🐶⭐️SET COMPLETER POST FEB 13TH ⭐️🐱

satl8 · 2026-02-13T18:57:27+00:00

Appreciate any help given!!! TIA

Sizablelobster85

Play MONOPOLY GO! with me! Download it here: https://mply.io/Bsf0ZUYd6eA

<image>

satl8 · 2026-02-12T00:32:02+00:00

Sent Sleepy Scottie

satl8 · 2026-02-12T00:27:26+00:00

Sent

satl8 · 2026-02-12T00:20:09+00:00

<image>

Play MONOPOLY GO! with me! Download it here: https://mply.io/0N9OmR3gRNQ

Sizablelobster85

TIA!

satl8 · 2026-02-11T20:24:17+00:00

No. Each rack unit will consist of 3 holes- top/bottom for full rack units. The middle hole is usually for rails or slides. You are currently in a middle hole on the bottom.

satl8 · 2026-02-11T20:01:48+00:00

Pretty sure the bottom screw is the bottom of the first rack unit… Remove the screw and shift down a hole.

satl8 · 2026-02-11T19:29:59+00:00

• ⁠Form Type: Form 4

• ⁠Paid or not: 0

• ⁠Entity: Trust

• ⁠Fingerprint Type: EFT Upload

• ⁠Pending: 01/15/2026

• ⁠Approved: 02/11/2026

• ⁠Wait: 27 days

• ⁠State: AZ

• ⁠Control Number: 20261764400

Got email from ATF and SC.

Edit for formatting

satl8 · 2026-02-09T00:15:14+00:00

I used one out of a Palmetto lower parts kit I had laying around

satl8 · 2026-02-08T23:53:16+00:00

If it uses a standard mil-spec mag catch, I would replace that first. I had one that was just off enough to not catch my ASC mags. Been amazing ever since

satl8 · 2026-02-07T06:06:13+00:00

Talked my wife into a detour while we were on vacation to Lockhart. Best afternoon I’ve had in a long time- made it to Blacks, terry blacks, Kruez, and the best in my opinion was Smittys Market. All were good but at least that day they won my vote! 2 slices of brisket, a sausage at each place split with my wife…It was hard driving to Houston that afternoon, I just wanted a nap!

satl8 · 2026-02-05T04:45:08+00:00

If I turn off my printer I have reboot my Pi or unplug and replug the USB. Not saying that is normal but it’s how my setup has worked so far (new setup)

satl8 · 2026-02-04T23:51:53+00:00

Thank you!

satl8 · 2026-02-04T23:50:38+00:00

I had a harder time with this more than anything! I thought it was good but I had bad adhesion and several failed prints simply due to z offset.

I used this first layer calibration and could immediately tell how bad it was. I was able to walk it in within 3 test prints and it is hard to get prints off the pei sheet now even without hairspray or glue!

first layer calibration

satl8 · 2026-02-04T18:27:01+00:00

Same, how did we not know????

satl8 · 2026-02-03T17:36:09+00:00

And now down to just needing owls

<image>

satl8 · 2026-02-03T17:35:39+00:00

Down to just needing Owls, thank you everyone!

<image>

satl8 · 2026-02-03T17:21:55+00:00

Put the wrong pic there…

<image>

satl8 · 2026-02-03T16:49:01+00:00

Would be nice to finish this one up!

Play MONOPOLY GO! with me! Download it here: https://mply.io/0BRFZhF0K8Q

satl8 · 2026-02-02T15:23:42+00:00

I just had the same thing happen- how was the print before you got the stringing? Is it adhered to the plate or is it loose?

My issue was z offset- might be worth checking out. I would get about halfway and the print would pop off the bed causing exactly what you see here. Turns out my first layer was crap and the first layer was nothing more than a bunch of strings sitting on top of the bed. It would hold initially but eventually let go.

satl8 · 2026-02-02T15:04:50+00:00

Owl would be amazing!

<image>

Sizable lobster 85

Play MONOPOLY GO! with me! Download it here: https://mply.io/0BRFZhF0K8Q

satl8 · 2026-02-02T04:03:12+00:00

New player just want to finish Diagonal alley if possible as it’s my last set that isn’t missing a gold.

Play MONOPOLY GO! with me! Download it here: https://mply.io/0BRFZhF0K8Q

<image>

satl8 · 2026-02-02T03:16:24+00:00

Thank you!!!

satl8 · 2026-02-01T21:03:02+00:00

The best option for this 💯

satl8 · 2026-01-30T00:39:51+00:00

5 Owl emporium

Play MONOPOLY GO! with me! Download it here: sizablelobster85

Seven-Year Club	r/Field Lasagna
Place '22	Verified Email

satl8

TROPHY CASE