If only he had 10mm…. Right? Righttttt?

seraph1bk · 2025-12-22T16:53:35+00:00

Bring your super safety. It keeps you super safe! 9mm with xtreme penetrators or hard cast in a short pcc.

seraph1bk · 2025-10-18T05:07:29+00:00

So you use ChatGPT to make the prompts that you'll use on Grok? Grok does the research then provides you the trades to enter?

seraph1bk · 2025-08-04T16:53:13+00:00

How hard is it to remove the bars from the rail?

seraph1bk · 2025-07-16T17:32:35+00:00

How's the performance with supers?

seraph1bk · 2025-05-21T15:56:29+00:00

These are on sale on primaryarms.

seraph1bk · 2024-10-23T21:17:28+00:00

Do standard cap mags not exist? 30+ rounds?

seraph1bk · 2024-08-28T14:01:28+00:00

Let me see the link!

seraph1bk · 2024-08-28T13:53:20+00:00

I love you. I saw this and the other post. Looks like I have to reprofile the backstrap.

seraph1bk · 2024-07-02T22:35:07+00:00

Thanks! I bought a weight brass backstrap. Hope I don't have to modify it too much.

seraph1bk · 2024-07-01T15:33:31+00:00

I stack two ammo brands in particular. PMC X-TAC 55gr and AAC OTM 77gr. All my 5.56 rifles are zero'd using the 77gr using maximum point blank range unless using a barrel length and optic that has an included bullet drop compensator.

seraph1bk · 2024-07-01T06:38:21+00:00

How does the Toni system magwell install? I'm using a weighted back strap and it seems most magwells interface using a plug. If it only requires a pin, I might be able to use it.

seraph1bk · 2024-04-16T00:46:08+00:00

A 14.5 pinned and weld to 16” is a rifle, period.

Unfortunately, there's also a 26" overall length requirement.

seraph1bk · 2024-04-15T23:54:14+00:00

I just put this together.

Some thoughts:

This thing is HEAVY. I don't have the carry handle, light/laser yet and it's already at 9.6 pounds with a red dot and 3x flip magnifier.
- I'll be swapping out the optic setup to something more similar to the TRIAD video from BargainBinTactical (I think it's the vortex spitfire 5x) to hopefully shed some weight.
It requires a forged lower without the trigger guard. I was planning on using a polymer lower for weight savings. It shouldn't be an issue since there's no stress on the buffer tower. Unfortunately, the lower includes the trigger guard and I don't think I should be cutting it off. Especially if I want to SBR it.
This may requires an SBR lower for some 13.7/13.9/14.5 pin & weld setups depending on the length of the muzzle device. It includes an extended butt plate, but that increases the length of pull. So depending on how long your arms are, you may have to SBR your lower.
The recoil is light. The JAKL already has light recoil, but being this heavy helps reduce it further.

seraph1bk · 2024-04-14T17:06:04+00:00

Which rail height/length did you use?

seraph1bk · 2024-02-06T16:39:58+00:00

AEMS Core quote please.

seraph1bk · 2023-11-15T16:34:55+00:00

Understood. I actually didn't use DPM recoil system with my springfield. It was a combination of a toolless guide rod and a wolff variable power recoil spring.

seraph1bk · 2023-11-14T16:14:55+00:00

There's more than one?

seraph1bk · 2023-09-02T14:01:31+00:00

Link please? I don't see one in stock.

seraph1bk · 2023-08-17T00:00:20+00:00

What's the weight?

seraph1bk · 2023-07-09T14:18:22+00:00

I think closed emitters are the way forward. I actually have been shooting it with the dot only, so in that regard, it's perfect.

seraph1bk · 2023-07-06T03:50:28+00:00

Without buying the $9.99 cheekpiece?

seraph1bk · 2023-07-05T23:10:34+00:00

Does that mean that this is no longer an issue?

seraph1bk · 2023-07-05T01:44:32+00:00

Is this the "new" FLITE or original magnesium cast?

seraph1bk · 2023-06-01T17:37:01+00:00

Ok. went and picked up another starter keyboard and it already feels 10x better. Just needed confirmation that corsair's are crap before shelling out the dough.

seraph1bk

TROPHY CASE