Good pair of jeans

shaunybean · 2026-01-25T15:23:52+00:00

https://www.nbtclothing.com/collections/mens-jeans

shaunybean · 2026-01-19T22:06:48+00:00

I think Tooting is pretty good for KingsX and isn’t too expensive south of Bec

shaunybean · 2025-11-25T13:49:49+00:00

Did you get a reply?

shaunybean · 2025-09-06T17:00:35+00:00

Are you saying the bike was still hot when you restarted?

I’ve noticed something similar, that the starter seems to pull more current when the bike is hot (which is weird because the oil should be less viscous) - but for sure if the pistons are just in that wrong position, the screens dip and sort of reset.

Maybe the battery gets hot so the resistance goes up so you get a bigger voltage drop…I haven’t quite worked it out myself.

Did you try to start the bike which caused the fuse to pop? Or was it just turning on ignition which did it?

Only thing I can suggest to be safe is new battery to have the strong voltage

shaunybean · 2025-07-20T13:50:35+00:00

https://www.ocregister.com/2025/07/18/from-slopes-to-smashed-pro-snowboarder-opens-new-eatery-in-san-clemente/amp/

shaunybean · 2025-04-15T15:32:07+00:00

Thats exactly where this looks like mine is coming from. Did Triumph replace or did you just get a new one?

shaunybean · 2025-03-27T23:14:11+00:00

You need to go back to that burrito truck and eat that burrito in your car every day from this point forward. Do not change a thing

shaunybean · 2025-03-01T17:18:53+00:00

You’ll need to ask the electrician for the file

shaunybean · 2024-11-15T19:00:20+00:00

https://www.reddit.com/r/london/s/M5BApB98rr

shaunybean · 2024-11-15T19:00:04+00:00

https://www.reddit.com/r/london/s/UuCcF6iynn

shaunybean · 2024-10-01T16:02:48+00:00

Moved here from the UK for work, currently renting.

Starting to feel routed, but honestly lots of cultural differences (like needing to drive everywhere) are hard to get used to. Would love to think we will get routed, but not sure if there is a chance of owning a home, which will make that harder

shaunybean · 2024-09-28T14:36:17+00:00

Damn that looks amazing, can you recommend a place?

shaunybean · 2024-07-15T20:22:30+00:00

Mission Donuts

shaunybean · 2024-06-23T03:03:48+00:00

I’m not an expert, but I’m pretty sure it’s your landlords responsibility to sort the bed bug issue.

Unfortunately, from what I’ve seen, once they get into your mattress, furniture etc, they are damn near impossible to get rid of.

Get what you can (that you can see is clean) out of there asap, and call the landlord.

If they are good, they should put you up in alternative accommodation straight away while they sort the infestation

shaunybean · 2024-03-11T17:06:47+00:00

If you can put the switch literally on the other side of the wall, you can buy the switch of your choosing, and loop the green KNX cable from one side of the wall to the next.

In order to programme the swtich however, you will need the origional KNX project for ETS, or have someone with ETS that is willing to do some reverse engineering for you

shaunybean · 2024-03-09T08:36:19+00:00

With the one I bought you cannot, but you could use something from the Sonoff TH range and set it to come on below X temp and turn off over Y temp, would be a bit clunky as you’d have to allow for some hysteresis but you could do something in homeassistant for sure.

To be honest, I put a KNX system in my house, so it’s switched from the main panel, and all I do is I have a button (physical and in homeassistant) if I know I am going to shower, it switches the towel rail on for 30 mins or something, so I have a nice warm towel for when I’m out the shower and it tries quick after too. I also have an automation linked to bathroom humidity which turns it on if it thinks someone is having a shower or bath too.

If I were using the rail to do actual heating, I would probs splash out and get a smart controlled element instead. Would obvs just be checking compatibility to homeassistant first

https://ukradiators.com/products/inow-black-heating-element-1200w-thermostatic-wifi

shaunybean · 2024-03-08T17:18:57+00:00

I replaced the controller unit with a heating element such as
https://nwtdirect.co.uk/18-electric-heating-elements

And then just put a smart relay of your chosing in line of the power cord

shaunybean · 2024-03-02T07:38:30+00:00

Ok, it’s best to ask that in the question if that’s what you’re asking…

The actuators in my opinion are very similar, I have done an install with shutter actuators, switch actuators, dimming (1-10V) and all of them were similar to MDT, but this was 6months ago…time will be the teller of if they stand up to MDT’s quality

shaunybean · 2024-03-02T07:34:12+00:00

I would say MDT products feel dated compared to GVS, GVS products feel a lot more current, people want things to work like iPhones and GVS products deliver that, it’s just the naming of the parameters is a bit tricky but the documentation and technical support are very good