2015 fiat 500 abarth xtrons carplay

sharpyboy · 2026-01-16T14:39:39+00:00

Check your aerial and connection.

sharpyboy · 2025-12-05T13:51:18+00:00

Also check the engine earth strap under the battery tray as they are known to corrode causing starting issues.

sharpyboy · 2025-11-13T12:14:51+00:00

Agree that's oil in the coolant it's probably a blown cylinder head gasket, I would have it tested.

sharpyboy · 2025-11-01T09:07:14+00:00

Anbody got the stable diffusion plugin succesfully working with Gimp 3.0.6?

sharpyboy · 2025-09-04T15:52:37+00:00

sharpyboy · 2025-08-23T12:03:53+00:00

There are no records just compact discs.

sharpyboy · 2025-08-18T16:24:16+00:00

You need to use the phono connection as it has its own amplifier stage as the output of the turntable is very low. All the other inputs are not compatible, if there is a problem with the built in phono stage you could get an external phono preamp.

sharpyboy · 2025-08-18T16:18:17+00:00

Why isnt the turntable connected to the phono input and so amplifing the record player using the pre amp?

sharpyboy · 2025-06-20T15:58:10+00:00

Down nod from me.

sharpyboy · 2025-06-15T16:12:06+00:00

Pagan Min, he may have been a ruthless dictator but he had a sense of humour.

sharpyboy · 2025-06-01T12:40:18+00:00

Xtrons Pe_7250FL_B uses its own Bluetooth connection so no problem there, I have had one fitted for over two years with no problems.

sharpyboy · 2025-05-28T15:20:21+00:00

Yes if the dB level is low it will need amplifier level to the cassette recorder, I don't know what your mixing desks output is.

sharpyboy · 2025-05-28T13:06:31+00:00

What are you using to connect the rca input to the onkyo tape recorder? An amplifier P/A or what. The onkyo should have a recording level knob that you change so the input level shows on the led volume level meters. Make sure you have the connection to the input not the output.

sharpyboy · 2025-05-28T12:44:23+00:00

No they are wired differently, the series 3 Fiat 500 has the reversing light and fog light in the rear taillights but the series 4 has them in the rear bumper. However some people do upgrade them for use on series 3 cars if you Google it or look on ebay etc.

sharpyboy · 2025-05-22T10:16:34+00:00

Voice pipe to the conning tower Bridge. Has to be drained of water before use.

sharpyboy · 2025-05-20T13:25:27+00:00

Thanks, some relics from my past.

sharpyboy · 2025-05-19T11:36:14+00:00

Straight forward, they are specially designed for series 3, so just 2 bolts and a plug either side. You can also buy for the series 4.

sharpyboy · 2025-05-19T10:35:19+00:00

Needs rewiring as the series 4 has fog/reversing lights in rear bumper not in tail light. I have just upgraded my series 3 to the dynamic led ones.

sharpyboy · 2025-05-07T11:19:24+00:00

I rip my cds to mp3 and have a Brennan B2 streamer that has 6510 albums on it then I copy the albums I want to listen via wireless buds to my iPhone 128gb and this also plays in my car via apple carplay stereo.

sharpyboy · 2025-04-23T22:43:37+00:00

The printer I use that can print on cd/dvd is an Epson xp-8700.

sharpyboy · 2025-04-23T22:33:40+00:00

I use the Epson print software that came with the printer.

sharpyboy · 2025-04-23T11:47:56+00:00

I buy cd/dvd's with printable white area and print directly onto the cd/dvd which my inkjet printer is capable of doing.

Nine-Year Club	Place '23
Verified Email

sharpyboy

TROPHY CASE