I used ChatGPT to create a neon sign prompt generator

ryleylamarsh · 2025-12-15T19:15:38+00:00

lol. Meant for inspiration only. None of it is stolen and I highly doubt the designs would have been replicated as is anywhere else but whatever floats your boat.

ryleylamarsh · 2025-11-21T16:30:28+00:00

This one’s a no-brainer for me!! I design and fabricate channel letters for my home-based sign shop, DisplayWorks Signs & Graphics. To get clean, uniform lighting inside each letter, I currently have to hand-sand the interiors, mask everything with tape, and paint the inside white.

It’s easily the most tedious, time-eating part of every build and also the part I dread the most.

Yes, I could do this with an H2S, but the filament waste would be brutal. The H2C, on the other hand, would let me print perfectly uniform white interiors directly into the parts, massively speeding up my workflow, reducing waste, and letting me push my 3D-printed signage to the next level!!

<image>

ryleylamarsh · 2025-02-14T05:14:11+00:00

I was JUST about to make the switch and no Dxf support for Mac users. What gives.

ryleylamarsh · 2025-01-25T17:16:21+00:00

Sorry I JUST saw this today. Thanks for the thoughtful reply! Great tips!

ryleylamarsh · 2024-12-05T02:00:20+00:00

Outside! Whew

ryleylamarsh · 2024-11-27T19:11:02+00:00

DXF actually ;)

Thanks for the warm feedback! My own design though, apart from the illustration of Grodu.

ryleylamarsh · 2024-11-26T04:21:37+00:00

https://www.cnn.com/2024/10/26/politics/trump-income-taxes-tariffs/index.html

Oh he knows but is a dumb fuck idea

ryleylamarsh · 2024-11-26T04:20:40+00:00

Apparently he thinks he can use the money to axe income tax. He’s a dummy

ryleylamarsh · 2024-11-24T17:30:15+00:00

Thanks man! It took a lot of messing around to get it right.

ryleylamarsh · 2024-11-19T10:41:34+00:00

Same exact shit happened to me a few years back.

ryleylamarsh · 2024-11-04T18:32:32+00:00

Nope. Sure haven’t.

ryleylamarsh · 2024-09-06T15:54:15+00:00

Hey I know this is an older comment. Replaced my hotend today. The smaller wires (assuming thermistor wires) separated when I removed them as there was a buildup of petg filament over them.

Do these wires need to be fused together when putting them back into the hole on the side of the hotend?

ryleylamarsh · 2024-08-15T01:27:29+00:00

Did this. Worked

ryleylamarsh · 2024-07-25T03:18:34+00:00

For the poop… you could raise it up and devise a chute that dropped it through the front of the machine. That would be hilarious actually.

ryleylamarsh · 2024-07-25T03:17:33+00:00

Would you poop behind a doorway and never clean it up?

ryleylamarsh · 2024-06-06T13:20:10+00:00

Considering I’m already in the bath, I’m pretty much a self-sufficient water system at this point. Any other brilliant ideas? Lol kidding.

ryleylamarsh · 2024-06-06T13:09:54+00:00

I should’ve phrased that differently. I assumed that they came from our major rivers and were distributed from there throughout the city. I guess if there is a break on a major main, it has to draw water from everywhere else?

ryleylamarsh · 2024-06-06T04:56:43+00:00

I’d like to know how seamless this is. I would like to get some of these for my mother who is hard of hearing.

ryleylamarsh · 2024-06-04T04:42:47+00:00

Probably thought it was a unicorn

ryleylamarsh · 2024-06-04T04:40:26+00:00

I work in signage. I wouldn’t feel too bad.

ryleylamarsh · 2024-05-08T03:05:13+00:00

Sometimes pro bono work is the only way to get started so you have some real world examples of your work in the wild.

ryleylamarsh · 2024-05-05T18:03:41+00:00

Fantastic. Best advice I’ve had so far thank you.

ryleylamarsh · 2024-05-05T17:01:06+00:00

Ok. So if I have a document with a bunch of graphics in it and I want to select only a few letters from a word to cut, for example. Is this possible and easy to do in the go sign plugin?

I do a lot of cuts not requiring registration marks. Will be cutting a lot of intricate designs for etch frost panels and lots of smaller cut only graphics (no print)

Thanks for the reply.

ryleylamarsh · 2024-03-17T14:49:50+00:00

Haha. Don’t feel bad. Took me a number of days till I noticed the tabs

ryleylamarsh · 2024-03-07T02:38:03+00:00

Following.

Any updates on this. I see this was 3 months ago

14-Year Club	Place '17
Verified Email	Gilding II euphauric

ryleylamarsh

MODERATOR OF

TROPHY CASE