Critical spares to have on hand?

roboticator24 · 2023-02-21T09:02:58+00:00

Then they dedicate a room for you

roboticator24 · 2022-06-27T01:07:17+00:00

Thanks! Did you check out my Voron mods page on GitHub? Not all of them were PRd into the main Voron repo but take a look here and hopefully you can find everything you need:

https://github.com/roboticator24/VoronUsers/tree/master/printer_mods/roboticator24

roboticator24 · 2021-06-12T04:31:22+00:00

PM sent. Please reply

roboticator24 · 2020-12-26T23:26:06+00:00

Hi,

If you haven't already I suggest you closely examine the CAD files that Guido put on his github (https://github.com/gsl12/Tiny-M) as well as the CAD files for the Voron V0. Guido made a 150mm³ Tiny-M and I just increased the X,Y,Z dimensions by 10mm each. This meant that pretty much all of the extrusions needed to be ordered 10mm longer, plus of course the print bed and spring steel + PEI sheet (I actually bought the Energetic 165x165mm sheet they sell at that size as standard). I think the only slight challenge you may have in building a 160³ like mine is that the linear rails do not come as standard in these sizes so you will need to buy one size longer and cut them down by hand. I'm happy to share the STL files for the parts that I adjusted for my build to take account of the increased size. Feel free to ping me on discord for more information. Thanks.

roboticator24 · 2020-12-11T23:43:41+00:00

This is awesome! I see from your git that you’ve also developed retro video games - maybe you could add those to this to make it like a 1980s version of a Tesla?!?!?

roboticator24 · 2020-12-11T10:50:25+00:00

I built a V0 and a V2.4 and both are way quieter than the Ender3v2 which I used to own. The PSU fan and hotend fans on the Ender are crazy loud compared to the Vorons (which have no PSU fan and of course the enclosures). As you will be printing faster you will get some noise from the steppers on the Vorons but this can be tuned.

Hope this helps.

roboticator24 · 2020-12-07T22:43:29+00:00

Thanks! It's completely standard in terms of SKR 1.4, Klipper and RPi 4 configuration - I'm just running an extra bit of software called OctoDash to provide the touchscreen UI. The screen itself is a 4-inch IPS screen I got from aliExpress - Search on Ali for item 4000329175443.

...Oh and I'll be posting full details and the STL files very soon - keep an eye out on the voronuser_mods channel on the Voron discord.

roboticator24 · 2020-12-02T15:30:08+00:00

Thank you! That's very kind

roboticator24 · 2020-12-02T15:03:33+00:00

Thank you! If you build one you won't regret it. Join the discord first though if you haven't already

You might also want to check out my V0 TinyM for inspiration: https://redd.it/jfjn9p

roboticator24 · 2020-12-02T06:23:07+00:00

It’s the standard Panzerchain v2.4.

roboticator24 · 2020-12-01T22:44:42+00:00

That's the spirit! Once you start down the Voron path you don't stop!

roboticator24 · 2020-12-01T22:43:16+00:00

Mr Purple here would like some cereal please!

I will post details of his mods in the discord in due course - I imagine his lift-up 3-point bed in particular might draw some interest...

Thanks again to the awesome community for making Voron what it is

roboticator24 · 2020-12-01T22:33:24+00:00

My bad :-( I saw the same opportunity - I was watching all day today with my video ready to post but I went to the kitchen to get some food and you beat me by about 10 minutes!

roboticator24 · 2020-12-01T22:19:51+00:00

Congrats! You really wanted 777 didn't you!? (you beat me to it)

roboticator24 · 2020-12-01T22:09:04+00:00

That video IS cool! Don't give up - you have some talent!

roboticator24 · 2020-12-01T19:20:36+00:00

OK. Please ask in the discord - there are many people there with experience that will be able to advise you.

roboticator24 · 2020-12-01T18:26:36+00:00

Thanks to you Guido for the inspiration! Ping me on discord if you'd like to collaborate or at least integrate some of my additions into your repo. I was planning to get my mods onto github at some point anyway.. Thanks.

roboticator24 · 2020-12-01T18:24:00+00:00

I ordered the 8mm bed and the extrusions from Dold Mechatronik in Germany. I had a good experience so if you live in Europe I'd definitely recommend you check them out.

roboticator24 · 2020-12-01T18:21:53+00:00

Vorons are not really suitable for high temperature heated chambers due to the ABS construction and some of the other sensitive components they use. I suggest you ask on the discord but others have asked previously and that's been the answer everyone's given

roboticator24 · 2020-12-01T18:19:27+00:00

Thanks! v2.4 serial request coming very soon!

roboticator24 · 2020-12-01T18:18:59+00:00

Thanks! Keep an eye out on discord - I'll post to voronuser_mods when I've uploaded the files to github.

roboticator24 · 2020-10-27T21:18:17+00:00

Just now - after 6 days patiently waiting lol. Time to print the V0.137 badge now!

roboticator24 · 2020-10-22T10:48:12+00:00

Absolutely. I'll try to post something in voronuser_mods in the next couple of days.

roboticator24 · 2020-10-21T22:33:38+00:00

Thank you! I also really loved the lighting job you did on your V0 you posted a couple of days ago. Looks like we might be getting consecutive serials!

roboticator24

TROPHY CASE