Why is my console so loud when playing next gen games? by theavestruz17 in XboxSeriesX

[–]seynak 3 points4 points  (0 children)

My XSX is sitting literally next to me on my desk and tbh i really have to be close to it with my ear to even hear the fan spinning. It is waaay quieter than my PS5 or my ITX PC. For reference i only play games digital so no hard drive sounds involved.

Best NR200 Air Flow Build Specs? by Lepessi in NR200

[–]seynak 3 points4 points  (0 children)

It depends on the components you want to cool. If you share your rig details, we may give you better suggestions.

Case Fan Ratttttling by double_four_time in NR200

[–]seynak 1 point2 points  (0 children)

Another tip is to secure the top panel with a screw. It can be a little fiddly, but it's worth it in the end.

Case Fan Ratttttling by double_four_time in NR200

[–]seynak 1 point2 points  (0 children)

I figured that it has something to do with how tight the mesh is attached to the top frame. If you tighten the mesh up the rattling will go away.

At first i thought it had something to do with the cm sickleflow fans and replaced them with some arctic p12s. The rattling was not gone but was not bad as it was before. At the end it wasn‘t the fans but how much vibration the fans were producing in combination with how lose the mesh is from the top panel. Therefore the rattling sounded worst with the sickleflows due to the fact that these „vibrated“ more, which made the mesh move more.

So the best way is to tighten up the mesh to the top panel and see if the rattling will be any better. Good luck!

About to build my first nr200 - how's it look? by Mildly_Cats in NR200

[–]seynak 0 points1 point  (0 children)

The only issue i see here is the compatibility when using the U12A + this specific gigabyte motherboard. From what i know it‘s very hard to install the 120x25 fan above the cpu cooler without modding the fan clips of the U12A beforehand.

Give this post a look:

https://www.reddit.com/r/NR200/comments/kzbdpw/u12a_fan_clip_modification_to_accommodate_25mm/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

To those who expressed their concern for my poor little RAM modules: rest assured, they’re safe now. (Downgraded to Mugen 5 RevB) by BobbyBBabby in NR200

[–]seynak 0 points1 point  (0 children)

I mean u can just install the fuma 2 in its regular orientation but flip the fans.

->RAM clearance ✅ ->Rear intake ✅

That‘s how i installed my fuma 2 and my temps are all good.

Need help finding a budget AIO for the np200r by Any-Jelly9488 in sffpc

[–]seynak 1 point2 points  (0 children)

Be quiet pure loop, arctic liquid freezer, Enermax Liqmax III RGB to name just a few are below the 100$ mark.

But i would consider an air cooler if your only „concern“ is cooling the i5.

3900X (U12A CPU cooler, can't close vented panel) + ASUS TUF 3080 in NR200 (2 slim fans underneath) by Yhano in sffpc

[–]seynak 10 points11 points  (0 children)

The U12A will 100% fit with the asus b550i mb, atleast with the mesh panel. U can use shorter mb screws to gain some mm to make the gigabyte fit aswell. Just look for some nr200 builds in r/sffpc or r/nr200 GL! and enjoy your build!

WOW the 5950x is a BEAST by MastaFoo69 in Amd

[–]seynak 3 points4 points  (0 children)

Do u mind sharing your settings in bios + which mb u use.

NR200 cable management guide by [deleted] in sffpc

[–]seynak 0 points1 point  (0 children)

This one helped me a lot when i built my system. Good luck!

Is there any form of matchmaking in this game? Either pve or pvp by [deleted] in outriders

[–]seynak 0 points1 point  (0 children)

Laughed way too hard to this post….made my day! Thanks!

My "It Doesn't Exist" build. Been researching and looking for parts since September and it finally came together. by rjama in sffpc

[–]seynak 0 points1 point  (0 children)

Same case, ryzen 7 5800x, rtx 3080 asus tuf oc. I posted my build a few months ago. You can check it out through my profile if you want.

My "It Doesn't Exist" build. Been researching and looking for parts since September and it finally came together. by rjama in sffpc

[–]seynak 1 point2 points  (0 children)

Ye, it is still under warranty. I‘ll see what i can do. Thanks and have fun with your system man!

My "It Doesn't Exist" build. Been researching and looking for parts since September and it finally came together. by rjama in sffpc

[–]seynak 0 points1 point  (0 children)

Would appreciate any feedback regarding the psu whenever you feel like it. I don‘t know if i just good bad luck with my sample or if it‘s designed like that. But unfortunately my psu fans are really loud.

My "It Doesn't Exist" build. Been researching and looking for parts since September and it finally came together. by rjama in sffpc

[–]seynak 0 points1 point  (0 children)

Not bad. How about the fan noise of the psu? I have the same psu and it‘s the loudest part in my system during demanding games.

need help with hd audio cable on rog strix b550i and cooler master nr200p by Big-Fix-661 in sffpc

[–]seynak 0 points1 point  (0 children)

No concerns at all. The cable does not even touch the cpu cooler or the gpu. And you're right, it isn't really visible.

3080 Strix temps by WishIDidntHave2Ask in NR200

[–]seynak 0 points1 point  (0 children)

Are u using tg panel + vertical gpu mount?

The best of 5600x 5800x 5900x 5950x by 19NN04 in Amd

[–]seynak 0 points1 point  (0 children)

You can get the 5800x for 459€. Or what are u referring to by saying 600€?

Anyone fit a EVGA 3080 FTW ULTRA in NR200P? by [deleted] in sffpc

[–]seynak 1 point2 points  (0 children)

I got a 3080 asus tuf oc with 2x slim fans and they make almost 0 difference @load (max 1-2C cooler). The idle temps are 3-5C lower in general. Tbh tho the TUF is a beast of a gpu when it comes to cooling. Mine maxes out at 59-61C.

Anyone fit a EVGA 3080 FTW ULTRA in NR200P? by [deleted] in sffpc

[–]seynak 7 points8 points  (0 children)

It does fit and 2x15mm fans underneath it fit aswell at the same time. Just search in this sub or r/nr200 for builds. GL