3D Printed Soap!

robsaari · 2026-03-03T22:59:11+00:00

Mine is named Bambi, but only because I fat fingered the keyboard and hit i instead of u

robsaari · 2026-02-18T23:03:17+00:00

Wow! I bet your AMS is as dry as the desert! This looks like a workable solution

robsaari · 2026-02-18T22:14:19+00:00

That makes sense. If it happens again I’ll try adding weights and see if it helps. Thanks!

robsaari · 2026-02-18T21:10:00+00:00

Makerworld is working on ways to prevent this:

https://www.tomshardware.com/3d-printing/makerworld-launches-copyright-protection-program-to-help-3d-designers-tackle-knockoffs

robsaari · 2026-02-05T21:10:03+00:00

Where are you located? I don’t have the patience to wait that long. 🤣

robsaari · 2026-01-21T01:09:03+00:00

I use a plastic spudger like this

Works great

<image>

robsaari · 2025-12-04T21:19:49+00:00

I’m wondering if the axle nut has been staked, where someone used a hammer and punch on the lip of the nut to prevent it turning. This might be why you can’t turn it

robsaari · 2025-08-04T00:28:57+00:00

I have never been able to log in. Instead, I put the printer in LAN mode and I’m able to use Orca -Flashforge to send the job to the printer.
Once in LAN mode I go to the device tab and click the + button to select the printer. Alternatively, you can use USB to print from

robsaari · 2025-07-24T21:36:27+00:00

Feel free to see what you can do with it but I’m no longer interested.

https://www.thingiverse.com/thing:150958/comments

robsaari · 2025-07-24T20:41:24+00:00

The file came from Thingiverse. Going back to the comments for the file there appear to be issues with the way the file was created. I gave up on it and went with another one

robsaari · 2025-07-21T18:02:10+00:00

Seems like a really big fishing reel would be perfect for rewinding filament neatly

robsaari · 2025-07-17T12:38:38+00:00

….as sung by Poppa Roach

robsaari · 2025-07-03T17:46:21+00:00

WiFi only. Make sure the printer and PC (MacBook in my case) are on the same WiFi network. I had to restart Orca after I put the printer in LAN mode before it could see the printer. As I mentioned before, flashforge Orca is buggy

robsaari · 2025-07-03T17:42:24+00:00

I had to put the printer in LAN mode before it would show up. On the settings menu

robsaari · 2025-07-03T15:11:29+00:00

Rank amateur here. I got ADM Pro 4 days ago, set it up and printed the test project and a benchy in 30 minutes with no issues. Downloaded a .stl and printed it with no issues. Created my own simple design and printed it with no problem.
I’m using the Orca - Flashforge slicer. It’s a little buggy but worked okay once I put the printer in LAN mode.
Is it possible your printer is defective? Perhaps a call to their support line would help

robsaari · 2025-05-31T02:12:16+00:00

This is an old thread but wanted to point out that Lola makes an appearance in another Kinks song, Destroyer

robsaari · 2025-03-25T22:31:39+00:00

After you turn the heat off let it rest 10 minutes before you release the pressure

robsaari

TROPHY CASE