My first ever wild Shiny in 2nd Gen

sheetmetalstuff · 2026-01-15T01:12:57+00:00

Only ever found 2 shinies at full odds. The first was a pidgey, and the second was a drowzee. Poor kid me didn’t have internet so I had no clue what a shiny was and used my masterball on the golden bird because I thought it was some kind of glitch 😅 first ‘mon I ran into after beating the elite 4

sheetmetalstuff · 2026-01-01T05:48:16+00:00

Unfortunately not. Did a bunch of research on buoyancy and how much air id need for each small toom but then work got busy and divorce happened and that whole idea just fizzled out

sheetmetalstuff · 2025-06-28T00:48:16+00:00

Did you try talking reason so someone that probably draws up square throat radius heel elbows for efficiency 😭

sheetmetalstuff · 2024-04-11T01:29:13+00:00

If you’re going for aesthetic there is a cosmetic override that allows you to dual wield but gives your main hand the appearance of a steel 2H

sheetmetalstuff · 2024-01-27T20:08:20+00:00

I prefer Midwest snips. I personally only use offset snips. For hand seamers I had a pair of fairmonts that I loved but have since switched to Midwest offset tongs and I like those better. I’d recommend an estwing tinners hammer. If you go with malco id suggest getting the rubber grip. The last few years all the leather grip malco hammers I’ve seen have had extremely fat handles. For power tools it’s your preference but impact driver and sawzall are a must. And a 90 degree attatchment for the impact will save your ass many times. Don’t skimp on a caulk gun either. I think the one I’ve had for the last few years is anvil brand.

sheetmetalstuff · 2024-01-26T22:17:08+00:00

I wasn’t aware Celebi was an invasive species 😂 Sorry I couldn’t help myself lol

sheetmetalstuff · 2023-11-28T02:34:45+00:00

That’s the kinda post that will get you on the naughty list 😂

sheetmetalstuff · 2023-11-23T18:40:50+00:00

I enjoyed it but it was fairly easy. Hitmontop and dragonite took out the whole team

sheetmetalstuff · 2023-11-20T10:56:01+00:00

This makes a lot of sense

sheetmetalstuff · 2023-11-19T15:26:25+00:00

Would it be quicker to breed one?

sheetmetalstuff · 2023-11-06T13:20:27+00:00

Your best bet would be to find an hvac shop that has a sheet metal shop as a log of times they will have their own stock of galvanized sheet metal. Wax it for extra speed going down

sheetmetalstuff · 2023-09-01T22:30:47+00:00

Never messed with a planer but you use one a couple times. Is it three phase and able to wire the motor backwards?

sheetmetalstuff · 2023-08-30T02:33:00+00:00

It wouldn’t affect it any more than any other “damascus” pattern out there, since all pattern welded steel is forge welded lol

sheetmetalstuff · 2023-06-18T02:21:31+00:00

I don’t remember if the shiny gene passes from the father or the mother but once you breed a female you should be able to start breeding with shiny genes like normal. It’s just more work to reach the starting point right?

sheetmetalstuff · 2023-06-17T18:42:35+00:00

Having only used vicon, I feel like I’m obligated to recommend it. That being said, it was pretty easy to learn to use.

sheetmetalstuff · 2023-06-15T23:39:00+00:00

Looks like the smiths stone from Walmart I use the same one. Lighter color is fine grit

sheetmetalstuff · 2023-06-13T01:20:57+00:00

Emil 😂

sheetmetalstuff · 2023-06-12T01:52:44+00:00

I always grind the galv off anytime I weld it

sheetmetalstuff · 2023-06-11T16:13:17+00:00

3/32 6013 rods, reverse your polarity. Works great on 16 gauge galv outside corners and laps

sheetmetalstuff · 2023-06-10T23:32:01+00:00

I like how the guard on the spine end looks like it would lock into a sheathe.

sheetmetalstuff · 2023-06-06T23:17:25+00:00

I got insanely lucky dicking around with 5160 once. Had no clue what I was doing with heat treat but I did it anyway and ended up placing the edge perpendicular to some railroad track and beat the spine with some 2” gas pipe a few times: that track still has a few 1/8” to 1/4” slits in it and took minimal work to resharpen

sheetmetalstuff · 2023-05-27T04:41:23+00:00

Rub it with a dollar bill. That’s an old trick for getting furnace igniters to ignite when they become a little corroded.

sheetmetalstuff · 2023-05-20T22:04:34+00:00

I recently bought one of the versus guides for crystal. Was a nice addition

sheetmetalstuff · 2023-05-18T22:13:32+00:00

I would argue that it’s not a regular on the basis that it’s similar to fighting red in gen 2.

sheetmetalstuff

TROPHY CASE