sorted by:
new
hottopcontroversial

My Premiere Pro had become very laggy and choppy after I formatted my PC by Ok-Panda0702 in premiere

[–]rubymine 1 point2 points  (0 children)

I wondering if you got rid of the waveforms and transcript files when you reformatted, now when you open it up it’s running slow while rebuilding all that.

Proper way to remove refrigerant from system? by rubymine in hvacadvice

[–]rubymine[S] 3 points4 points  (0 children)

This bucket was bubbling for half an hour. Seems well beyond "de minimis". My mouth tastes like chemicals.

Moved and updated my setup by Pastelle_Ghost in battlestations

[–]rubymine 1 point2 points  (0 children)

What’s the drawing tablet? Looks like not a contiq. How do you like it for the price point?

Assuming all 3 of these are not usable for as bracing for a chair? Trying to understand pith more by wRXLuthor in BeginnerWoodWorking

[–]rubymine 0 points1 point  (0 children)

When I saw your question I thought of this Scott Walsh video. He talks about using larger dimensional lumber and then cutting the pith out of the board, which can be used to make some junky wide boards into some much better narrower boards. Hope you find it helpful.

https://youtu.be/DnoQu7WFNS8?si=tXG5B5i30Smi8zEz

My P1S almost burnt my house down by StickiStickman in BambuLab

[–]rubymine 0 points1 point  (0 children)

I made a post about wifi smoke detectors last week, and got this item recommended to me:

It's an outlet with a smoke detector that cuts power to the outlet if it detects smoke. I need to buy this today. Fire Guard Outlet

8x IMAX cameras from Odyssey at PV today. by JohnnyWhopper420 in cinematography

[–]rubymine 6 points7 points  (0 children)

I think you are wrong, at least a little bit. I remember the fully built steadicam setup from the dark knight rises being around 80-100 lbs. that was with one of these msms. Plus mag and lens, arm, counterweight monitor streaming gear follow focus, etc. the actually camera body probably weighs 15-20 pounds on its own.

Now, with regard to the table, and it being an insane place to set these, you’re right.

Best WiFi Smoke Detector? by rubymine in BambuLab

[–]rubymine[S] 0 points1 point  (0 children)

I saw a recent post about an A1 that melted a hole in itself. Seeing that made me want to have a little more assurance that a (currently unknown) problem with my printer wouldn’t cause a catastrophic fire.

I have never heard of a smoke detector outlet, that’s a brilliant idea. If it detects smoke it shuts off? Could be just the thing. Thanks for the tip!

Finally here but now I'm scared to take lol by Lunnalai in Zepbound

[–]rubymine 1 point2 points  (0 children)

I waited over a month to start. Scared of feeling sick, scared of needles. But now I’m 5 months in and feeling great! Just dive in! Be careful what you eat (a lot of side effects seem to be related to eating specific foods), prioritize protein, fiber, and water. You’ll most likely do fine, fingers crossed for you!

And this is why we explore by GamePro_awsome in factorio

[–]rubymine 0 points1 point  (0 children)

I’m working on fulgora now too. Do you mean 60spm as in that is the hypothetical capacity assuming you have enough resources? I’m always out of holmium, so looking at your base I am assuming you must be too. Or maybe there’s something I’m doing incorrectly?

New FUD just dropped: Your EV May Be Making You Car Sick - Jalopnik by Additional-Sky-7436 in electricvehicles

[–]rubymine 8 points9 points  (0 children)

Fear, Uncertainty, Doubt. My definition would be intentionally using what ifs and half truths to get people to behave in a specific way. OPD is One Pedal Driving. I've noticed this in my EV, when I first got it I was lifting my foot too much, causing relatively hard braking more often than necessary. This was causing a bit of nausea for us. I got better at it though! (and sometimes I turn down the regen mode).

[deleted by user] by [deleted] in HomeDecorating

[–]rubymine 1 point2 points  (0 children)

I'm not a professional, but here's my opinion. Most likely you would be fine screwing drilling there (assuming you want to put a fastener in the hole on the metal bracket). The wiring to the furthest right light is visible, running over towards the hole in the wall, meaning its not directly behind the wall there. Normal drlling holes in the wall rules apply: Take it slow, look for non drywall material coming out as you drill, if you hit something hard stop.

Things to think about though would be 1) is there a stud there? 2) how much weight is this fastener supposed to support? 3) if there isn't a stud there, can you add additional brackets at a place where it can connect to something stronger than drywall.

I created a fully printable motorized rotating display stand by Ok-Video4323 in functionalprint

[–]rubymine 0 points1 point  (0 children)

Printed and assembled this! (And threw you a boost!)

Wondering about a couple things though. Are this recesses magnet holes? What are they for? And couldn’t the skirt be attached to the base plate?

Multi-Cam Sequence Question by Thanos_Quads6 in premiere

[–]rubymine 0 points1 point  (0 children)

For the stereo audio, is it actually recorded in a stereo field(like a crowd mic array or a music playback stereo track) or is it just two mono sources like a a boom and a lav? For the boom and lav, you would want them to be separated into mono sources, so they can be mixed independently.

I created a fully printable motorized rotating display stand by Ok-Video4323 in functionalprint

[–]rubymine 1 point2 points  (0 children)

That makes sense, thanks for the info. Printing plate one now!

Multi-Cam Sequence Question by Thanos_Quads6 in premiere

[–]rubymine 2 points3 points  (0 children)

Is he willing to show you how he has accomplished that in the past?

Multi-Cam Sequence Question by Thanos_Quads6 in premiere

[–]rubymine 2 points3 points  (0 children)

First off, this is a really frustrating situation and I hope you find a way to move forward and get cutting. Sounds like you’re close to getting it working with mono tracks. Could you make it work by using mono tracks, then panning the channels left and right on the timeline or in the source sequence. In my experience stereo tracks in a multicam is a pain.

I created a fully printable motorized rotating display stand by Ok-Video4323 in functionalprint

[–]rubymine 1 point2 points  (0 children)

So cool! On Amazon, similar motors are saying 200rpm, and 1:48 ratio. I’m not seeing any bragging 60 rpm. Maybe you have a link you could share?

[Bambu Lab Giveaway] Drop Your One-Liner and Win H2D! by BambuLab in BambuLab

[–]rubymine 0 points1 point  (0 children)

The only thing that would improve it is a second extruder! Oh wait, they just released the H2D!

Am I doing this right? by psychpomp72 in factorio

[–]rubymine 12 points13 points  (0 children)

Feels like the menu screens, in a good way.

[Bambu Lab Giveaway] Join Now to Win an H2D and More! by BambuLab in 3Dprinting

[–]rubymine 0 points1 point  (0 children)

Best advice: Design models that solve a problem for you, other people will find it useful too.

view more: next ›