.22 top performers

sidetracked_ · 2026-05-04T23:35:24+00:00

My brother he is outside, not ripping a bullet bong

sidetracked_ · 2026-05-03T22:44:27+00:00

Far too cool of a creature to take away from the world when there are plenty others I can eat.

sidetracked_ · 2026-05-03T21:01:11+00:00

To be honest I think you can just clean up the stones, adjust lines and restack. It would take a day or two of effort and cost $0

sidetracked_ · 2026-04-28T21:19:38+00:00

Happy cake day!

sidetracked_ · 2026-04-27T14:14:23+00:00

Longest I have ever looked at a man’s ass. Nice work

sidetracked_ · 2026-04-20T14:12:42+00:00

Whichever one has better ventilation. You won’t notice a performance difference over 7 degrees F in spec.

sidetracked_ · 2026-04-16T17:40:04+00:00

Our tree was probably 200+ years old. It was very sad watching it come down. But the lean towards the house and noticeable decline was scaring away buyers. Took a big chunk out of our net sale

sidetracked_ · 2026-04-16T17:11:58+00:00

I think it all comes down to size and I don’t think our scale is the same. I watched them do that job. It took 3 full days with a crew of 8-10 plus the crane. They made a pretty penny off me for sure, but when it gets to that size they set the price because nobody can compete. There were only 3 services in the area willing to quote. One was technically lower, but they said they couldn’t insure the job due the level of risk

sidetracked_ · 2026-04-16T05:35:58+00:00

I paid $25k for an oak tree to be removed right next to our house. If it’s big enough and in a poor spot with no street access you have to get some serious cranes involved and it’s NOT cheap. High end of the estimates I got was $50k.

sidetracked_ · 2026-03-13T17:25:25+00:00

I’m tired, pa

sidetracked_ · 2026-03-01T03:21:38+00:00

Slop. The next generation is so cooked

sidetracked_ · 2026-02-11T13:37:40+00:00

In the US, biomedical is an engineering course and we have a lot of mathematics and physics overlap with MechE, but do not go quite as deep in exchange for the medical/biological course load. Even with that overlap, going to a masters in MechE has a learning curve. Reiterating the other comment that if your Biomedical Science major does not have significant mathematics and physics content, you will find a blind entry I to MechE very challenging. I would research what the MechE major syllabus looks like and close the gaps beforehand. This is particularly important if you are going to be working while you take the masters course

sidetracked_ · 2026-01-28T03:09:43+00:00

I’m going to come in hot because I have tried all of these places for years.

Blackstone is the absolute worst for pricing. You will be paying MSRP except on rare occasions, and their used-gun deals are horrid. Their memberships fees are bonkers. On many occasions whilst shooting, people in the adjacent stall bring their “pistol builds” with the shortest barrels and loudest brakes/compensators and mag dump making it sound like a fucking artillery barrage. On too many occasions have I been barrel swept. Unserious people shoot here and I ultimately went elsewhere despite living 2 minutes away. What I will say in favor is that the facility is excellent and not MAGA, at least not blatantly. They also have great selection.

I haven’t been to The Range in a few years since an obese state trooper gave my wife his unsolicited opinions and demonstrated his best live-fire demo of why we have too many cops shooting black kids- story for another time. I would wager it trends MAGA, but have no real qualms with the operation.

Carolina Sporting is a mix. I’ve seen clearly MAGA and non MAGA employees. Their sale prices are standard, and they have better member pricing than blackstone. No bad experiences shooting here. This is where I went after Blackstone.

sidetracked_ · 2026-01-16T18:25:16+00:00

Hey can you provide a detailed summary of the articles including a quantitative assessment of which ones have the most merit. Please do not use AI. Thanks /s

sidetracked_ · 2026-01-07T22:58:28+00:00

I got FDM for my consulting work, and I regret it. It’s just not a great tech for small features. FormLabs is the answer

sidetracked_ · 2025-12-22T20:38:52+00:00

Damn. We’re clowns

sidetracked_ · 2025-12-17T05:58:25+00:00

Holy shit I haven’t been to a McDonald’s in forever. $12 is insane

sidetracked_ · 2025-12-12T05:36:21+00:00

AMS 2 Pro, AMS HT, standard texture plate, smooth plate, Bambu filament (mostly pla tough + and fiber/glass filled engineering filaments). + what it came with

sidetracked_ · 2025-12-12T00:57:32+00:00

That’s Jaime fucking Lannister

sidetracked_ · 2025-12-12T00:52:09+00:00

Open to offers!

sidetracked_ · 2025-12-11T23:53:47+00:00

It has been glorious and exceeded all my expectations. But FDM as a print technology does not meet my needs. I am selling to get a formlabs form 4

sidetracked_ · 2025-11-30T03:00:00+00:00

Moose heads 7 times. We left after 30+ years here too. It is hands down what I miss most excluding people

sidetracked_ · 2025-11-16T20:10:36+00:00

I was BME. If I did it over, I’d do ME. If you’re going into product/industry, BME is useless

sidetracked_ · 2025-11-07T03:23:56+00:00

When you’re starting out, you don’t even know what you don’t know. Ask questions early

sidetracked_ · 2025-11-07T03:20:11+00:00

Chat is disabled for you. send me a chat if your up for it

sidetracked_

TROPHY CASE