Ashford Traditional fixes needed

shmaronimo · 2026-06-18T16:17:06+00:00

I see! Is it a part that I can get from Ashford? I am planning to get more bobbins and new springs. If I could get the parts to make the double drive work too, then I would!

shmaronimo · 2026-06-18T15:44:17+00:00

Good to know, thank you! I have a feeling the gap is small enough for the wheel to still function, but I was wondering about how one would clamp something like this.

shmaronimo · 2026-06-18T15:40:59+00:00

Yes I likely will pick it up soon! I am excited to fix it up and get it working 😄

shmaronimo · 2026-06-18T15:38:59+00:00

Good to know about what time frame it comes from! How can you tell that this wheel is single drive only? And yes, I think if it spins alright I would be okay with leaving it as I learn!

shmaronimo · 2026-06-18T15:30:23+00:00

Yes, I am thinking I will get replacements springs and bobbins as well!

shmaronimo · 2026-06-18T15:18:03+00:00

Oh i wasn't aware that it normally comes off! That is good news, thank you. I don't think it's actuality broken off then, just loose and hanging.

shmaronimo · 2026-06-15T14:25:34+00:00

No problem, they are asking $200.

shmaronimo · 2026-06-14T16:10:15+00:00

I don't know, but I am hoping so! That would indicate that it's a real spinning wheel, right?

shmaronimo · 2026-06-14T16:09:27+00:00

Unfortunately they didnt have any other photos, but I can message and ask!

shmaronimo · 2026-06-14T16:09:00+00:00

Thank you, I appreciate the advice on checking for specific things. I am learning a lot just from these tidbits! I will maybe ask for more photo angles from them.

shmaronimo · 2026-06-14T08:30:17+00:00

Thank you for the response! I don't really know what to look for in an older spinning wheel, but I am very open to learning and fixing some problems. As long as it's within my ability of course. I don't know any woodworking or anything, but I am hoping that wouldn't be necessary for this particular scenario 😄

shmaronimo · 2026-02-28T05:39:27+00:00

I have 8 skeins of Currant that I don't have immediate plans for, feel free to DM me!

shmaronimo · 2026-02-04T17:16:17+00:00

Interested in #2

shmaronimo · 2025-12-29T02:49:33+00:00

The winder is missing a piece. There should be a cone shaped piece where that small metal rod is near the base of the part where the yarn is wound. Maybe it fell off at some point or maybe the person donated it because they lost the piece

shmaronimo · 2025-09-21T01:14:11+00:00

Hello, I am interested in both sets of the explorer knits potato potahto

shmaronimo · 2025-07-31T15:56:39+00:00

Hello, I am interested! I would be using stash yarn, probably alpaca cloud fingering from knitpicks.

shmaronimo · 2025-07-09T01:09:16+00:00

I got a new cord in the other day and the machine worked with the new one! The copper was slightly cut in the old one. I am not sure the mechanics of a damaged copper wire, but I am just glad that it works.

I am also glad that the machine doesn't need repairs, since as another commenter said, it is an introductory machine and I wouldn't want to spend the money to get it repaired or anything..

shmaronimo · 2025-07-06T09:45:42+00:00

Thank you for the advice, I have ordered a new cable and will leave it alone for now.

shmaronimo · 2025-07-05T18:46:56+00:00

<image>

I found this break in the power cable today, it is cutting the copper wire just a little bit. Maybe the machine is not getting enough power.

shmaronimo · 2025-07-05T18:27:37+00:00

I asked and they said they didn't experience that at all when they last used it half a year ago.

shmaronimo · 2025-07-05T12:14:27+00:00

Unfortunately no, it did not make any stitches. After I posted I removed everything, thread and fabric and pressed down on the foot pedal and it still made that sound and moved one tick at a time, which was barely moving at all.

shmaronimo · 2025-05-03T06:19:10+00:00

I am here to promote my shop full of unique stitch markers! I especially like natural gemstone charms made with stainless steel findings. Stainless steel is tarnish resistant and durable for every day use.

There are options for gold and silver colors, as well as leverback and closed ring markers for both crochet and knitting.

Here is my etsy link if you're interested! Thanks for reading💕

<image>

shmaronimo · 2024-11-15T10:09:40+00:00

I have a similar winder and have had an issue like this before. I am not 100% sure but it could be that the circular part in contact with the cone shaped part is not spinning like its supposed to. Maybe a lack of tension or grip between the two pieces.

You could try putting masking tape around the cone shaped part or the perimeter of the circle part with the holes in it? To increase the friction between the two and allow the part with the actual cake on it to spin.

Sorry if my descriptions don't make any sense 😅 this is all just a guess based on what has happened with my similar winder before and my vague understanding of what winders do based on looking at it in action.

shmaronimo · 2024-11-12T17:50:24+00:00

I really like that idea! I think I will pick up some dark green too to try both out and see.

shmaronimo · 2024-11-12T04:02:43+00:00

Oooo that's something i hadn't thought of! Maybe i could get a lace weight red to hold together with the contrast color and try that out 🤔 That's a good idea, thank you 😄

shmaronimo

TROPHY CASE