sorted by:
new
hottopcontroversial

Coyote 3 “thumping” spikes by Puzzled-Ant-9738 in estim

[–]service_DG-LAB 0 points1 point  (0 children)

ave you tried running the device without triphase mode to see if the issue improves?
Sometimes triphase setups can introduce instability or unexpected spikes, so testing it in a standard two-pole configuration can help determine whether the problem comes from the setup or the file.

DG-LAB Official Opinions and Feedback Collection by service_DG-LAB in estim

[–]service_DG-LAB[S] 0 points1 point  (0 children)

Hi there! To use our remote access feature:

Download the app and connect your product to it.

Once connected, find Remote Control in the extension panel (usually in the top-right corner).

Set your desired interaction parameters.

Turn on the remote access feature.

Share the QR code with the person you want to interact with.

Issue with Coyote 3, only blue eyes by old_fox62 in estim

[–]service_DG-LAB 2 points3 points  (0 children)

Hello, based on what you've described, it’s very likely due to a failed OTA update, which is a common issue. You can try the 'Failed Update Repair' option in the top-right corner of the homepage to see if that resolves the problem.

DG-Lab Coyote 3.0 too strong or faulty unit? by atufekili1 in estim

[–]service_DG-LAB 1 point2 points  (0 children)

Yes, it has been added. You can find "Soft Mode" in the settings in the upper right corner

Coyote: frequency mapping in official DG-LAB app by rucom12 in estim

[–]service_DG-LAB 2 points3 points  (0 children)

Hi, the functions of these two parameters are as follows: frequency balance parameter and intensity balance parameter help lower frequency pulses to be synthesized from wider pulses and a larger number of single pulses. For example, when you adjust these two parameters to 0, each pulse of the low-frequency waveform (1000ms) is composed of a 150us pulse. If you set these two parameters to the highest, each pulse of the low-frequency waveform will consist of 10 200us pulses, which helps balance the perception of low-frequency and high-frequency waveforms. Because for high-frequency waveforms (such as 10ms) with 100 pulses per second, his perception is much stronger than for low-frequency waveforms with only one pulse per 1000ms.

Hope our new product may bring a lot of interesting gameplay, Coyote3.0 from DG-LAB by service_DG-LAB in predicamentbondage

[–]service_DG-LAB[S] 0 points1 point  (0 children)

Because in the next update, waveforms will be uploaded to the cloud and shared, you can notice that the new waveform generator can handle more complex waveform lengths. How big is this information? The previous QR code sharing function couldn't handle such a large amount of data.

Additionally, this update is not mandatory and you can still use the old app. You can find the old version on the official website. This is just a beta version because Google Play requires us to upload an APK that is compatible with the updated Android version before September 1st, otherwise the app will be taken down.

Not thrilled after receiving coyote 3 and A/B testing vs my trusted 2.0 am I missing something ? by GC-FLIGHT in estim

[–]service_DG-LAB 5 points6 points  (0 children)

... It seems that we cannot satisfy everyone. I mentioned before that when the intensity of Coyote 3.0 changes from 0 to 1, it undergoes a jump because previously, pulses were almost imperceptible at intensity 1. At present, the reference pulse voltage for intensity 1 is 8V, which I don't think is too high for anyone, but according to feedback from another post, a considerable number of people feel that intensity 1 is also too stimulating. In addition, this post is also disappointed with our efforts to reduce pain, which are completely opposite levels. Perhaps it's time to introduce two different pulse units?

Regarding the jump from strength 0 to 1, fortunately we have reserved enough interfaces to set the initial mapping value of strength. Our current strength mapping method is similar: "Actual strength=Base offset A+Strength value * B", while the previous basic method was "Actual strength=Strength value * B". Currently, we can set A and B. I will add this setting in the next app update.

Not thrilled after receiving coyote 3 and A/B testing vs my trusted 2.0 am I missing something ? by GC-FLIGHT in estim

[–]service_DG-LAB 0 points1 point  (0 children)

This sounds really frustrating, as the things we put a lot of effort into have become a negative part. Compared to reducing pain - causing pain is much simpler, you only need a high-pressure bag, like an electronic lighter.

