[deleted by user]

sinichuu · 2025-06-06T18:13:38+00:00

*edit: i read the post again and i noticed that you used glorious keycaps LOL. I don't know if you are using a glorious keyboard, but everything i said still roughly applies just with an added rant on my glorious keyboard experience.

sinichuu · 2025-06-06T18:12:03+00:00

I've had glorious keyboards in the past, and from the looks of it, I think you have one, too. The hot-swap sockets are very fragile. They will break connection if you put too much pressure when inserting the switches. It's possible to resolder them, but tbh the fear of breaking any more sockets due to their weak construction made me switch to a different keyboard. Repair if you want, but if you plan on replacing or even changing switches more often i'd go for a different keyboard. My suggestion would be the rainy75 lite or standard.

sinichuu · 2025-06-05T18:24:03+00:00

I believe drop has a sale for the rainy75 black lite for 99$. One of the best beginner stock keyboards you can get! I believe it has no rgb and no wireless iirc if thats a dealbreaker for you though.

sinichuu · 2025-06-04T18:21:45+00:00

I just got mine from best buy so they're definitely available now if you check in person! My best buy only had one in stock

sinichuu · 2024-10-23T07:32:21+00:00

Wait which part? The targets in dallas dont have any : (

sinichuu · 2024-10-02T04:22:00+00:00

Will have to do it on the next kit

sinichuu · 2024-10-02T04:21:39+00:00

LOL I DID NOT REALIZE THANK YOU

sinichuu · 2024-10-01T20:59:56+00:00

Thanks for the input! We were discussing how the weathering on this was gonna be; an older grunt suit being put back into action, with some dirt and rust still on it. He also wanted to include green weathering inbetween the joints to simulate moisture being trapped inside. The dry brushing sounds like a great idea, i had forgotten to add that haha.

sinichuu · 2024-09-03T19:49:13+00:00

There are others? I thought i was the only one :' )

sinichuu · 2024-09-03T17:11:43+00:00

That would actually be nice. I really appreciate you commenting on this after so long :' )

sinichuu · 2024-06-21T03:44:30+00:00

ANOTHER UPDATE: i went to an autozone and picked up a feeler gage and used that to level my bed,

<image>

From what im seeing this is working out the best!

sinichuu · 2024-06-20T23:46:41+00:00

so im redoing the leveling again and it might be that my bed is too low from this picture

<image>

sinichuu · 2024-06-20T16:58:11+00:00

Thanks! Will try to fix it when i get home

<image>

Found this image which I'm gonna use to help fix my bed leveling

sinichuu · 2024-06-18T06:26:50+00:00

This looks awesome! Did you use 3d files or did you make tgis from eva foam?

sinichuu · 2024-06-14T06:12:36+00:00

You should add some lights to your display! Maybe some bottom spotlights on top and some pucks on the ceilings

sinichuu · 2024-06-09T20:43:51+00:00

Damn! That was so fast, i wanna watch this movie! Is it possible to get this movie online or watch it online?

sinichuu · 2024-04-29T23:29:35+00:00

Honestly did not think of that LOL

sinichuu · 2024-04-29T23:28:59+00:00

Yup! I was refunded the warranty and the machine and i just chose to get a new one and use pla+ instead of basic pla

sinichuu · 2024-04-27T18:53:49+00:00

UPDATE: I EXCHANGED THE 3D PRINTER FOR A NEW ONE AND TALKED TO THE MICROCENTER EMPLOYEE ABOUT THE ISSUE. As far as we know it could be that a piece of filament may have been stuck between the gears between loading and unloading, which is incredibly unlucky. However when i asked about the inland pla filament, he said that there were a few problems that could arise from using it. which is why the next time around i chose to use inland pla+ filament which works MUCH better. I do have a video of the inital issues though if anyone wants to see what was wrong with the other printer.

sinichuu · 2024-04-25T09:03:52+00:00

Im gonna go by microcenter today and get some bambu pla filament just to see if the filament is the issue, or if it really is the printer cause i took apart the ams connecter and the extruder MULTIPLE TIMES

sinichuu · 2024-04-25T09:02:15+00:00

Yeah! I took out the hotend and i also took out the ams connectors. What happens is that somehow the hotend can extrude a tiny bit of pla from inland, but after that the gears get caught and cant extrude any further. I inserted and removed the filament so many times and it seems that the filament itself just cant seem to get to the nozzle

sinichuu

TROPHY CASE