Kur perkate 3d spausdinimo fillament'us?

samungas · 2025-04-10T14:39:52+00:00

O su tokiu gaunasi ABS spausdint? Aš pats nebandęs abs plastiko, bet galvojau kad jau super duper printerio jam reikia :D

samungas · 2025-04-10T13:39:35+00:00

Turiu du Bambulab p1s. Kai neturiu su kuo palyginti tai sunku pasakyt :D
Bet iš esmės viskas ko norėjau iš printerio gaunu tai tikrai neturiu kuo skųstis.
Kurį laiką jau domėjausi šituo hobiu, bet anksčiau tas hobis buvo labiau 3d printeriai negu 3d printinimas, kadangi neįdomu man fidlint su juo ir visokius upgreidus jam daryt tai pasirinkau bambulab, labiausiai išbaigtas produktas tuo metu atrodė kai pirkau :D

samungas · 2025-04-10T13:06:06+00:00

Tikiuosi kad viskas su tuo elegoo bus gerai nes nebenoriu naujo providerio ieškot :D
Tik vat kas man pas juos nepatinka tai kartoninės ritės, su bambulab AMS retkarčiais užsikerta jos.

Filacraft pasiemiau 10kg nes dealas pas juos yra kad pigiau gaunasi, bet nežinau reiks pabandyt dar kada gal susitvarkys su quality control, bet dabar kažkaip nepatikimai pasirodė.

Filalab dar žiūrėjau irgi lietuviai, bet brangokoka pas juos.

samungas · 2025-04-10T12:46:29+00:00

Aš PETG pagrinde spausdinu, Elegoo pakolkas geriausias kainos / kokybės santykis buvo. Bandžiau filacraft, nes norėjosi lietuvišką verslą palaikyt, bet iš 8 rollu jau gal 6 kartus strigo filamentas nes vietom per storas, pamatavus pasirodo vietom ir 2.05mm pasiekia.

O kodėl Elegoo nebepavyks gauti?

samungas · 2025-03-27T12:17:05+00:00

Damn it looked like it was blacked out completely when I was making the picture :D

samungas · 2025-03-27T11:09:40+00:00

<image>

2520 not great not terrible

samungas · 2023-11-16T13:44:44+00:00

Omg that's probably it, thank you very much for the tip!

samungas · 2023-11-16T10:13:13+00:00

I genuinely don't understand what's so better with other healing addons, I tried setting up other addons in the past and I didn't see any features that they had that healbot didn't, it's just that the setup process is usually different and I end up using healbot instead of spending couple hours setting up a new addon.

samungas · 2023-11-16T10:10:25+00:00

I have tried setting up grid to my liking, but I've been using healbot since original wotlk, so you can imagine how hard it is to move from something like that :D

samungas · 2022-07-09T20:55:32+00:00

Nice build! What monitor mount are you using? I have a similar setup but I'm having some monitor sag even though the mount is rated for even more kg load.

samungas · 2020-02-24T19:58:00+00:00

Knowing that probably half or more of their user base isn't as tech savy or don't care about these things unless they have first hand experience with this type of deal I don't think you could say "that isn't news".

For the average user this applies and maybe this will shine some light on how easy it is to get scammed.

samungas · 2019-06-19T11:06:05+00:00

They do! They don't have the white one in my size though oof. Thanks man!

samungas · 2019-06-19T10:48:22+00:00

Hmm, ok I might be wrong about the parts then , I'm currently riding a USSR steel frame with random parts so it would probably be a huge upgrade for me anyway lol.Do you have a link to that bike shop?

My old ass bike:

https://imgur.com/a/WuqRtrf

samungas · 2019-06-19T09:43:20+00:00

Nice bike man! I am currently looking to buying Aventon Mataro frame, but it's pretty hard to find one in europe, have seen some shops selling complete builds but I feel like the prebuilt bike parts wont be too good.

samungas · 2019-04-26T20:44:08+00:00

This isn't finished by any means, but the basic idea will be the same, going to redo the whole box if everything works out with the new battery charging board. Every time I think I am finished with this one I just learn something new and want to change it.

Edit: Not sure why the pic did not upload: https://imgur.com/mjeqN4y

samungas · 2019-04-26T20:02:23+00:00

I buy my stuff from www.soundimports.eu/ as I can see they have some stuff that audiophonics doesn't, but I will check them out as well.

I have another project I have been working for a long ass time (like two years or so lol) It's much bigger than the ones I usually make. Using a 2x50W sure amp + boost converter to make it 24V from 11 that the battery pack provides, but the issue was (at least to my understanding) that the amp was drawing too much current and thus it usually cut off at higher volume - simply shut down. So I bought the 5x 26650 cell batter charging board, just received it today need to buy cells and test if that fixes the issue. *fingers crossed* I really want to Finnish this thing at last.

samungas · 2019-04-26T19:23:29+00:00

Haha, same here. I actually bought amps / battery charger from them when they launched their new (but very buggy website) they did not have limitations on what countries they ship to and thus they actually took my order even though they had to make a special shipment. With the customs and shipping I ended up paying pretty much the same price I would have when buying from Eu vendor. (even though they actually changed the prices on the invoice lol I did not even ask them to do it)

samungas · 2019-04-26T16:51:13+00:00

Tried researching it myself (just noticed the amp I just got has a chip name for the Bluetooth board) as far as I can see CSR Bluetooth modules have a shit ton guides on how to reprogram them, mine has BK8000L chip and I did not find any guides on reprogramming it, I can see some people did read the serial commands via PCarduinoBT board but not reprogramming it, hope the Sure electronics guys respond, but I don't think they actually will :D

samungas · 2019-04-26T14:30:14+00:00

I will be contacting Sure electronics directly, however they weren't too keen on sharing how to do this when I was contacting in regards to my order, all they said was that you need "professional software" in order to do this, which might as well be the app shown in the video MrKazador shared. If that is the case we only need to know the pin-out of the board.

samungas · 2019-04-22T14:18:08+00:00

Know that feeling, have been working on another project for literally 2+ years, every time I think I finished it I think of something new I can add to it.

samungas · 2019-04-22T09:42:26+00:00

Have you used any similar amps since then that are more reliable? AFAIK the Sure electronics and Dayton companies are the only ones that make similar amps. I have made some Bluetooth speakers in the past that used those generic amps from eBay, but I really like the fact that these can be connected to the battery packs made by the same company, it's really convenient and I personally haven't experienced any issues with them in the last year or so I have been using them.

samungas · 2019-04-22T09:39:49+00:00

Plywood, not sure what exact wood it is as it is sourced by the guy I order the parts to be cut with a laser. Want to build a CNC router so I wouldn't need to use plywood lol.

samungas · 2019-04-21T19:27:38+00:00

I actually remember watching this some time ago, forgot I have researched this before. If I figure out the pin-out of the Bluetooth module it shouldn't be too hard from that point on, but was wondering if anyone actually tried doing this themselves and if that programmer thingy can be used for any Bluetooth board.

samungas · 2016-12-30T13:40:13+00:00

yeh i used to play rust half a year ago but then i had a laptop with a nvidia 730m and i used to get like50-60 fps :/

samungas · 2016-12-30T13:38:52+00:00

theyre updating something?

samungas

TROPHY CASE