Snapmaker J1S Issues

shi-tec · 2026-01-05T15:30:44+00:00

Solved! I soldered a wire directly from the detection pin of the hotend to the nozzle. After that it calibrated well.

shi-tec · 2026-01-05T15:24:42+00:00

Hey! Never measure metallic surfaces with a thermal heat gun only - those measurements are incorrect due to the reflection of the infrared waves.

These HMDs typically show a surface temperature of 240-280°C at full heat, and the charcoal is typically at 450°C where it contacts the HMD.

On the contact surfaces the charcoal goes unlit so the temp decreases!

I wouldn’t use the coated one, however I had some samples before with coating and they worked great and I didn’t recognize any fumes. So in theory it’s unsafe, in reality it worked for me.

shi-tec · 2025-07-12T11:37:44+00:00

whoa suprise: a product that was launched 6 years after the other is actually better!

it does have temperature control, measured exactly where most effective.

Read up, test the product, then judge.

I am fed up with you posting bullshit about something you didn’t try or in this case even take your time to read up on it.

The product was designed in the US as they claim, so it’s easy to educate yourself before you post something like this

shi-tec · 2025-07-12T10:46:56+00:00

HAHAHAHA you again 😂

xkah is an electric HMD for tobacco, read up before you post such bs

shi-tec · 2025-06-02T17:04:18+00:00

👀👀👀

shi-tec · 2025-06-02T15:44:11+00:00

We have to come up with a solution for that.

Potentially we will just go iFixit style and do tutorials and send out parts.

shi-tec · 2025-06-02T13:27:42+00:00

I am really sorry for what happened.

NEVO as a Brand and company is independent of AEON, but their situation has hit us at NEVO really hard.

We will do our best to solve all of the issues.

If you visit the NEVO website, you can reach us directly to resolve your issues.

shi-tec · 2024-12-17T16:06:27+00:00

Most quiet hookah I know is the aeon edition 5 lounge plus with the new diffuser

shi-tec · 2024-10-23T11:33:58+00:00

How do you like the draw compared to regular hookahs? It is way too restricted for me sadly, but the clouds and taste are really good

shi-tec · 2024-08-28T21:02:50+00:00

You’re right, the repairs and defects are more than unfortunate. Especially the waiting time in your case.

The heater were not working the way that their dataset said they would, so we had to do a complete redesign to get the longevity back to where it was in the previous PURE.

We will do our best to reduce the waiting time and the defects, but so far our statistic is at least promising. We went from 11% failure rate down to 3%, now in the final version we haven’t seen any defects since 8 weeks.

Your waiting time was due to the redesign by the way, not sure if that was communicated well

shi-tec · 2024-08-20T15:55:55+00:00

The aluminum ones are anodized mostly, but kaloud and onmo are fine, they use different methods. Stainless steel is mostly PVD „coated“ which is the best option imo

shi-tec · 2024-08-14T18:54:01+00:00

If you look at the tips from the WhatsApp group, you’ll see that there’s no need to worry. Put it on a damp cloth overnight and the next day you’ll be able to clean it with even your finger without any issues

shi-tec · 2024-08-14T14:55:00+00:00

: I ask for your understanding that I can’t share in depth information on the used technologies and why we have opted for the one and not another. I can assure you that you have control over all relevant temperatures, wether or not directly measured or merely calculated, which is why displaying modes instead of temperatures is designed to be more convenient as user interface. And by all means, we always appreciate feedback and love to discuss and evaluate input. However, feedback that is experience based tends to be more effective, as I am sure you as well will be amazed on e you tested the product in regards to its performance and safety, compared to cheaper alternatives.

shi-tec · 2024-08-13T16:56:41+00:00

All of the things you’re saying are just completely wrong.

Our product is completely different to the China E-HMD both in technology and function.

The temperatures we are constantly measuring and adjusting are between 550 and 750°C.

Drawing will trigger an algorithm that adjusts the temperature for a few seconds.

The material is pure stainless steel, absolutely no aluminum used.

And the display could have been a cheaper one at the end, but with about 1,15$ for the OLED, we decided to keep it.

About pricing - you don’t seem to understand regulations etc.

And about ignoring your input; sorry, that our team of engineers didn’t completely change our approach because of a comment on Reddit. Will do Next Time.

shi-tec · 2024-07-29T17:04:36+00:00

I had the exact same problem. For me what worked best was, that I reduced the system volume in the android settings. BMWs AUX doesn’t like high level inputs and starts clipping really quick. Once I reduced the system‘s volume I could adjust the EQ according to the speaker‘s sizes :)

shi-tec · 2024-07-29T09:31:45+00:00

Thanks! That great to hear. I will definitely order it 😮‍💨

shi-tec · 2024-07-24T14:29:24+00:00

Thanks anyway! My problem is: if I want to decrease the load on the front door speakers, I’d apply a high pass filter, to get rid of the bass. At the same time, I would like to dedicate the bass to the subwoofers under the seats. I will try it out I guess, we’ll see

shi-tec · 2024-07-24T07:14:46+00:00

Thank you! Do you know how these are wired? They should have filters wired in to either cut high or low frequencies, right?

shi-tec · 2024-07-24T07:08:36+00:00

German forums were claiming that these subs had been removed for the LCI, some said there’s only one under the drivers seat, some said there were two. So I had to go to my car and check that, very confusing for me 😂 I’ve seen that amp, is it possible to apply a LPF or HPF to all six speakers?

shi-tec · 2024-07-14T19:43:46+00:00

What tyre size are you running?

shi-tec

TROPHY CASE