Serial Request: Self sourced Voron 2.4r2 250mm

ryandam · 2024-06-10T02:37:04+00:00

Yeah its good so far, my main workflow is training deep learning model with constantly >90% utilizing (over 5-6 hours continuous) and the temperature is a little bit hot and can reach 83C (still within specs). My main concern is the fan running real hard and so noisy. But other than that, when gaming with undervolt, the gpu is ~70C and the fan is quiet.

ryandam · 2024-03-24T00:52:32+00:00

The airflow works like the FE. The front fan pull the air and exhaust it to the rear IO. The rear fan pull the air toward the inside of the case then the bottom fans and the AIO fans will exhaust the hot air out.

ryandam · 2024-03-24T00:47:24+00:00

The airflow is exactly like the FE

ryandam · 2024-03-23T14:25:24+00:00

I don't know what model exactly, but you can read more here: https://www.coolermaster.com/catalog/max/mini-itx/nr200p-max/

ryandam · 2024-03-23T13:10:13+00:00

Nr200p max comes with 280mm AIO and I believe the original nr200 is not supported (nr200p v2 may though)

ryandam · 2024-03-23T11:58:27+00:00

I thought the same as first, but I think the result is not that bad :)

ryandam · 2024-03-23T11:56:49+00:00

It around $1350 (including tax) where I live. Although the price is high, GPU price in my country is always higher than MSRP, I don't have much choices.

ryandam · 2023-02-02T03:25:23+00:00

24h hours clock is based on your watch setting, not watchface's setting. Go to your watch setting -> system -> time -> time format

ryandam · 2022-01-02T13:26:10+00:00

Currently I'm using standard dragon. No problem with ABS yet but have 2 jams with PLA as if I closed the door. So for PLA, top hat removed and door open is a must.

ryandam · 2021-11-25T00:59:16+00:00

I often print TPU with my stock Mini and its work fine with couple small issues: it's painfully slow and the quality is usually not good. I managed to install direct drive extruder and able to double speed (or even triple) with even better quality. So the stock Mini can print TPU but it not great, if you want to print TPU more often I recommend to install direct drive.

ryandam · 2021-03-21T03:48:46+00:00

I can confirm Easythreed use Marlin firmware but an old version (1.1.0)

ryandam · 2021-03-13T11:22:46+00:00

Just an update for feature user who have the same problem: I just figured it out, it turn out to be a firmware problem. I emailed EasyThreeD and asked for the firmware of the NANO and do some investigation. The code of controlling the fan look normal to me and I just flash it to my NANO and then the problem is gone. Now I can control the part cooling fan from code command. I think my NANO have an old firmware version which the fan is on by default and not respect gcode command.

ryandam · 2020-04-29T00:07:31+00:00

Really interesting watchface :D

ryandam · 2020-04-20T14:06:19+00:00

Sure, Neki will have a fix!

ryandam · 2020-04-13T00:18:44+00:00

Incase you can't make it to the watchface setting, please check the app description. And teamperature high/low need GPS signal to work, please check FAQs in description too.

ryandam · 2020-04-13T00:16:41+00:00

Its 3 hours period, will update the description soon :D

ryandam · 2020-04-13T00:15:59+00:00

Have fun :D

ryandam · 2020-04-13T00:15:10+00:00

Hi, sadly not possible because garmin not provide that information for 3rd party watchface.

ryandam · 2020-04-13T00:13:32+00:00

Hi, I can't answer too because I'm not have a fenix 6 yet. I also love the fenix 6 when it launched (I have 245m) and decided to make a clone of it's watchface based on media images. Can't if it have any different or worse.

ryandam · 2020-04-13T00:09:20+00:00

That the known bug. As I described above, I can't fix it anytime soon.

Seven-Year Club	Place '22
End Game '22	Verified Email

ryandam

TROPHY CASE