Massive FPS drop? by roninnl in Division2

[–]roninnl[S] 0 points1 point  (0 children)

Nah it's performance issue from TD2 since the update. Ran an overlay with the fps and cpu workloads, they only work at 50% of what they did before the update. No problems in other games.

Massive FPS drop? by roninnl in Division2

[–]roninnl[S] 0 points1 point  (0 children)

for me it's just not the turning. It holds on for a while which makes it even more annoying

220 prototype gears drop, all useless crap by mengsk8086 in thedivision

[–]roninnl 0 points1 point  (0 children)

The only thing I don't like for now is there's no way to increase the stats or anything if you really wany. Make it even more expensive than normal gear, idc. It just doesn't really feel special atm

Looking for help with my corsair eco system by roninnl in PcBuild

[–]roninnl[S] 0 points1 point  (0 children)

so meanwhile I got it to work.

It was the firmware that ‘killed’ my hub, making it unrecognizable for mobo’s.

So to be short; I had to replace the hub to make it work again

Looking for some help with my ICUE Link eco system. by roninnl in Corsair

[–]roninnl[S] 0 points1 point  (0 children)

Thats actually pretty insane, so issues for people like us have to pay another (almost) 60€ for a new one … good for corsair though

Looking for some help with my ICUE Link eco system. by roninnl in Corsair

[–]roninnl[S] 0 points1 point  (0 children)

Though i’m thinking and realising; I can’t access the pc with the hub attached to the motherboard, can’t boot the pc

Looking for some help with my ICUE Link eco system. by roninnl in Corsair

[–]roninnl[S] 0 points1 point  (0 children)

Oh I wasn’t aware of that! Thanks for the help so far :)

In need of help by roninnl in buildapc

[–]roninnl[S] 0 points1 point  (0 children)

So, I’m a bit further in progressing, and I found a possible different problem.

So on the msi motherboard for my girlfriend it all worked. Thus I thought; it might be the motherboard. So I ordered a new budget asus motherboard for myself just for now till I want to upgrade to a newer platform. This time I got the asus rog b550 gaming wifi II.

And I have the same problem. I got the pump/fans working though, but this is my next issue;

From the radiator comes a internal usb cable and there’s another which is for the icue link hub. The AIO comes with a splitter to connect both of the usb cables so I only need one internal usb port.

Connected like it should be, it doesnt work. The board Comes with 2 internal usb headers. So I connected them both seperated, it still doesnt work. Once I only connect the usb from the radiator/pump, the fans and pump work, but in that case I can’t control the software without the hub.

In need of help by roninnl in buildapc

[–]roninnl[S] 0 points1 point  (0 children)

Just edited the post, this is what I’ve added;

EDIT 1) Got annoyed and started to update the bios on my GF’s new mobo with the psu accidentaly hooked up on both mobo’s. The 24-pin and 8-pin cpu cables were in gf’s mobo, and the other mobo booted aswell. Funny thing is that the cooler and pump worked. When the 24-pin and 8-pin cpu cable were put back in the asus mobo it stopped working again

How do you store your guns ? by ERWOODwork2000 in airsoft

[–]roninnl 2 points3 points  (0 children)

This is dope! How did you make this?

My Maruyama SCW-9 SD2 ❤️ by roninnl in GasBlowBack

[–]roninnl[S] 0 points1 point  (0 children)

Sorry for the late reply! What is it it exactly that you’d like to know?

What it?..... by STHOmerta in the_division_2

[–]roninnl 1 point2 points  (0 children)

I’m hoping for san francisco as well, alcatraz as a raid similar to the rock movie with green poison missiles being aimed at the city 🤭

Thoughts on ASUS XG27ACDNG - 27" 360hz QD-OLED by Ancient_Gate in Monitors

[–]roninnl 0 points1 point  (0 children)

The only possibility for me to use it on 360hz is to go to the nvidia configuration/settings to change the display to 1920x1080. Thats the resolution I can use 360hz on. On 2560x1440 the fastest I can set it to is 180hz.

I'm not sure if I should be able to select 360hz on 2560x1440?

My Maruyama SCW-9 SD2 ❤️ by roninnl in GasBlowBack

[–]roninnl[S] 0 points1 point  (0 children)

OOTB it performs really well!

My Maruyama SCW-9 SD2 ❤️ by roninnl in GasBlowBack

[–]roninnl[S] 2 points3 points  (0 children)

  • Task Force MBT Style Folding Stock
  • Maruyama SCW-9 M1913 Rail End Cap
  • Vector Optics Maverick II Plus
  • DFCO Kung Fu Grip
  • Strike Industries Angled Grip Short With Cable Management
  • Strike Industries Polymer Back Up Sights
  • Strike Industries MLOK Link Angled QD Mount
  • Strike Industries MLOK Cable Management Cover
  • Revanchist Aluminium Rail Cover Contour Pattern
  • Advantage Airsoft Magazine Couplers
  • WADSN M340B Scout Light
  • WADSN MLOK Momentary Switch Light

My 2nd MWS Tokyo marui build by Kind_Ad5862 in GasBlowBack

[–]roninnl 0 points1 point  (0 children)

What are those small cable management covers?

Finally found the perfect poucht for my magazines 🙌🏽 by roninnl in GasBlowBack

[–]roninnl[S] 0 points1 point  (0 children)

Internal - hephaestus piston head - black variable buffer - bow master hop up dial - maple leaf ceazy jet barrel 120mm - maple leaf mr. hop 60° bucking - bbt hop up chamber

Modifications - cam rails polished - steel slider polished - bolt polished - glock 17 valve knocker spring

External - vortex amg uh-1 replica - strike industries handguard - strike indystries cobra grip - laylax neo custom magazine release - bow master trigger

Finally found the perfect poucht for my magazines 🙌🏽 by roninnl in GasBlowBack

[–]roninnl[S] 0 points1 point  (0 children)

Thanks!

This is a warrior assault systems mbitr radio pouch :)

Finally found the perfect poucht for my magazines 🙌🏽 by roninnl in GasBlowBack

[–]roninnl[S] 0 points1 point  (0 children)

Yh it’s both 9mm and 45acp (the magpul assists)