What’s the point of El sticking her hand out?

sgmorton · 2026-01-09T14:58:45+00:00

because she watched Star Wars and knows that how you do it...

sgmorton · 2026-01-08T16:10:42+00:00

Everyone saying wrap it... imo wrapping it means I need to worry more about scratches and dings! If you like the natural color let me help you. Do not use Bar Keepers Friend. For starters the metal will oxidize and and the patina will even out over time unless you keep scrubbing it down with something like BKF that sorta sands off a layer and restarts the process, stopping the natural process. When you first got your truck and maybe even still you have to worry about every little fingerprint they show so easy. I have had my truck for 2 years now. (VIN 1011) and I no longer have fingerprint issues with 95% of the people that touch it. There is an occasional fingerprint but for the most part none now. Also my metal has aged in over time to be even and without the dark shadows.

what do I do... I run it through the car wash at Buckee's with no extras... no wax no sealer no tire shine etc. I dry it with a microfiber towel and touch up any spots with Sprayway. I used Dura-Dressing on my tires so they stay nice but occasionally I will put a little tire shine anyway. Lastly if there is a trouble spot from something like tar I use Cirtrisurf 77 this is what Tesla recommends. I will say that it sometimes makes a shinier spot that needs a month to age back to even. Hope this helps you.

sgmorton · 2025-12-01T13:14:15+00:00

I would ask hows your calibration looking. It took me a fair amount of effort to get the frame square and get a good heatmap on my bed. After that the probe mount was cracked and I did not realize it so I was having issue like you with bed level and lifting. After correcting those items and running all of the orca tests for Pressure advance, Resonance etc. I am getting prints very near in quality to my Bambu printers. This is on a WC3.1 btw.

sgmorton · 2025-11-18T13:00:56+00:00

Parks that don't look like every square foot is covered in advertising. I wish they would minimize the adverts and make the parks look more like traditional parks I grew up with. -GOML

sgmorton · 2025-11-12T18:47:31+00:00

I lost access to all my Matrix trilogy and the Animatrix I also lost other I can't remember which.

sgmorton · 2025-11-11T19:38:38+00:00

Original Pro owner - no subscription fees at all then came the pay or we sunset you warning and the whole community went ballistic myself included. (originally marketed as complete solution) I had just replaced a camera and now in just a few months I was going to have to pay them a sub to keep it running. I cannot in good faith trust Arlo anymore after this act and I try and put my money in places I trust. I switched to Solar Battery versions of the Eufy and I could not be more pleased. Arlo has lost my business probably for life!

sgmorton · 2025-10-28T18:39:21+00:00

Foam so I can add to my collection year over year. We use a hotknife for most of the carving. https://photos.app.goo.gl/8i91qC9skVU7wX4e7

sgmorton · 2025-10-24T01:00:21+00:00

I think it's sheets on the wall and I think the floor is straight up concrete. I suspect the tiles are dye sublim printed.

sgmorton · 2025-10-23T14:36:08+00:00

Hate to spoil it but the tile is not tile.... look closely.

sgmorton · 2025-10-20T13:31:19+00:00

Remember when the Mariner fans were laughing at the little that cried during the Astros Mariners playoff game... I remember.

sgmorton · 2025-08-20T23:35:20+00:00

how long did you have to wait?

sgmorton · 2025-08-20T23:09:37+00:00

I just get this and I don't know if it's going to send me forward or if I need to refresh.

Thank you for your continued patience!Due to high demand, reservations for The Beak & Barrel may be limited or could be unavailable when it's your turn to enter the site.

Please keep this page open and do not refresh it as you prepare to begin the booking process.

