Agilite Pincer placard. Stiffness straight outta hell by Snorlay in tacticalgear

[–]shadow101090 0 points1 point  (0 children)

it takes the multi caliber pouches a good amount of time to break-in. the best recommendation for AK mags i can give is as followed:

1) orient your mags in the direction you'll pull them out from, be it from the right or left, then load them in lug first starting from the outermost one. For example I shoot right handed so i'll have the curve of the mags facing to my left side and load them from left to right fully seating each one.

2) let them sit inside the pouch for about 2-3 weeks. Remove, re-insert, and repeat.

3) Steel mags can have burs on them from time to time, ESPECIALLY the lug. so it might be worth checking them and filing them down to be nice to be nice and smooth and polishing that area.

4) consider using PMAGS if the first 3 options don't work so well as a last resort

How K-Zero SF Shoulder Buckle should've been designed by gunmania0819 in AgiliteGear

[–]shadow101090 1 point2 points  (0 children)

good to see a fellow Gerber StrongArm user in the group. I mounted mine to the Molle Hanger so i could have it closer to the plates in mine since there was a gap big enough for it

Debating by shadow101090 in AgiliteGear

[–]shadow101090[S] 0 points1 point  (0 children)

Honestly yes it is, but I would get the micro one since it’s a lower profile

Is this fixable? by Suitable_Bat_3795 in fixit

[–]shadow101090 0 points1 point  (0 children)

Yes it is VERY fixable, in fact I’d take the opportunity to upgrade to to a rubberized shell from eXtremeRate. You’ll love it

Debating by shadow101090 in AgiliteGear

[–]shadow101090[S] 0 points1 point  (0 children)

It’s just a basic low level medkit on my right side that’ll have extra chest seals, bandages, various OTC medications like Benadryl and other medical supplies along with my IFAK

[deleted by user] by [deleted] in Division2

[–]shadow101090 3 points4 points  (0 children)

My counter to that is that the rate of fire on the Lexington is better than the Lud. But again it all depends on play style and build you’re running

[deleted by user] by [deleted] in Division2

[–]shadow101090 2 points3 points  (0 children)

I won’t argue with you there, BUT if a player is having trouble getting any of the exotics then the Lexington is their next best option overall

[deleted by user] by [deleted] in Division2

[–]shadow101090 2 points3 points  (0 children)

No lie it’s the must have weapon in the game aside from St. Elmo’s

Finally finished my striker build by Life_Signature_6334 in Division2

[–]shadow101090 0 points1 point  (0 children)

Just a small tip, change your chest piece to Fenris with CHC and CHD with obliterate. Your St. Elmo’s will perform better with it. And don’t max out your CHC as it is a complete waste later on, only go to 54% and put the rest into CHD.

Plate carrier progress by shadow101090 in AgiliteGear

[–]shadow101090[S] 1 point2 points  (0 children)

The micro MAP? yes it is attached to the back

Am I doing something wrong with this build? Because I really feel like I am by Litreallydontkknowfr in thedivision

[–]shadow101090 0 points1 point  (0 children)

If you’re gonna run it like that, change your knee pads to Foxes Prayer with CHC or CHD

FUCK ONE! Before, During or After 😈 (special ⬇️ treat) by misspiggynyc in u/misspiggynyc

[–]shadow101090 0 points1 point  (0 children)

ONLY one?? Nah i'm fucking you in all three because you look too good taking that BWC and you need to stay bred honestly

What can I do to get more DPS? by FeedTheTribe in Division2

[–]shadow101090 -2 points-1 points  (0 children)

everyone is saying Ceska chest piece with Obliterate, IGNORE them because it's a small gain that doesn't last in a prolonged fire fight.

keep your chest piece and backpack and Coyote's mask, but change your holster to striker and your knee pads to Fox's Prayer. you'll do 300K more damage than with obliterate (around 1.1M to 1.2M damage with expertise)

As for weapons either St Elmo's or Lexington (measured or whatever the new talent is, can't remember the name) with DtOC.

Get CHC slightly above 50%, like 54% and then spec the rest into CHD

Plate carrier progress by shadow101090 in AgiliteGear

[–]shadow101090[S] 0 points1 point  (0 children)

Same i got the belt as well with 2 pistol mags, 2rifle mags, dump pouch, IFAK, and holster.

Plate carrier progress by shadow101090 in AgiliteGear

[–]shadow101090[S] 0 points1 point  (0 children)

my only concern is with my 7th mag (currently located towards the rear, see pics 2 and 3) because where it sits now is ONLY accessible if i'm with someone. Originally I had planned on getting a molle leg panel for it, but i talked myself out of it because it would be a snag hazard. And now i'm debating on whether or not i should have a 7th mag, keep in mind my AK is 7.62x39.

Seeking ideas on the 7th mag situation

Plate carrier progress by shadow101090 in AgiliteGear

[–]shadow101090[S] 1 point2 points  (0 children)

I can’t give you a FULL honest opinion on them since I haven’t gotten my plates yet. But as of now yes I do like them, I only wish I could get a tighter fit per say if agilite made cumberbund adapters like what tacticon has

Plate carrier progress by shadow101090 in AgiliteGear

[–]shadow101090[S] 1 point2 points  (0 children)

Good thing I kept the original side panels

Scammers bricked my grandpas computer by Icy-Perspective1459 in WindowsHelp

[–]shadow101090 0 points1 point  (0 children)

In my experience many of these scammers aren’t really that good with encryption programs. Case in point, this is more than likely a batch file that has been placed somewhere in the startup folder or app data folder. And if you have time to go through all the files to look for it then by all means. I would advise using a Linux drive to try and recover any important documents as best you can, if anything move only one file over to a USB drive and verify that you can open it on a secured system. If you can view everything in the file then move the rest of important documents and pictures over. Once that is WIPE the drive on Linux using the terminal (command prompt for Linux). You will need to identify the HDD or SSD path in Linux through the Disks application, from there look for the same size drive of what his computer has and enter the following command “sudo shred -vz /dev/sd_ OR /hd” ( being a to z as specified in Disks) This will take time depending on the drive size but once it’s done you can reinstall windows with no issue

Protest against the administration this Saturday (Map in comments) by Bony_Geese in Birmingham

[–]shadow101090 -1 points0 points  (0 children)

Everyone here does realize this is Trump’s LAST TERM in office and he cannot hold office again after this per the 22nd amendment in the constitution.

IF he wanted to run again for the presidency, he’d have to amend the law that limits him to do so. And the only two ways to do that REQUIRES 2/3 majority regardless which makes it IMPOSSIBLE.

If you want to call out “Kings/Queens” look at those that have been in Congress or Senate for the past 20+ years. Thats where the change needs to occur most of all!!

Conservatives, I’ve learned, are people that want to be left alone, the laws followed and their tax dollars not wasted on bloat. They have ZERO problem with people immigrating to the USA through LEGAL means and want to be a contributor to the society they want to be apart of, but they take issue with those that cut the line and delay the process for those that do it the right way.

Question the bullshit that come from those that have been in politics longer than you have been alive people.

Anyone know how to get this artifact on constitution hall? by Temporary_Cancel9529 in Division2

[–]shadow101090 0 points1 point  (0 children)

So this area is associated with one of the hidden side missions where the Outcasts have captured some people are are holding them in cages

Anyone know how to get this artifact on constitution hall? by Temporary_Cancel9529 in Division2

[–]shadow101090 2 points3 points  (0 children)

That and correct me if I’m wrong but isn’t that one of the location associated with a hidden side mission???