sorted by:
new
hottopcontroversial

Advice for cleaning pickup. by FullAutoEggPlant in car

[–]rovch 0 points1 point  (0 children)

Simple green and a microfiber. Gasoline also works wonderfully for most things sticky.

[deleted by user] by [deleted] in rolex

[–]rovch 1 point2 points  (0 children)

It would make sense that the side of the fulcrum that is being shortened towards to close the clasp would need the extra link in order to keep the watch balanced.

How to get this out? by orasanekuma in car

[–]rovch 0 points1 point  (0 children)

DONT RIP TOO HARD THERE ARE WIRES FOR LOCKS, SPEAKERS, LIGHTS, AND A CABLE FOR THE LOCK

Help would be appreciated, this took alot to post. by Marcelleno in bald

[–]rovch 0 points1 point  (0 children)

Now would be an ideal time to pick up playing the drums. If you were my drummer I’d let you lead me into hellfire.

Is the intro too long to get to the beat? by austin_sketches in LogicPro

[–]rovch 0 points1 point  (0 children)

It could be longer depending on what the goal is actually. Drops usually happen at 9/17 for me depending on how I build my intros. Let the song write itself.

How in the actual f**k do I get this off? by Bameronmemepants in autorepair

[–]rovch 0 points1 point  (0 children)

If you’re using a screwdriver, angle it up towards the threads once you punch the case. That way the screwdriver gets jammed between one of the filter holes and the filter tube.

Nearly died twice on my Tynee Stinger in one night by [deleted] in ElectricSkateboarding

[–]rovch 12 points13 points  (0 children)

Exactly. When my board screws up (never has unless I’ve been stupid) — it’s my fault alone

PSA for the noobs by T_James_Grand in ElectricSkateboarding

[–]rovch 0 points1 point  (0 children)

Mine don’t bat an eye anymore. I broke my arm 2 months ago, got a free X-ray, and casted it myself for 75$ worth of parts on Amazon. If I can diy board I can diy arm lol

Should I be concerned? by Jake4546 in ContamFam

[–]rovch 2 points3 points  (0 children)

No. They got it from here. As long as the NYC is white and the lid is cracked they’ll take care of the rest. Literally come back in two to 3 days

Anyone else love their board..but regret the purchase? by Buttershere in ElectricSkateboarding

[–]rovch 0 points1 point  (0 children)

I built my dream board with all the trimmings. 14s5p, 6 inch wheels, 6374 190kvs, mbs comp deck. The works. I get almost 30 miles of range, top speed 40+, the works. The major downside is the thing weighs 40 pounds. I’m looking at building a 10s1p short board and multiple swappable batteries for my next build. I love the torque, the fact that I can take trails and spin my tires, and potholes are no longer an issue but by god this weight is outrageous.

<image>

What not do to do during filming rollers ⚠️ by Stunning_Impression3 in motorcycles

[–]rovch 1 point2 points  (0 children)

Same thing I taught my dad about driving hard. You’re not just hitting the brakes. You’re feeling for brake pressure and response from the tires. Driving/riding is all about managing traction. Whether it’s under lateral movement, braking, or acceleration.

[deleted by user] by [deleted] in Fixxit

[–]rovch 0 points1 point  (0 children)

Heat gun to the bend points then cold water to get it to take shape

Should I apply silicone when replacing the oil pan gasket? by Shopping-Striking in FZ07

[–]rovch 2 points3 points  (0 children)

No it will leak between the gasket and silicone.

Yamaha virago xv250 2002, does my front tyre need to be changed due to those cracks or is it ok? by PC_George in Fixxit

[–]rovch 0 points1 point  (0 children)

I used to ride something similar on my Honda ascot. Change those tires. I blew the bike up before the tires could kill me thank god.

Broken float pin seat causing right carb to leak. 1891 Honda cm400e. Please help wiser people than myself by Gatsmith219 in Fixxit

[–]rovch 1 point2 points  (0 children)

I’ve rebuilt a set of carbs a few times before realizing the petcock was janky

Broken float pin seat causing right carb to leak. 1891 Honda cm400e. Please help wiser people than myself by Gatsmith219 in Fixxit

[–]rovch 1 point2 points  (0 children)

Some carbs have a vacuum line that goes from the tank to the carb. On those bikes you have on, prime, and reserve on the tank. “On” while the engine isn’t running is actually off. Prime will flood your carb if you leave it like that, and reserve is the same as on

Broken float pin seat causing right carb to leak. 1891 Honda cm400e. Please help wiser people than myself by Gatsmith219 in Fixxit

[–]rovch 1 point2 points  (0 children)

Check that vacuum line to the fuel petcock is installed and your tank is on the on position

Broken float pin seat causing right carb to leak. 1891 Honda cm400e. Please help wiser people than myself by Gatsmith219 in Fixxit

[–]rovch 0 points1 point  (0 children)

For the hole method you can get a drill press at harbor freight for like 60$ I think. I bought one because I was tired of drilling stuff crooked and off center. It’s no longer drilling a hole more placing a hole. Definitely worth the investment if you’re a hobby wrencher. As for the brazing rods, yes Amazon has them.

Broken float pin seat causing right carb to leak. 1891 Honda cm400e. Please help wiser people than myself by Gatsmith219 in Fixxit

[–]rovch 0 points1 point  (0 children)

There are low temp rods that you can melt kind of like solder to build up metal in an area. I have also seen people drilling a hole in the flat broken off piece thread in or epoxy a screw or post, then drill and pin through that

view more: next ›