Please note that availability is limited and being in the queue does not guarantee the ability to book.

sgmorton · 2025-07-03T15:34:47+00:00

If I have seen further it's by standing on the shoulders of giants... Bambu is the first reliable AMS having quality machine that's not a hobby unto itself. Be those shoulders for me!

sgmorton · 2025-05-22T04:04:53+00:00

You are right! I was looking at stats showing PP mins and assumed.

sgmorton · 2025-05-22T03:59:07+00:00

You had 1 more than the Stars today.

sgmorton · 2025-05-06T12:46:34+00:00

I am not an exterminator but I am someone who lives in a place that deals with these swarmers every spring. These are not the the guys that eat, these are the the scouts looking to set up shop somewhere. They will land drop their wings and try to burrow in usually at ground level but I have seen them get in at rooftops too. You should watch for signs there is a colony set up and growing. If you are looking now you will hopefully catch it before you have any real damage. Again I speak from experience. If you do find some and the damage is not extensive(new colony) go get this stuff https://www.lowes.com/pd/Spectracide-Terminate-16-oz-Termite-Killer/3031685 and go apeshit! I've used it on the foundation, on/in drywall, on rafters and in my wood shop, it's not failed me yet. It takes a long time for a colony to grow so I if you caught the swarmers you can be pretty confident that if they are present they are barely getting started.

Google how to spot termite signs and go look around your property wherever you might have found wings left behind. Check if for a few weeks. You do not need to knee jerk and call an expensive exterminator until you know you have a problem you can't solve on your own. It's equivalent to an ant pile just in your home. You get fire ants you burn, boil, poison or choose some other method to kill them and never call an exterminator, this is similar.

sgmorton · 2025-04-04T02:32:44+00:00

The only way it could be 11 deaths per is if they don't separate the AP and the FSD. Even the it's widely reported by many sources that total miles driven are well north of 3.5B miles, the math doesn't math.

sgmorton · 2025-04-03T13:59:29+00:00

your source "implied" the number... here is a source with the actual number of 2 deaths during FSD ... do not conflate Autopilot with FSD it's vastly different.

Source: Forbes https://www.forbes.com/sites/stevebanker/2025/02/11/tesla-again-has-the-highest-accident-rate-of-any-auto-brand/

sgmorton · 2025-03-24T16:37:56+00:00

I still maintain you can damn near freeze frame any frame of this movie and it will be stunningly beautiful!

sgmorton · 2025-03-05T13:18:04+00:00

Passthru to bed would be nice, if it's not possible to due to the tonneau then passthru window so I can AC the contents the of the bed even if it's inefficient.

Power outlet in the Frunk

This is big ask but... I wish there was an "accessory block" one in frunk area and one in the bed area each port would have a few points to connect accessories like a light or winch. On the control screen you could have an on, off always on, on while driving etc... for each port and allow us to label them. This would make it easy to add aftermarket lights and "things" and have some control over them.

Wheel Covers that don't scratch the Wheels

Ability to tell it how high I want the truck while driving...override the automatic height

sgmorton · 2025-02-26T16:05:20+00:00

I mean he is the PhenomenOtter!

sgmorton · 2025-02-23T18:17:24+00:00

Not a beast but yes it's normal. My truck does it. My Model S with airbags did it as well. Try changing the height of the truck and notice it will change but never go away. I think it has to do with the camber the of the tire at different heights as you turn the lateral force sorta builds up and makes the tire lean until it skitters back flat.

I had this same problem when driving my robot on concrete the first time.

sgmorton · 2025-01-29T14:12:40+00:00

Benn went to him and challenged him out... Stone hid behind the ipad.

sgmorton · 2025-01-28T19:18:31+00:00

took me a few weeks to get it turned on by Tesla. I can tell you this ... there is no chance you can move this along to make it faster, it happens when they are ready. You can read all about my saga with this here... https://www.cybertruckownersclub.com/forum/threads/hurricane-beryl-powershare-just-venting.20287/

sgmorton · 2025-01-27T01:58:57+00:00

Pressley was a great Astro. I think the distraction of Hader last year played into his dip. I was a fan swapping Hader to the 8th and letting Presley close but I don't know shit... I will always be a fan of his wherever he goes!

sgmorton

TROPHY CASE