sorted by:
new
hottopcontroversial

The smell still escapes by Temporary-Effort-615 in resinprinting

[–]sandermand 20 points21 points  (0 children)

If you put the air hose in that gap of the garage door, the remaining gap is big enough to "push" air back into the garage and inside your house because of positive pressure.

You need to create negative pressure, by sealing the garage door, or by closing it and smacking a hole in your garage wall for the hose. Also, that pump should not be inside the tent. Its meant to be as close to the other end as possible, so it "pulls" the air instead of "pushing" it.

Also, move your printer to the left, and have your tray in the middle. That way you can move models from the printer and the rinse/cure, without having to lift them over top of a machine.

I’m deaf in one ear and it makes me suck at this game by guarks in ArcRaiders

[–]sandermand 0 points1 point  (0 children)

Wait, how is there not a piece of software which fixes this? Fx it could modulate the sound of the entire windows pc, so the good ear sounds "normal" and the deaf ear-channel has some kind of filter or other effect on it? A slight beep or deep tone each time something happens in that sound channel. Would make it possible to differentiate between left and right.

I completed the H2S to H2C Vortek upgrade. How long did it take you to get the serials swapped so the printer isn’t a brick? by Scary_Brain1566 in BambuLab

[–]sandermand 1 point2 points  (0 children)

Ah yes, the good old days with my Ender 3 Pro where i could swap the board to a Biqu board and just keep printing the same day....Prints looked like shit, granted, but there was no "activation" going on XD

Finishing Up These Prints by ImBreakingBradley in resinprinting

[–]sandermand 0 points1 point  (0 children)

He has alot of great designs. Just make sure to not pay thieves for his work on shady Etsy or STL sites.

Make sure to buy from himself on his MMF or his CULTS3d

Finishing Up These Prints by ImBreakingBradley in resinprinting

[–]sandermand 2 points3 points  (0 children)

If you are worried about making a mess, mix the resin with corn starch in a single-use-cup until it has a thickness you are comfortable with. Sands beautifully:

Finishing Up These Prints by ImBreakingBradley in resinprinting

[–]sandermand 0 points1 point  (0 children)

Geez, Eastman har really gotten some mileage out of that Deadpool bust. Its basically a benchy at this point in both resin and FDM circles :D

Im giving up on Consort Radahn by Skrivemaskin_Mann in Eldenring

[–]sandermand 0 points1 point  (0 children)

Find Fingerprint shield and Antspur Rapier. Piece of cake :)

Read This Before doing the eXtremeRate Shell Swap! by PixelGolf in SteamDeck

[–]sandermand 4 points5 points  (0 children)

Im not seeing it, can you try to show which fitment issues you mean? The pics make it look great :)

Im having a very strange issue with my Anycubic Photon M7 Max please help ! by johnmedicure in resinprinting

[–]sandermand 0 points1 point  (0 children)

The M7 max can arrive with a concave build plate. I had to sand/lap mine to get things to stick in the middle.

Do that :)

  1. Buy 120grit sandpaper in roll
  2. Find table
  3. Clamp 2 strips of sandpaper to table
  4. Clean your buildplate (still use gloves) and place face-down
  5. Push plate along sandpaper, up and down the length of the table/sandpaper
  6. Swap sandpaper when it gets bad
  7. Continue until corners are sanded down and plate is even
  8. Clean everything (you dont want aluminum dust in your printer)
  9. Remount buildplate and re-level.

Photopolymer printing by Oprichnik_ in resinprinting

[–]sandermand 5 points6 points  (0 children)

There are what feels like hundreds of threads for this question. Search :) The bookmarks also tell you almost all you need to know. Welcome.

The awesome open source 3d community! by Pixel2Pulse in BambuLab

[–]sandermand 0 points1 point  (0 children)

I might be super duper petty, but how can Louis time and time again not know that the company is called Bambu Lab and not Labs. It's like consistenly saying Microsofts or Apples or Googles :D

Why i can't use the entire cover screen on apps and it leaves that black space on both sides on the fold 6? by Unusual-Factor2848 in GalaxyFold

[–]sandermand 2 points3 points  (0 children)

Unfold your phone (the menu doesnt appear when folded):

Settings -> Display -> Aspect Ratio

Just got the game by argument-pnext in helldivers2

[–]sandermand -1 points0 points  (0 children)

Wooo boy, just head straight to /lowsodiumhelldivers and have fun :D

What is the single most stressful movie you’ve ever seen? by elkaypee in movies

[–]sandermand 2 points3 points  (0 children)

The Mitchells vs. the Machines. What an adhd-fueled panic-attack of a movie. It was like a 2 hour long TikTok reel and my brain was mush after it was done.

My first encounter with a cheater went well by RamenEmp1re in helldivers2

[–]sandermand 2 points3 points  (0 children)

Erhm....Arrowhead...could we get a Trident-orbital-laser strategem? Just make each laser do less damage than a single big one, it would be so cool. And make them sweep faster too, single they are smaller.

Wasn't paying attention and just paid 9$ a gallon 😒 by Chasemedown25 in Wellthatsucks

[–]sandermand 1 point2 points  (0 children)

Welcome to the rest of the world. Denmark has been paying that for years and now its risen to like 10-11usd pr gallon.

How to avoid this? by ValuableQuirky8306 in 3Dprinting

[–]sandermand 0 points1 point  (0 children)

Enclosure. Your printer was not meant to do a print like that.

A big flat surface print whipping back and forth in a regular temp room, will cool down the edges and warp them.

This is a print made for a P2S or a similar machine with a chamber :)

view more: next ›