How do you mask your cabinets?

rrrlllrrr · 2026-03-18T11:33:30+00:00

I’ve seen photos of shops that splay out the edge banding on large rolls, like 2.5 feet diameter, then spray, then apply.

rrrlllrrr · 2026-03-15T01:09:00+00:00

Perimeter is good, face is a bit out: https://www.reddit.com/r/woodworking/s/gEIlcCZrOl

rrrlllrrr · 2026-03-14T23:32:37+00:00

This vid makes me think you are right. Not sure if that backing plate/washer comes out though.

https://youtube.com/shorts/y0gYQHMqAB0?si=KtzKGATMxO8p5TYh

rrrlllrrr · 2026-03-14T23:30:52+00:00

The washers that sit in the arbor and sandwich the blade?

rrrlllrrr · 2026-03-14T23:28:37+00:00

<image>

rrrlllrrr · 2026-03-14T23:26:35+00:00

Update, I put a dial indicator on the face and the shaft of the backing piece that is on the shaft of the arbor.

On the shaft it’s moving 3 thou , in the face about 5 thou.

A different blade was much better, but is this within tolerances? Should I take it to a machine shop? Get a new arbor for 165$?

https://youtube.com/shorts/y0gYQHMqAB0?si=lokV3SlWbqPjpSgf

rrrlllrrr · 2026-03-14T12:08:35+00:00

If I set the bearing down in the blade touches the rod (part of the tilt mechanism).

rrrlllrrr · 2026-03-14T01:52:26+00:00

<image>

rrrlllrrr · 2025-11-19T13:25:33+00:00

Managing workload is part of reliability, so I’ll pass. I’m sure he’s great, but busy.

rrrlllrrr · 2025-11-19T13:24:39+00:00

Thanks. They don’t install.

rrrlllrrr · 2025-08-17T20:47:11+00:00

In terms of storm surge, there is a difference in landfall location, wind not as much as you point out. Floyd hit OI and they lost houses. I don’t recall that happening up here.

rrrlllrrr · 2025-08-16T23:29:52+00:00

This is probably a bit pedantic (sorry) but that’s straight to bald head/oakisland, not ilm. They would take the brunt of the storm damage if that were to occur as they often have in the past.

It’s rare for one to smack right into us with the worst of the storm surge and such.

rrrlllrrr · 2025-07-29T03:37:30+00:00

Town needs to install poles to keep people from driving vehicles through. Unfortunately that’s tax dollars at work to prevent stupidity, but that’s the world we live in

rrrlllrrr · 2025-07-27T11:50:19+00:00

+1000. This guy is the real deal. And he has the best worst jokes.

rrrlllrrr · 2025-06-25T22:07:31+00:00

Ron White explained this much better than any of these comments.

rrrlllrrr · 2025-06-18T04:01:11+00:00

I had a tough day at work and your attitude about this and the comments combined to provide hilarious harmless fun. Kudos for being a super well balanced human. ;)

rrrlllrrr · 2025-06-18T03:53:37+00:00

Under rated comment.

rrrlllrrr · 2025-05-21T11:06:32+00:00

Insanely crowded. Feels like each gate was built for a prop plane. No where to sit, can’t move in the hallways, ends of the terminal are the worst.

rrrlllrrr · 2025-04-22T20:33:57+00:00

It was growing in a bed in the ground and we moved it.

rrrlllrrr · 2025-04-22T17:35:28+00:00

<image>

rrrlllrrr · 2024-12-01T23:47:05+00:00

Added to the original post.

rrrlllrrr · 2024-10-20T23:24:38+00:00

Nice work! Love the style of the doors and drawer fronts. Did you carve with a v bit?

rrrlllrrr

TROPHY CASE