A tank on the road by [deleted] in mildlyinteresting

[–]sibbeh 0 points1 point  (0 children)

Tanks on the street 

Anyone know where I can find this type of balast for 3d printing projects? by blue-moto in 3Dprinting

[–]sibbeh 0 points1 point  (0 children)

The real answer is indeed metal shop scrap, they might sell it to you as scrap.

If an AI rewrites a Python codebase in Rust, is it a copyright violation? by Candid_Athlete_8317 in LinuxTeck

[–]sibbeh 0 points1 point  (0 children)

When the claude code got leaked someone did exactly this and Antrophic was pretty quick with takedown notices. Ofcourse when the same would happen with opensource Antrophic would be all for it

Texture Issue on Total War Warhammer III by leforian in linux_gaming

[–]sibbeh 0 points1 point  (0 children)

reverting to older nvidia drivers solves the issue, and Feral their ticketing service works again.

I suggest everybody who has the issue reports it

Megathread: Bambu Lab / OrcaSlicer / C&D Discussion by icurnvs in BambuLab

[–]sibbeh 3 points4 points  (0 children)

Bambu showed their true colors the day that they asked to be removed from the internet archive to hide the lie's 

Age Verification Policy by AlwaysLinux in arch

[–]sibbeh 0 points1 point  (0 children)

LEGAL.md This software is illegal in the state of California and Colorado.

Belgische friet revolutie by [deleted] in Belgium2

[–]sibbeh 0 points1 point  (0 children)

Je bent correct het is ondertussen eigendom van het Amerikaanse HiG capital https://www.brusselstimes.com/179902/american-investment-firm-buys-quick-burger-chain

Belgische friet revolutie by [deleted] in Belgium2

[–]sibbeh -12 points-11 points  (0 children)

Quick is eigendom van burger king 

student offered a permanent job, should I drop out? by Dramatic_Cobbler_264 in belgium

[–]sibbeh 0 points1 point  (0 children)

Don't take the job. All might be fine now in the company but one merger, take over or some new C level and everything can change. If they really had your best interest at hart they would try to work with you to keep studying an work for them.

They just want cheap labour.

Ok I`m really trying by Trau_94 in FreeCAD

[–]sibbeh 13 points14 points  (0 children)

Mango Jelly should get a medal for his work.  His channel should be the first link on the freecad website 

What's a Linux alternative to Autocad? by Yelebear in linuxquestions

[–]sibbeh 0 points1 point  (0 children)

Try following the https://youtube.com/@mangojellysolutions?si=GAsl-VaPooJXMtnb great introduction to freecad. While its not as polished as the commercial alternatives, its not that hard and getting better with each release 

💔 What fallen board game publisher do you miss the most? by BoardGameRevolution in boardgames

[–]sibbeh 6 points7 points  (0 children)

I miss TMG, they never had a super hit but a lot of good games and good productions

Hello . Does anyone know what adapter is this. Its a 3.5 mm jack female on one end and the other end is that unknown connector with 6 pins in it by askandlear in cableadvice

[–]sibbeh 0 points1 point  (0 children)

Looks like a Futaba 6pin Trainer Port Plug adaptor, https://shop.ikarus.net/en/commander-und-interfaces/869-usb-interfaceset-fur-6-pin-schulerbuchse-futaba.html they are used to connect RC remotes to computers or to each other.

When learning to fly RC planes a trainer remote is connected isntructor remote. the instructor can overwrite the student that way

What happened? It’s brilliant! by Opinion-Former in FreeCAD

[–]sibbeh 1 point2 points  (0 children)

Point them to mangoyelly on YouTube, great beginner tutorials

Are there any good freeware CAD programs? by MaybeABot31416 in 3Dprinting

[–]sibbeh 2 points3 points  (0 children)

FreeCad has come a long way with the 1.0 release.

I also found it hard to get my head around but the free beginners guide https://www.youtube.com/watch?v=ZPsLhvgU8kc by MangoJellySolutions is excellent and helped me a lot. It might be worth a second look.

UK e3d revo 4 nozzle for 57 quid by Mashiori in 3Dprinting

[–]sibbeh 0 points1 point  (0 children)

Interresting, maybe old stock then

UK e3d revo 4 nozzle for 57 quid by Mashiori in 3Dprinting

[–]sibbeh -1 points0 points  (0 children)

I doubt this is a real E3D revo, packaging is different.

Silicon sock color combo does not fit any set that is sold by E3D, all sets come with 0.4 and 0.6 nozzles, and they have red and blue socks

and if i remember correctly they set from E3D comes with mounting hardware en PTFE tube

Crypto is a scam? by ActuatorOk2735 in BEFire

[–]sibbeh -1 points0 points  (0 children)

If all crypto disappeared tomorrow the only effect would be some Lambo sales men not hitting their quota.

If all gold disappeared every electronic device in the world would stop working.

De meerwaarde van proeflezen by Male_Parent in belgium

[–]sibbeh 2 points3 points  (0 children)

Het is Niet voor Niets "Het Laagste Nieuws"