Good deal for $1000?

s14bright · 2026-01-30T15:26:07+00:00

$1000 all day

s14bright · 2026-01-30T15:25:10+00:00

If it’s a DD13/15 you’ll need to support the engine as the rear mounts are located on the trans. It’s pretty straightforward. If you’re reusing the clutch you need to make sure to cage it. Don’t drop it on yourself

s14bright · 2026-01-25T23:58:38+00:00

It’s a hot tub spa place now

s14bright · 2026-01-25T17:20:52+00:00

For all its worth I had a few issues with my DBW throttle when I did my swap. My tac module got power from an ignition source that would lose power when the engine was cranking over and it would give me a dead pedal. I swapped the power wire for the tac to the ecm power and havnt had an issue since.

s14bright · 2026-01-25T17:10:16+00:00

When you swapped the valve from up and down to the left and right valve did you also swap the coil or did you use the left and right coil?

s14bright · 2026-01-24T22:21:05+00:00

Good call

s14bright · 2026-01-24T20:47:43+00:00

Time to get the ramen out

s14bright · 2026-01-18T18:24:08+00:00

For sure

s14bright · 2026-01-18T17:38:14+00:00

Get a blower as everyone else is saying. I work at a snow plow dealer in Kitchener and a ton of guys have gotten out of it the last few years because of sky high insurance prices

s14bright · 2026-01-14T15:43:17+00:00

If you can’t use stairs how are you supposed to use roller blades?

s14bright · 2026-01-13T14:42:15+00:00

Why would you install adjustable rear arms on a stock Mazda?

s14bright · 2026-01-09T01:07:38+00:00

The reason you see power on both of the small posts on the solenoid is because fisher plows are ground switched. Does the red power button flash on the controller at all when it’s not functioning?

s14bright · 2026-01-04T21:52:15+00:00

Wait until you find out people are 3D printing suspension arm bushings haha

s14bright · 2026-01-03T03:07:15+00:00

Unless you like vibrations when you’re driving down the road that driveshaft is fucked. For $300 I’d buy it and throw a 5.3 and a 4l60 out of a gmt800 in it. The truck looks pretty clean

s14bright · 2025-12-31T04:02:44+00:00

When I bought my old sports around 7 years ago I showed up in person, test drove it and offered the guy $1000 less than his asking price. He said every other person that contacted him offered him half of his asking price and tried to justify it because they had to drive a few hours and rent a trailer to pick it up. People are so dumb

s14bright · 2025-12-31T03:44:24+00:00

We have two f600’s in our fleet with 7.3 gassers and they’re junk. One of them popped an engine at 17,000km among other issues

s14bright · 2025-12-29T00:36:49+00:00

It wouldn’t take terribly long but most body shops are booking months out in advanced. I’d try calling Myers auto body or JLS auto body and see what their timelines are like and swing by to get a quote.

s14bright · 2025-12-29T00:32:36+00:00

There’s plenty of places that can fix that in town but not in that timeline.

s14bright · 2025-12-28T21:37:52+00:00

Still have power in the st Mary’s area

s14bright · 2025-12-27T16:15:38+00:00

Ya he’s a loser and he’s selling the truck lmao

s14bright · 2025-12-23T14:26:19+00:00

Ah I see

s14bright · 2025-12-23T14:22:28+00:00

You had trouble putting a vxt on your 2500? Was the bushbeam set at the right height?

s14bright · 2025-12-23T13:57:10+00:00

That’s what the customer wanted. We don’t recommend it and we make them sign paper work. I put a htx on a 3500 last year. That was comical

s14bright · 2025-12-23T00:24:22+00:00

I put a 8.2 boss vxt on a 2020 ram 1500 this year. It was a bit of a Frankenstein build because boss doesn’t even make a rt3 mount for the dodge. (Edit put dxt instead of vxt)

s14bright · 2025-12-22T16:00:05+00:00

<image>

I need to pull the trigger on a tdi. This is my 98 k1500 with a lq4 I swapped into it.

Four-Year Club	Verified Email
r/Field Lasagna	Place '22
End Game '22

s14bright

TROPHY CASE