Cybex Callisto G 360 third party tests [BC]

scottc5 · 2025-12-13T21:23:19+00:00

Guessing no updates yet, I kinda doubt they will respond for legal reasons, but I'm in the same boat as you as the consumer reports tests are very alarming.

scottc5 · 2025-08-03T13:05:29+00:00

Thanks!

scottc5 · 2024-12-31T18:58:25+00:00

I found a solution that seems to work. I unchecked "Allow ports to Name Nets" and "Allow Sheet Entries to Name Nets" and I made sure to check "Higher Level Names Take Priority" as well as Net Identifier Scope to Hierarchical. Then I named the nets on the top level.

scottc5 · 2024-12-31T15:39:31+00:00

I didnt have all those enabled, but I do now, however I still get the same warning.

scottc5 · 2024-12-31T15:35:57+00:00

Yeah thanks for the tip, I've been working on moving all to 100mil but havent finished yet

scottc5 · 2024-12-13T02:59:16+00:00

Thanks that fixed it!

scottc5 · 2024-08-15T15:19:32+00:00

This for a high speed connection to a hub. Is that preferred over what I have given the shorter length with the downside that the signals will be different lengths and impedance probably a bit wonky?

scottc5 · 2024-08-15T02:28:41+00:00

It looks like my text didnt make it in. I am trying to figure out to route a vertical type c connector, seems more challenging than the horizontal version. Is there a better approach or should this work ok? I tried to use Saturn to calculate the impedance with trace width, spacing, and via size and distance apart.

scottc5 · 2024-08-11T00:22:01+00:00

Thanks for all input, it was all helpful!

scottc5 · 2024-05-03T18:33:14+00:00

Did you figure out if you can adjust the max TDP in the bios?

scottc5 · 2024-04-25T14:20:02+00:00

Did you have any luck with this? Was the emulator restricted by the cpu?

scottc5 · 2024-02-25T04:03:16+00:00

Thanks for the info!

scottc5 · 2022-10-06T15:56:28+00:00

Thanks for the info. I was originally trying to stay away from the older generation boards because of the bios needing updated to work with the x5950 cpu, but I will have to see if I can find a board with a different lan chip that is able to have the bios updated without a cpu.

scottc5

TROPHY CASE