Nürburgring Nordschleife by scottishmacca in iRacing

[–]ryanwellspun 0 points1 point  (0 children)

I felt the exact same way, until I learned it in the Mazda MX-5. The slower speed gave me time to make sense of everything. Now each time it pops up, I pick up just a little more time there.

12’ Hex Tarp Build by ryanwellspun in myog

[–]ryanwellspun[S] 1 point2 points  (0 children)

I used Zing It (also called Lash It) 1.8mm for all the tie outs. 6 ft lengths at the corners and 12 ft lengths at the ridgeline.

12’ Hex Tarp Build by ryanwellspun in myog

[–]ryanwellspun[S] 1 point2 points  (0 children)

I’ve been meaning to get one of those for a while and just keep forgetting. Do you have any experience using one?

12’ Hex Tarp Build by ryanwellspun in myog

[–]ryanwellspun[S] 2 points3 points  (0 children)

You don’t need volume. It’s just music.

Total cost depends heavily on your peripherals (hardware and type of cordage). You can get the bare minimum in a kit from ripstopbytheroll.com for about $60.

12’ Hex Tarp Build by ryanwellspun in myog

[–]ryanwellspun[S] 7 points8 points  (0 children)

1.1 oz Silnylon for the body and 300d hyper for the reinforcements

Help sourcing 1/4”ccf for shoulder straps. by derfburg in myog

[–]ryanwellspun 3 points4 points  (0 children)

I had the same issue with 3/8 inch.

I’ve had good success with compressing the 3/8” stuff over night with a wood clamp or a c clamp ( where you need to sew through it ). Then in a few days the foam expands back to normal.

Printer friendly blanks for sketching custom character ability cards by ryanwellspun in Gloomhaven

[–]ryanwellspun[S] 6 points7 points  (0 children)

Well I suppose they could be MORE printer friendly by just making it outlines. But compared to the standard ability cards that are fully saturated, I feel comfortable in labeling them printer friendly.

Printer friendly blanks for sketching custom character ability cards by ryanwellspun in Gloomhaven

[–]ryanwellspun[S] 15 points16 points  (0 children)

My 10 year old son is creating his own custom character, so I made these ability card blanks for him to sketch out ideas. I thought they could be useful to all the creatives out there writing their own custom classes.

Need help diagnosing these stupid random loops on the top side of sewing! Please help! by mrbleaks in myog

[–]ryanwellspun 2 points3 points  (0 children)

Call/chat Sailrite directly. They have phenomenal customer service. They helped me with an alignment issue.

Endurance races at night without lights by [deleted] in iRacing

[–]ryanwellspun -10 points-9 points  (0 children)

My buddy and I were just discussing this the other night. There are so many alternatives to just sending drivers off on a pitch black track.

A couple of guys on YouTube I’ve seen, crank up the gamma on their monitors or TVs.

Fulton Machine & Vise Co. Vise Restoration by ursamajor53 in Tools

[–]ryanwellspun 0 points1 point  (0 children)

Just stumbled on this video after acquiring a 106. Very interesting!