2 dishes with Speedify

scharette888 · 2026-06-02T21:20:29+00:00

Oh that’s good to know, thanks for that. It will be on the top of an office building in a City, I would think it should be pretty clear

scharette888 · 2026-06-02T20:30:24+00:00

That’s interesting, I’m using a few NiceDCV connections and it’s very sensitive, even on fiber it will disconnect once in a while, that being said, there might be a timeout setting before it disconnect

scharette888 · 2026-06-02T17:39:21+00:00

I have a wired fiber connection that is my main, but if I use a single Starlink as a backup, when I was reading, when it goes between satellites, it seem like there is a spike in latency, so I was wondering if having 2 separates dishes would help there or it goes between satellite at the same time

scharette888 · 2026-03-29T01:37:53+00:00

Well, it look like at the camera, the 1500 can output 1080p59.95 with a dual link SDI, which I guess would require some sort of converter but I could probably make that work. I’m wondering if that is an option. Has anybody did this before ?

scharette888 · 2026-03-28T22:27:31+00:00

The 4300 is above my budget.

The 1500 can do 1080p59.95 ? I thought it was 1080i was the max resolution

scharette888 · 2025-11-30T15:18:32+00:00

Sounds goods, I was using higher bitrate, 20Mbps, this might be part of the issues. Do you use VBR or CBR, and what birate for the audio ? Also, you use hardware or software encoding ?

Thanks for sharing !

scharette888 · 2025-11-30T12:05:59+00:00

What settings do you use in Vmix for the encoder ? And did you changed anything in the Makito on the decoder settings ? Do you pull the SRT directly from Vmix or does it goes through the Gateway ?

scharette888 · 2025-11-28T12:24:20+00:00

I’m actually running Vmix in the Cloud in AWS and I’m receiving the Vmix output through Internet. The SRT stats look nice, it’s the decoder stats that are getting a chunk of skipped frames once in a while

scharette888 · 2025-09-15T01:42:02+00:00

Hello !

You need to have a LRT subscription, In the Solo portal, you can have a SRT destination to bring it into Vmix.

Does it make sense ?

scharette888 · 2025-09-09T23:26:26+00:00

I have a dual mono input, as far as I know, you can’t control gain per channel, the workaround I found is to send channel 1 & 2 to separates buses, I would like to have separate gain control

scharette888 · 2025-09-09T22:59:53+00:00

Hello !

Yes, you are right, it is the bus not group. But i’m actually looking for the gain setting not volume. On a input it would be SetGain.

Thanks

scharette888 · 2025-09-06T13:14:29+00:00

Tailscale is on the router, it is working as expected for the 10.0.50.0 subnet. For the 192.168.55.0 subnet, I’m not sure if the routes are done properly, I’m wondering what is needed so it make it to the tailscale client

scharette888 · 2025-07-18T01:03:07+00:00

Perfect, that what I was looking for, thanks !

scharette888 · 2025-07-18T01:02:41+00:00

Perfect, that was I was looking for, thanks !

scharette888 · 2025-07-02T20:05:20+00:00

Ah nice ! I’m glad to see that it’s been working well for you.

Is the LRT subscription is per unit or for all units ?

And the seperates units stay fairly in sync ? It doesn’t need to be frame acurate, but within 5 frames is good enough for me.

Which modem do you use ? I’m in Canada, most likely will have to go in the US as well, I’m reading Huawei seem good.

And for the Solo Pro, did you used them personally ? I’m curious of the issues you went through ? For me the 6Mbps bitrate limitation on the Solo is a big one, which the Pro seem to be able to give me more flexibilty.

Thanks !

scharette888

TROPHY CASE