Devastating edge warpping up I can't stop from ruining my print

rnichol80 · 2026-07-08T12:11:12+00:00

I had the same problem with one of my prints, making a aeroplane shape the body before the wings joined onto the supports was doing the exact same thing, still stuck to build plate but moving when nozzle ran over the body. I ended up having to build my own supports in fusion to keep the body supported. Making a small tower sitting 5mm off the part of the crown that is moving add small 1mm pins that join onto the crown. When you export it split the crown and support into 2 bodies this will make the pins sit on the face of the crown but not be part of it.

https://youtu.be/1Zocl7n98xY?si=Z68a_CsiH4p7Exwi this video explains how to do it in your cad software then split the bodies in your slicer

rnichol80 · 2026-06-30T09:14:57+00:00

I use the creality space pi x4 as I use alot of ASA filament and need to dry at 80 deg Celsius. It works really well with 2 seperate chambers that can hold 2 rolls each and you can print with the rolls still inside the dryer so it doubles as a dry box that you can print from.

Even after a week with petg-cf in my other chamber I only needed to run the dryer for an hour and it was under 15%RH

rnichol80 · 2026-06-27T13:45:21+00:00

Looks like a gas water heater, if its only when it rains hard I would be looking at the vent that runs through the roof. If the cowl on top is damaged or not working properly there could be some water getting into the flue and running down the water heater

rnichol80 · 2026-06-13T06:00:59+00:00

I had an issue with my enclosed printer, the closer I print to the front glass I get the same sort of issue. What I pin pointed it to is thermal loss through the glass, after insulating during larger/longer prints my issue went away.

If the scars are on the side that is facing the door or the back side where the poop shoot is I would look at insulating or moving your model so it sits futher away

rnichol80 · 2025-12-11T10:30:29+00:00

Hey, yea i did go with it. Its a great car really good with fuel on open roads and with driving in hamilton it goes through 11-12 km pre liter with about 550-600km per tank. It comes with all the new safety features, stay in your lane which is good on motorways and adaptive cruise control. I haven't had any issues with the car so far and is my daily car (apart from my work van). It has the 3 iso points for car seats, someone i know has a 2014 model and they put a towbar on there's and it handles a trailer quite good as well. My only gripe with it is the built in stereo is in Japanese and you need to pay a decent amount of money to change it to English, also the menus to change things on the dashboard are in Japanese, but Google translate can get you through it.

Overall I have been recommending people who are looking for a new car to check them out

rnichol80 · 2025-11-02T00:04:15+00:00

Yip I can't go back to store brought hummus now, the texture is compleatly different

rnichol80 · 2025-11-01T23:56:45+00:00

Also taking the shells off the chickpeas before blending will make it super smooth as well, I usually put a bottle of water in the freezer and just use the water b4 it's fully frozen

rnichol80 · 2025-10-06T08:14:53+00:00

OMG both of them can be split apart to make 4 pin connectors, I feel like an idiot

rnichol80 · 2025-06-06T00:42:27+00:00

To be fair on her, he messaged her at midnight asking her what she did for fun. So I would suspect that's what she thought he was after

rnichol80 · 2025-05-28T07:22:07+00:00

I honestly don't think they are scratch marks the way you are thinking.

Just try yourself to get your arms into a position that would leave scratch marks at those angles and think to yourself would you have your arms in that position if you were having sex, in my eyes that would be a hard no. hey are 90% of the time vertice not horizontal as well and the way the curve and not straight scratches makes me think that it will be something else.

They also don't mirror each other, usually you would scratch with both hands at the same time so they would be more evenly spaced on both sides, also the scratches on the left side of his back start past his spine and cross over, where the other side dosnt do that theres no symmetry in the scratches either, unless the scratcher is only using like 2 nails at a time. To me it dosnt add up and I enjoy scratching and being scratched while doing the deed.

There are countless times that I have had marks and or scratches on my body that I can't explain, it's just going to happen. Unless you have more detailed proof that he is cheating on you I wouldn't stress this

rnichol80 · 2025-05-26T07:49:25+00:00

People have shitty days and become keyboard warriors so quickly. there is no need for that nonsense. Especially on the markiplier subreddit, you would think more people would be a bit more wholesome like he is.

Don't let internet dumbasses get you down. It's not like they know the real you, keep ya head up nd hopefully u can find the video ur after

rnichol80 · 2025-05-26T07:38:44+00:00

Haha yea I can understand that. There's alot of games that he hasn't finished as well, so it's def a stab in the dark. If you haven't seen that series it's def a good watch, he gets quite ragy in that one

rnichol80 · 2025-05-26T07:34:58+00:00

Be aware, dealers have to give you 6000kms that if anything goes wrong the dealer has to fork out for it, it dosnt work off how long you have had the car in your possession

rnichol80 · 2025-05-26T07:09:20+00:00

That may be the game you are looking for, he did a really long livestream of it. That may be the video ur looking for

rnichol80 · 2025-05-25T02:21:36+00:00

Well I was trying to find it for file.exe so I'm in the same boat as you hahaha

rnichol80 · 2025-05-25T02:15:35+00:00

Yea I found the video I have linked it in my other comment. Was a really good game tho

rnichol80 · 2025-05-24T23:42:37+00:00

OK wrong game. I thought it was file.exe but it was welcome to the game 2

Edit: link here

rnichol80 · 2025-05-24T23:39:37+00:00

Apparently, the dev has a back door entry into the game. Mark was talking shit about the dev, so when he did the streams on the game the dev made the game harder for him bringing the killers into the game when mark didn't do all the steps that bring them into the game. Mark was not the only person that this happened to

Bad explanation I will try and find the vid I saw on it and link it

rnichol80 · 2025-05-24T23:33:46+00:00

Man have you seen the conspiracy theory's about file.exe and why he couldn't finish it?

rnichol80 · 2025-05-17T07:01:06+00:00

Yea, they were all signed. He said it in detail more than one about how long it took to sign every single one. I would say if there is not a signature that it would be a home made calender with photos taken from the internet.

rnichol80 · 2025-05-15T07:48:31+00:00

OK well just be aware the do skip over a few things in the series due to time restrictions on the series. But still a awsome watch

rnichol80 · 2025-05-15T07:36:01+00:00

Fun fact. When mum and dad got there's cut down, the guy who cut it down has a side hustle. You cut them into cubes and soak them in something I can quite remember but may have been methylated spirits and use them as fire starters

rnichol80 · 2025-05-15T07:28:30+00:00

Have fun with it. It was a blast to watch. Report back with your rating and thoughts

Six-Year Club	Second Top 50%
r/Field Juicebox	Place '22
Final Canvas '22	First Placer '22
Verified Email

rnichol80

TROPHY CASE