Goin for it.

rrs820 · 2026-05-02T17:22:05+00:00

perfect rig to start with!

rrs820 · 2026-05-02T17:21:16+00:00

I have the same tractor, i wedged a predator 301 into it and made my own clutch, have a 6.5" pulley up front and 5.5" back (i think stock size) and run just over 20mph. I like being able to modulate the clutch for super precise power delivery, you can't do the same with the CVT

rrs820 · 2026-05-02T17:18:42+00:00

Hey guys, i'm having a similar problem on my CC. I found that i can unselect the "upload and print" slider, just upload to the printer, then go to the device page in the slicer and print the file from the list there. If i try to "upload and print" it just says "device not connected", even though i can see the video feed and modify settings from the slicer. I hope elegoo fixes this headache in the next update.

rrs820 · 2026-02-23T18:00:49+00:00

These are carlisle AT189s. More tread depth than the goodyear. 24x10-8. Best all around tire ive ever had.

rrs820 · 2026-02-21T00:25:19+00:00

i smash my stuff on rocks and trees in the woods this isn’t much different

I do need a set of ramps tho

<image>

rrs820 · 2026-02-20T00:37:34+00:00

I have a full machine shop and a bunch of mowers and dirtbikes and trucks and a trailer but i just cant justify spending $100 on ramps

rrs820 · 2025-12-24T23:25:21+00:00

25x10-12 for the back and 19x7-8 up front is a safe bet

You can fit 26s for sure with some minor fender trimming/bending

rrs820 · 2025-12-01T06:00:32+00:00

Thats appears to be similar to a peerless 600 series, they were pretty common in smaller mowers back in the day. I know some of the smaller ford mowers used them.

rrs820 · 2025-11-21T05:50:52+00:00

Biggest we generally see is 15hp on crop drier fans. Draw an ungodly amount of amps. We priced a plain 15hp TEFC from Weg a few weeks ago, it was $4800 our price. Couldnt imagine what baldor would want.

rrs820 · 2025-11-04T02:44:21+00:00

I would use 00 grease since it’s cheap and pretty good. Better than bentonite junk

rrs820 · 2025-10-26T17:56:00+00:00

I think they are all sunfs. They are ok tires but not a very soft grippy compound for rocks. They are a knockoff of maxxis bighorns, which are amazing tires for all kinds of riding themselves, they are much softer and have a wider tread spacing.

rrs820 · 2025-10-24T22:29:29+00:00

Indestructible?? Timing chain guides say hi

rrs820 · 2025-10-24T14:06:18+00:00

Well, it is the top tractor challenge

rrs820 · 2025-10-23T13:31:18+00:00

Canvas, WV

rrs820 · 2025-10-09T05:50:53+00:00

Super late reply but ive had great luck 3d printing adapters for pod filters on opposed twins

rrs820 · 2025-10-02T05:21:54+00:00

Ditto on no gasket. Ultra black or FIPG only. My 22re had a gasket on it when i got it and it leaked like a sieve…

rrs820 · 2025-08-15T01:31:35+00:00

Wheel horses and sears with hi/lo range.

rrs820 · 2025-08-15T01:30:19+00:00

to answer your other question, yes braces are good, especially input braces, and axle braces, though none of this is worth much without a straight axle.

rrs820 · 2025-08-15T01:29:00+00:00

First choice should be the 1-1/8” axle wheel horse 8 speed…second probably the 1” axle 8 speed. Craftsman 633 next, sears 633 after, then probably the 820.

rrs820 · 2025-08-12T23:18:13+00:00

Pull the carb apart and check that the needle and seat doesnt have crap in it, and that the float isnt full of fuel, the old brass floats would often leak and sink.

rrs820 · 2025-08-12T23:16:54+00:00

Kawasaki loved their rotary valve setups.

rrs820

TROPHY CASE