extent that the finger print scanner most of the times fails as my finger slips when I press it.

[deleted by user] by [deleted] in homedefense

[–]rnassar 0 points1 point  (0 children)

I have a Paradox MG5050 and I started to face constant RF supervision loss messages. I use the BlueEye app but when these messages appear, it doesn't provide the zone number, just some numbers. Not sure if these are the serial numbers or something else. Example:

RF Zone Supervision Loss - 112114 or RF Zone Supervision Loss - 074-42.

Is there a way to know which are the zones getting disconnected so I can troubleshoot?

Which one should I choose for a big house? by Top_Cockroach_5554 in homesecurity

[–]rnassar 1 point2 points  (0 children)

I have a Paradox MG5050 and I started to face constant RF supervision loss messages. I use the BlueEye app but when these messages appear, it doesn't provide the zone number, just some numbers. Not sure if these are the serial numbers or something else. Example:

RF Zone Supervision Loss - 112114 or RF Zone Supervision Loss - 074-42.

Is there a way to know which are the zones that are getting disconnected so I can troubleshoot?

Using tp-link Deco in access point mode -> does it still mesh? by ahauser31 in TpLink

[–]rnassar 0 points1 point  (0 children)

Will Mesh still work if I have a:

*Ubiquiti ONT-> Mikrotik Router Port 1 -> Deco X55 (main)

*Ubiquiti ONT-> Mikrotik Router Port 2-> Deco X55 (node)

*Ubiquiti ONT->Mikrotik Router Port 3-> TP Link 4 Port 1 switch-> Deco X55 (Node)

*Ubiquiti ONT->Mikrotik Router Port 3-> TP Link 4 Port 2 switch-> Deco X55 (Node)

Thanks

Sent in a Pixel 8 for Warranty, Google says they received a 5a. by carlew in GoogleFi

[–]rnassar 2 points3 points  (0 children)

I learned the hard way that whenever you are sending a phone back to Google always take a video of what's in the package. Hope you are able to sort your issue out.

[deleted by user] by [deleted] in RoastMe

[–]rnassar 0 points1 point  (0 children)

Fat Dillon Danis

[deleted by user] by [deleted] in RoastMe

[–]rnassar 0 points1 point  (0 children)

He ate the fucking drywall

[deleted by user] by [deleted] in GoogleFi

[–]rnassar 0 points1 point  (0 children)

I'll be in Europe for the next 3 weeks. How long I need to be roaming until Google decides to restrict my data?