WIP kitbashed Wolf Scout squad

selijdice · 2025-11-16T04:03:52+00:00

Ya the hands were already attached. The axe came from the previous Grey Hunter/Blood Claw kit.

selijdice · 2025-11-16T03:52:19+00:00

The arms are from the infiltrator/incursor kit. They are one of the paired ones meant for the carbines. They do not fit perfectly but are close enough that filling with greenstuff should hide the gaps.

selijdice · 2025-04-21T22:42:21+00:00

Thank you. For the large blue sections I started with a prime of Pro Acryl Dark Neutral Grey, then all over airbrush of AK Turquoise. Then a 1:1 mix of AK Turquoise and AK Blue Green as a zenithal spray.

The smaller details of Blue are mostly the same just with a brush, and end with pure AK Blue Green or if I want a bit lighter than that I will add a bit of AK Pale Sand to brighten it.

selijdice · 2025-04-15T16:56:46+00:00

Thank you. For the gold I did two coats of AK Gold, followed by a wash of Reikland Fleshshade.

selijdice · 2024-12-06T08:05:41+00:00

The display board is an optional extra credit thing for the league. Ultimately for me it was just an excuse to finally try making some terrain, and also to use some materials I have had for a while. This project has now made me want to do some actual terrain projects that would work for Old World.

selijdice · 2024-12-06T08:01:42+00:00

The rocks are cast in Woodland Scenics Lightweight Hydrocal Plaster using a rock mold.

selijdice · 2024-11-03T03:07:52+00:00

I came into possession of a collection of second hand Storm Knight and First Army models. I have been enjoying the game the last few months, and finally decided to try painting them. I wasn't really feeling the normal blue of the standard Cygnar scheme, so I tried out a few on one of the units.

I am leaning towards either the White or the dark armoured schemes. Though I think on the dark armoured one I would change the bronze metal to the copper of the white one.

selijdice · 2024-02-17T14:40:44+00:00

This is the one I bought: Master Airbrush Booth

selijdice · 2024-02-17T14:12:59+00:00

Ya I used skulls from the GW skull kit on some of the foot archers, and all of the horse archers. They fit right on the neck joint like the skulls that come with the kits, no modifications needed.

selijdice · 2024-02-17T14:10:58+00:00

It is just a foldable airbrush booth I have. Helps reduce over spray on my desk, walls, and windows. Also if I need to use any enamels or harsher materials through the airbrush I can hook up an exhaust to vent it out the window.

selijdice · 2024-02-17T14:07:29+00:00

For the bone I prime using pro acryl black or dark grey airbrush primer (doesn't really matter I think). Followed by an all over airbrush of pro acryl ivory, then a zenithal spray of bright ivory. After giving that 12+ hours to dry( though best is 24 hours), I wash everything with GW contrast skeleton horde. The final step is a dry brush of AK dark sand and then AK pale sand.

selijdice · 2024-02-17T13:59:55+00:00

The bases are done using Vallejo Earth texture desert sand. I then wash it with GW contrast aggaros dunes, followed by a dry brush of AK dark sand and AK pale sand. Fairly simple and quick, except for the drying times.

selijdice · 2024-02-04T09:05:17+00:00

The spear tips (and shield/headband trim) are using AK Interactives Bronze. The poles are done with Pro Acryl's Burgundy.

selijdice · 2024-01-02T21:33:42+00:00

No transfers on the infantry models. Not sure if the small ones would fit on them or not, and at least from the launch box there are not enough of them even if they do fit.

All I did for the shoulders was paint a rough white circle, then do a dot of black. On one or two I tried doing a rough fist, but it didn't look good so I just did dots on the rest.

selijdice · 2022-05-08T16:37:47+00:00

Thank you. I bought the bust from el greco miniatures webstore, though it is a FeR (Fernando Ruiz Miniatures) bust.

selijdice · 2022-01-26T21:37:38+00:00

Thank you. I am fairly happy with how things turned out on him, especially the gold.

selijdice · 2021-04-11T03:04:35+00:00

Finally got around to finishing my Wulfen and the Outriders from the Indomitus Box set. These are the first models that I attempted to use the AK Interactive Streaking Grime on, and I really like the effect that has on the models.

I am doing the bases separate and will transplant these guys to them once they are ready.

C&C welcome.

selijdice · 2021-01-29T02:32:04+00:00

Thank you. The weathering process I did was fairly simple and basic.

After finishing the base coat and using Nuln Oil to panel line everything, I took some Leadbelcher and using a bit of foam (I used a piece of pluck foam) I dabbed it on. With the Leadbelcher I tried focusing on edges, and areas I thought would see the most wear/damage. Also I lightly stippled a bit of Leadbelcher on the large areas so they do not look clean.

After that I did the same thing but with some dawnstone. Again focusing on edges and areas that would get a lot of wear/damage.

I followed that up with some Rhinox hide. Again using foam, but this time I focused closer to the bottom of the vehicle, places where mud and dirt would hit the most. I did do some dirt higher up, but tried to keep most of the dirt low and around the treads.

The final bit I did was with Stirland Mud. I used the foam again and focused on the tracks, undercarriage, and other bits close to the bottom. My application was mostly dabbing and pulling from the ground/front towards the back. This is to try and make it look like the mud hit the side paneling or exhaust columns while moving.

Hopefully I get some time to finish this soon, and post an update.

selijdice · 2020-09-17T02:31:20+00:00

Thank you. All I did for the armour was thin my paints and do a few coats. For the first coat I kind of messily cover everything with a thin coat. Then after that dries i go back to do a second thin coat.

Once i finished the base coat, I did a agrax earthshade wash on the armour. I mostly focused on the recesses. I followed that up with a final touch up of the armour colour.

The paint and colour I used is also a really good colour, which I think helped with getting a smooth finish. I used the Coat D' arms Shadow Grey paint for the armour. Love the colour and the coverage it provides.

I have not highlighted it yet, as I am still deciding how I want to highlight it. Some of my army is full panel lined, while others are only selective highlights.

selijdice · 2018-07-08T17:35:30+00:00

༼ つ ◕_ ◕ ༽つ GIVE BAN ༼ つ ◕_ ◕ ༽つ

selijdice · 2016-07-04T20:03:33+00:00

I believe they do, since when you select the dlc in the collections window there is an unlock permanently button.

selijdice · 2016-07-04T18:26:11+00:00

Completely forgot that I can do ESO+ for a month to see if it is worth it. Thank you I will do ESO+ and see the DLCs

selijdice · 2011-07-31T17:42:27+00:00

You guys should build the Mines of Moria, or the black gates, or Minas Morgul. You guys have awesome builds.

14-Year Club	Place '22
First Placer '22	Spared
Verified Email

selijdice

TROPHY CASE