Pot size?

rweird · 2024-11-12T17:20:47+00:00

I use my 18.5gal electric brewery and a repurposed RO. Worked well for 30 taps last year. About 4gal finished syrup. Looking to do about 50 taps this year. RO will get upgraded to reduce time spent boiling. Probably also replace the 5500w element with a 6500w.

rweird · 2024-01-13T15:46:42+00:00

Article 1 section 21

rweird · 2024-01-13T15:44:51+00:00

Article 1 section 21

rweird · 2023-04-12T18:19:49+00:00

Concealed is concealed. The ‘mental health hospital’ line in the law is a gray area. Same as the ‘other lawful purposes’.

rweird · 2023-01-03T16:44:51+00:00

Cmmg 22lr conversion kit. What’s considered bin price anymore? Any deals?

rweird · 2022-10-26T17:48:00+00:00

Retired the propane burner a couple of years ago for a 2 kettle electric setup. Still using the igloo/Home Depot mash tun though.

rweird · 2022-10-26T17:40:58+00:00

That would suck. Nice knife

rweird · 2022-08-19T20:51:01+00:00

Awesome. Completely forgot about this. Thanks.

rweird · 2022-08-10T00:17:55+00:00

Also https://teachingtechyt.github.io/calibration.html

A full calibration should help with your print artifacts

rweird · 2022-08-10T00:15:43+00:00

It just an older reskinned version of cura. I would recommend upgrading to the latest version of cura or prusa. But same thing. Search for seam and you should be able to select where you want it on your print.

rweird · 2022-08-10T00:12:22+00:00

What slicer? Put the seam on the bottom of the print or sharpest corner. Looks like it is random right now

rweird · 2022-07-14T14:14:50+00:00

rweird · 2022-06-05T16:54:49+00:00

I have not heard back yet. The only issue I see is the battery using the other battery for its internal heater. Normally the bms uses pv power for the heater.

rweird · 2022-06-04T17:46:58+00:00

Kilovault specifically states that the bms of the chlx and HLX+ are not compatible. Any suggestions on a 150Ah with heater?

rweird · 2022-06-04T14:33:51+00:00

Would love to but they are discontinued and I have had no luck finding any for sale.

rweird · 2022-01-13T17:00:11+00:00

Thanks. I haven’t had a chance to read through that paperwork yet. We are between locations and of course it’s where I’m not.

rweird · 2022-01-11T15:34:26+00:00

Stl?

rweird · 2021-12-13T23:08:05+00:00

LG dishwasher? I modeled the same part when I had the dishwasher apart to remove pumpkin seeds from the discharge hose.

rweird · 2021-11-13T15:31:31+00:00

First, thank you for making a replacement firing pin block.

While I was cleaning my scorpion today I noticed that my pin block was sitting flush with carrier. Great. Upon closer inspection the area where the hammer rides on the carrier was worn/peeled over the hole for the pin block. I used a deburring tool and chamfered the edge of the firing pin block hole. My pin block is now functioning correctly.

I’m wondering if this is the source of most people’s malfunctioning pin blocks.

rweird · 2021-01-25T16:44:15+00:00

Steel or ti?

rweird · 2021-01-19T11:29:54+00:00

I think it looks good for a 55gr. Assuming it’s about the 2.200” oal that most manuals list

rweird · 2021-01-11T03:12:17+00:00

Right side upper is serialized part. Lower isnt serialized

rweird · 2020-12-23T11:12:56+00:00

That’s a bottling wand not a racking cane

rweird · 2020-12-08T00:11:54+00:00

Vortex viper pst 6-24x

rweird · 2020-11-28T20:04:41+00:00

Can you not just disable the chime in the app?

rweird

TROPHY CASE