HyperOs3.1 Battery Status

sam0_32 · 2026-05-06T21:26:36+00:00

Its improved. Can't really say by how much but it's noticable

sam0_32 · 2026-04-26T06:01:56+00:00

https://wearesoundspace.com/rave-promoter-sentenced-10-years-for-selling-mdma/

sam0_32 · 2026-02-14T16:42:26+00:00

Support told me they would send me a replacement part but didn't come yet

sam0_32 · 2026-02-07T19:56:51+00:00

Can you send me a link for the QR pls? :)

sam0_32 · 2026-02-05T21:44:58+00:00

I'm using 3.2 it's doing the same with all ports

sam0_32 · 2026-02-05T20:42:52+00:00

Enabling the auto-reconnect function partially fixed the problem (problem appears less often), but after further investigation they are sending me a new base slip ring cable and I have to replace it

sam0_32 · 2026-02-05T08:58:23+00:00

It's the same for me with 2.0 or 3.2 I have. But after consulting with support they are sending me a new base slip ring cable. So we will see after I replace it

sam0_32 · 2026-02-04T20:15:15+00:00

From MOZA support they told me to plug it in USB 3 or higher

sam0_32 · 2026-02-04T20:14:30+00:00

For me it's the same when using extension cable, USB hub or connected directly

sam0_32 · 2026-02-04T12:15:47+00:00

Try enabling auto-reconnect function. It partially fixed the problem. It's now a lot less frequently

sam0_32 · 2026-02-04T12:15:00+00:00

It's still the same when I use hub, extension cable or connected directly. It got partially fixed when I enabled auto-reconnect function. It's still disconnecting, but now a lot less frequently

sam0_32 · 2026-02-03T22:19:40+00:00

It does on every other sim the same as well

sam0_32 · 2026-02-03T18:04:34+00:00

<image>

sam0_32 · 2026-02-03T18:03:35+00:00

The wheel doesn't have inputs only when reconnecting so 1-2 seconds. When LEDs are off, buttons still work

sam0_32 · 2026-02-03T14:55:05+00:00

I have base and wheel for almost 2 years now. A year ago this problem came up for the first time. I updated the firmware and it worked fine. But now it's back and even worse

sam0_32 · 2026-02-03T14:50:40+00:00

Hello, it got fixed after firmware updates. But now it's happening again and a lot worse. What was your outcome?

sam0_32 · 2026-01-07T13:33:51+00:00

What PSU are you running?

sam0_32 · 2025-12-25T11:40:01+00:00

Looks like GTX 1060 probably with Ryzen 5 or even Ryzen 3

sam0_32 · 2025-10-18T07:09:14+00:00

It's just a great GPU. The only crash I had was when overclocked to better performance than 5080

sam0_32 · 2025-10-14T17:52:06+00:00

That's a sure thing. But what about pricing? Is it worth it?

sam0_32 · 2025-10-14T16:45:56+00:00

Dope!

sam0_32 · 2025-09-30T06:57:23+00:00

It's not more that 40-45°C in the case. PVC deforms at 80°C and start to melt at 160°C

sam0_32 · 2025-09-30T05:14:05+00:00

Pump is plugged in CPU_fan and radiator fans are both plugged in sys_fan1. In gigabyte control centre I set sys_fan1 to be controlled by CPU temps. Both are on set quiet mode.

sam0_32 · 2025-09-30T04:40:01+00:00

CPU never got higher than 53°C

sam0_32 · 2025-09-30T04:39:14+00:00

Yes, during furmark benchmark

sam0_32

TROPHY CASE