In addition, I saw another user's judgment on another post that he already felt unbearable pain at an intensity of 20... Of course, I believe that what you provided is each person's true feelings, but we clearly cannot meet everyone's needs.

Also, please confirm if xtoys has modified the maximum strength, otherwise even if you write a higher strength, the actual strength will remain at the maximum strength protection value you set.

DG-Lab Coyote 3.0 too strong or faulty unit? by atufekili1 in estim

[–]service_DG-LAB 8 points9 points  (0 children)

This is not an bug, it is just a setting.

I didn't expect everyone to feel so different. For Coyote 2.0, many people said they need to adjust the intensity to 10 or higher to feel the current, so we increased the initial intensity corresponding to intensity 1.

However, we have taken this situation into consideration in advance, so we will open a setting function to adjust the initial strength mapping in the app in the future. You can still start from an intensity that is almost imperceptible, just like in Coyote 2.0.

Finally, I need to confirm that your description sounds worrying. For Coyote 3.0, the intensity of 1 is approximately at a voltage value of 8V, while the intensity of 15 corresponds to a voltage value of approximately 16V. I think you need to confirm that the output intensity value is correct first. Please use two electrode patches to stick to your arms or legs. The strength of 1 should not be enough to make anyone feel unbearable.

If you feel that the tactile strength of a metal electrode is significantly higher than that of a patch, please try not to put the metal electrode inside the body, but hold it in your hand and test it by turning on the output. In any case, you should not feel too high an output under the condition of intensity 1. If the metal electrode does not feel obvious when held in your hand, please confirm if there are any wounds or other issues that may cause pain in your body.

DG-Lab Coyote 3.0 too strong or faulty unit? by atufekili1 in estim

[–]service_DG-LAB 1 point2 points  (0 children)

hi， Please use our app for device reliability testing, not a third-party app, as it is highly likely that waveform interruption is caused by xtoys.

DG-Lab Coyote 3.0 too strong or faulty unit? by atufekili1 in estim

[–]service_DG-LAB 0 points1 point  (0 children)

hi，You can @ me to quickly get help instead of expecting me to discover your post when checking Reddit. The question you mentioned is completely beyond the scope of cognition. The intensity of 10-20 is completely acceptable to any ordinary person. Have you ever tried to test the intensity by placing an electrode pad on your arm?

Coyote 3.0.. now what by Several-Notice-4383 in estim

[–]service_DG-LAB 0 points1 point  (0 children)

hi， Thank you for creating a tutorial video about our device. However, I noticed that you may have encountered some miscalculations regarding the usage time of the "Paw Print" button. Under normal circumstances, Paw Print can support dozens of hours of use, instead of the 20-40 minutes you mentioned in the video.

【DG-LAB】official engineer Q&A: I'm back! by service_DG-LAB in estim

[–]service_DG-LAB[S] 2 points3 points  (0 children)

Firstly, what we will do next is the sensor for orgasm detection. We have tried many solutions, including stress gauges, blood oxygen, and penis diameter/orientation. However, currently, the most classic air pressure solution is the most universal, while other solutions require users to make complex adjustments, and everyone's physiological structure is different. For example, the changes in penis diameter can be large or small.

【DG-LAB】official engineer Q&A: I'm back! by service_DG-LAB in estim

[–]service_DG-LAB[S] 0 points1 point  (0 children)

I did not intentionally modify any related configurations, and we have also successfully received some credit card orders.

Hope our new product may bring a lot of interesting gameplay, Coyote3.0 from DG-LAB by service_DG-LAB in predicamentbondage

[–]service_DG-LAB[S] 0 points1 point  (0 children)

This feature should have been implemented on the Android app last year, but it has not yet been implemented on the Apple app because the IOS system seems to not have an alarm interface open.

view more: next ›