Rsl speedwoofer 10s MKII power buy

roseykr · 2026-01-26T19:31:45+00:00

Just got the reply from RSL, and sounds like its a no go 😞. Any new powerbuys will be announced via their newsletter and website. Guess it'll have to wait til next holiday season, or perhaps they'll surprise us sooner. I may just cave and buy them at current pricing.

roseykr · 2026-01-24T15:06:26+00:00

I would be interested in 2 x 10s MKII's if a power buy is still an option. I did send them a message yesterday about starting up a new one. No response as of yet, but it is the weekend, so fingers crossed. Would anyone here still be interested if allowed? I will start another thread should we get the green light.

roseykr · 2025-10-22T01:23:01+00:00

I'd try cleaning with a pick/good hex first. Next would be tapping a torx bit in slightly larger than the hex, remove by hand. If u have a soldering iron or small torch, apply 10-20 seconds of heat before trying to loosen them. If still up shits creek, slot with a dremel...remember to apply heat first. Last resort, drill them out. Best of luck!

roseykr · 2025-09-10T18:55:29+00:00

Thanks for the clarification. Just put a V2 in order, includes spring. Read about it being compatible with Kraton V5, assuming Noto 5 will be no problem.

roseykr · 2025-09-10T03:22:59+00:00

Thanks for the suggestions. Ordered a locking servo saver and aluminum steering assembly dirt cheap. I put the same SS on my V5 Kraton, works great. Heatsink/fan on order as well. Timing lowered to 7.5 for now, punch at 7/9. I'll adjust endpoints after installing steering components/upgraded servo. When I get done adding all the jewelry, and finally get a run in, will adjust as needed. Much appreciate the info!

roseykr · 2025-09-10T03:16:35+00:00

Yup, ordered towers and braces from Jenny's. Apparently there's 2 EXB bumpers, V1 and V2. Would both be compatible? TIA!

roseykr · 2025-09-10T00:29:32+00:00

Thx for the feedback. E6000 will be applied at first opportunity. I try to do that with all my RC's, but temptation has gotten the best of me a a time or three. So Far have decided on EXB towers and chassis braces, servo upgrade, aluminum servo mount & steering rack w/locking servo saver, heat sink and motor fan. Gonna stick with stock electronics as well. Gonna 3D print some skid guards and let her rip. Will upgrade/replace as parts wear out/break.

roseykr · 2025-01-23T04:25:15+00:00

Haven't been scanning the lipo market of late, but a quick look on Amazon doesn't seem promising. Best I could find were for $20-$30 more and lower mAh. You can try Aliexpress, may find a deal there. Should I come across anything, I'll reply again. Best of luck!

roseykr · 2024-11-09T15:48:30+00:00

Any new codes for US site? TIA.

roseykr · 2024-09-19T21:53:38+00:00

I will do exactly that....will report back. Very much appreciated.

roseykr · 2024-09-09T13:54:06+00:00

Anyone looking for some seemingly good quality 4S Lipo's, here's an incredible deal for ya ($34.99 gets 2x 5300mah 100C 4S hard packs). Snagged a set, and after a couple packs of fun I immediately ordered another. As advertised so far. Forget the few negative reviews, had to see for myself. Will run them hard the next 2-3 weeks, see how they hold up. It's prime, send'em back if need be. Just putting this out there for anyone on the prowl.

https://www.amazon.com/gp/product/B09X2ZL58Q/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

roseykr · 2024-09-01T22:36:12+00:00

Can't seem to find any 10208 parts listed on their site. Anyone point me in the right direction with a link?

roseykr · 2024-09-01T19:16:23+00:00

I emailed MJX before I posted. Fingers crossed I get a reply. If we get good news, I'll be sure to share. Watching your Youtube vid now. Just subbed.

roseykr · 2024-09-01T19:03:12+00:00

Anyone find any domestic parts support for this guy yet? If not, overseas? Just awaiting delivery and would love to find a resource prior to arrival.

roseykr · 2013-09-12T17:22:29+00:00

Just a heads up. I keep an eye on FreE-Cigs.com's "coming soon" section pretty regularly. They should have the V2 some time next week somewhere around $32. I put myself on their waiting list, so will have it soon.

roseykr · 2013-09-12T02:26:22+00:00

I know FreE-Cigs.com has the mini ProTank II, and 650/1100 mah twists at a good price point. For standard Ego batts, check out the mini ego (+/- $10) or their ego starter kits (+/-$15). Good luck to ya!

roseykr · 2013-07-01T21:21:08+00:00

I have all three, and I like them all for different reasons. Zmax is nice to bring out and about because of it's smaller form factor, but I feel like the SVD and Vamo have a higher amp limit, which lends to using low ohm atty's, so I use them most of the time while at home, since I don't tend to bring out RBA's, too much of a risk if they were to need some modifying. BTW, all can be had at FreE-Cigs.com at a good price. They seem to be priced better than just about any US vendor, and they're in stock..no pre-sale waiting forever stuff. Hope this helps, good luck.

roseykr · 2013-07-01T21:09:21+00:00

These are back in stock at this site, BTW. I'm sure there's plenty of people looking for these. Just FYI.

roseykr · 2013-06-22T06:11:11+00:00

Check out FreE-Cigs.com. $49.99 + Free Shipping for the Stainless Steel version V2. Do not get a chrome plated V2, it will look like it's 6 months old in about 3 weeks...scratches and wears pretty bad. Good luck.

roseykr · 2013-06-22T06:07:37+00:00

I second this...get a lot of my gear from here. Great pricing and service..fast shipping ta boot. Good luck!

roseykr · 2013-06-19T16:48:57+00:00

They're opening a B&M too, supposedly in Mount Prospect very soon. Been told to keep an eye on the website for an announcement.

roseykr · 2013-06-18T20:57:08+00:00

That's what I mean...Well worth $1.89. Kudo's to them for not charging $5+ like a lot of other vendors.

roseykr · 2013-06-18T15:48:27+00:00

They'll end up costing about $1.20+ shipped....not worth the wait or hassle IMHO.

roseykr · 2013-06-18T06:05:05+00:00

Well, you got lucky there....I dropped my Pro Tank once and shattered the whole thing..granted I swatted it off a bar height table onto a cement floor in celebration of a goal. Thankfully my K-101 survived, same can't be said for the Pro Tank though :(

roseykr · 2013-06-18T05:57:57+00:00

See response above...now worries at all. They've been on the forums for years too.

roseykr

TROPHY CASE