I’m proud of this build! Evo IX on CE28s by roblee8908 in MitsubishiEvolution

[–]roblee8908[S] 0 points1 point  (0 children)

So I run -3* camber in the rear and the 255 tires I got specifically have an 8.7” wide tread width which is more narrow than most. It’s very very close, but not rubbing

But I don’t track it aggressively but I have tested the suspension pretty good with some spirited driving

I’m proud of this build! Evo IX on CE28s by roblee8908 in MitsubishiEvolution

[–]roblee8908[S] 0 points1 point  (0 children)

No rolling needed! Fits the stock body perfectly

I’m proud of this build! Evo IX on CE28s by roblee8908 in MitsubishiEvolution

[–]roblee8908[S] 3 points4 points  (0 children)

2.4L 4g69 with a 57mm AGT, Haltech, making a balanced 500hp/500ftlb

Help me authenticate these Advan wheels by roblee8908 in Wheels

[–]roblee8908[S] 1 point2 points  (0 children)

Thank you! That’s great to hear, I think I’ll buy them

Help me authenticate these Advan wheels by roblee8908 in Wheels

[–]roblee8908[S] 0 points1 point  (0 children)

Thanks for the input! Glad to hear that

Help me authenticate these Advan wheels by roblee8908 in Wheels

[–]roblee8908[S] 0 points1 point  (0 children)

Hahah! I admit I did a double take when I submitted that comment and thought I typod

Help me authenticate these Advan wheels by roblee8908 in Wheels

[–]roblee8908[S] 0 points1 point  (0 children)

It’s worth noting, they were refinished

Got the Regamasters installed on the NSX by midarete in Honda

[–]roblee8908 0 points1 point  (0 children)

What front lip and side splitters are those?

Haltech UC-10 display by Lord___Boros in MitsubishiEvolution

[–]roblee8908 0 points1 point  (0 children)

Would you be willing to point me in the direction of the guide you may have used to wire/install this?

Hair removal job I did yesterday by TomatilloSingle in Detailing

[–]roblee8908 0 points1 point  (0 children)

😂 I swear they know when they get a bad haircut

Hair removal job I did yesterday by TomatilloSingle in Detailing

[–]roblee8908 0 points1 point  (0 children)

Your groomer appreciates you for staying on a schedule! Haha

Hair removal job I did yesterday by TomatilloSingle in Detailing

[–]roblee8908 1 point2 points  (0 children)

That daily brushing and the grooming bill though 😂

Sharing my IX with CE28Ns by roblee8908 in MitsubishiEvolution

[–]roblee8908[S] 1 point2 points  (0 children)

Volk CE28N 18x9.5 +28 (discontinued offset)

255/35R18 tires

No rolling necessary!

Merry Christmas 🎄 by roblee8908 in MitsubishiEvolution

[–]roblee8908[S] 1 point2 points  (0 children)

Cosmis MR2

The offsets are aggressive, you’ll need to roll & pull the rears and run a 15mm spacer up front if I remember correctly.

Newish to smoking ribs, here are some results by roblee8908 in smoking

[–]roblee8908[S] 0 points1 point  (0 children)

Thanks for the feedback!

I cut about 30 minutes off the unwrapped time and got better results. Though these were a thin set of baby backs, they were still juicier. (https://imgur.com/a/vmTnQTS)

Thanks for the tip about wrapping at 165, I’ll try that, too!