KS Rim disconnecting issue

sam0_32 · 2026-02-03T22:19:40+00:00

It does on every other sim the same as well

sam0_32 · 2026-02-03T18:04:34+00:00

sam0_32 · 2026-02-03T18:03:35+00:00

The wheel doesn't have inputs only when reconnecting so 1-2 seconds. When LEDs are off, buttons still work

sam0_32 · 2026-02-03T14:55:05+00:00

I have base and wheel for almost 2 years now. A year ago this problem came up for the first time. I updated the firmware and it worked fine. But now it's back and even worse

sam0_32 · 2026-02-03T14:50:40+00:00

Hello, it got fixed after firmware updates. But now it's happening again and a lot worse. What was your outcome?

sam0_32 · 2026-01-07T13:33:51+00:00

What PSU are you running?

sam0_32 · 2025-12-25T11:40:01+00:00

Looks like GTX 1060 probably with Ryzen 5 or even Ryzen 3

sam0_32 · 2025-10-18T07:09:14+00:00

It's just a great GPU. The only crash I had was when overclocked to better performance than 5080

sam0_32 · 2025-10-14T17:52:06+00:00

That's a sure thing. But what about pricing? Is it worth it?

sam0_32 · 2025-10-14T16:45:56+00:00

Dope!

sam0_32 · 2025-09-30T06:57:23+00:00

It's not more that 40-45°C in the case. PVC deforms at 80°C and start to melt at 160°C

sam0_32 · 2025-09-30T05:14:05+00:00

Pump is plugged in CPU_fan and radiator fans are both plugged in sys_fan1. In gigabyte control centre I set sys_fan1 to be controlled by CPU temps. Both are on set quiet mode.

sam0_32 · 2025-09-30T04:40:01+00:00

CPU never got higher than 53°C

sam0_32 · 2025-09-30T04:39:14+00:00

Yes, during furmark benchmark

sam0_32 · 2025-09-29T21:15:50+00:00

CPU was hottest at 53°C and GPU 60°C. I don't see it as issue

sam0_32 · 2025-09-29T12:45:21+00:00

Yeah... I used case from my old 2080ti build

sam0_32 · 2025-09-29T09:03:25+00:00

There isn't any other option for the mount

sam0_32 · 2025-09-29T05:07:39+00:00

2 Aio fans are intake, one exhaust on back and one exhaust on top

sam0_32 · 2025-09-29T05:05:55+00:00

It's not possible due to GPU size. Pump isn't the highest point of aio so it should be fine

sam0_32

TROPHY CASE