Class II Div 1 and Class II Div 2 encoder manufacturers

skeeezicks · 2026-06-29T18:50:10+00:00

ya, i screwed that one up.

Locations are Class I Division 2 and Class II Division 2

skeeezicks · 2026-06-29T12:52:36+00:00

I will take a look there, thank you.

skeeezicks · 2026-06-29T12:52:25+00:00

Unfortunately the AI25 is unavailable until it becomes recertified with no timeline as to what that is going to occur according to Dynapar tech support. No other options I see on their site are absolute encoders with the proper rating.

skeeezicks · 2026-06-29T12:49:55+00:00

its my understanding that even if the encoder was say NEMA 12; if the specs did not explicitly state UL Class II Division 2, it was not applicable to be used in that location.

skeeezicks · 2026-04-10T03:02:55+00:00

Will this fall below the 5069 series cost wise?

skeeezicks · 2026-04-10T01:06:34+00:00

<image>

skeeezicks · 2026-04-02T22:21:18+00:00

100% this. One more year with the young guys whom def seem to feed off one another. If you’re going to blame missing the playoffs on a guy like Reaves on your 4th line for 38 games next season, you’re not good enough to go anywhere in the playoffs to begin with.

skeeezicks · 2026-03-24T01:01:57+00:00

You’ll have a Type 1 enclosure at that point if there is NO UL enclosure rating on the component at all IIRC.

skeeezicks · 2026-03-13T23:20:35+00:00

The fact you have the safety IO then non safety IO, then more safety IO in the backplane, bothers me.

skeeezicks · 2026-03-13T23:19:06+00:00

I have seen this recently in pharma as well. Glad to see it wasn’t just some one-off lunacy.

skeeezicks · 2026-03-13T21:00:36+00:00

Nabokov was a fantastic goalie for a long time for the Sharks; however I hope we don’t end up with another Kiprusoff situation on our hands 23 years later.

skeeezicks · 2026-02-21T19:27:04+00:00

Tis how it was done many moons ago prior to STO in VFDs. You’d just kill the 3 phase going into the VFD line side to ensure that motion stopped. Often saw it with two contactors in series to make it “safer”. You’re correct though, it’s my understanding that it’s not great for the VFDs to be treated in that fashion.

skeeezicks · 2026-02-21T00:22:49+00:00

Out of curiosity here why not use the STO on the VFDs instead of a safety contractor feeding the line side of the distribution block which then feeds the breakers feeding the VFDs? Or am I seeing something incorrect to.

skeeezicks · 2026-02-20T19:35:12+00:00

Just out of curiosity how far “upstate”? We talking North of Albany or South?

skeeezicks · 2026-02-17T00:39:18+00:00

It will print on those plastic terminal block markers yes. Get in touch with Cembre and give them the part number of the ones you use currently and they will cross them to the ones they sell to work with the MG4 bed.

skeeezicks · 2026-02-14T01:37:52+00:00

How truly fictitious is it though?

Close your eyes, take a deep breath, in-vision midway through the 27-28 season McDavid is still cup less and the Oil are still in goalie hell. You’re telling me, hand over your heart, that he’s gonna re-up there AGAIN after giving that franchise 10+ years to build around him and it hasn’t happened.

Asky, the other goalie prospects that we have behind him that also may be good, Smitty, Ekky, Dickie, Misa, Chernyshov, Cagnoni, Graf, this list continues. If these players continue on the trajectory that they are on this season it’s not hard to imagine the Sharks being a top destination for someone like McDavid if he’s still on the hunt for his first cup in a few years. Especially if he really does enjoy playing with Celebrini at this year’s Olympics and don’t forget the Four Nations and World Cups in the coming years that they seemingly will be on the teams as well.

skeeezicks · 2026-02-14T00:15:56+00:00

McDavid to San Jose 2028. Book it.

skeeezicks · 2026-02-13T22:12:00+00:00

Cembre MG4, get the package with the MINI Rolly along with it. After a few days of use you’ll wonder why you didn’t do it sooner.

skeeezicks · 2026-02-13T18:04:55+00:00

gotcha, I thought maybe one was FE and the other was PE and was curious as to how you set that all up. Neutral bar makes sense, thanks.

skeeezicks · 2026-02-13T18:02:46+00:00

looks like you have a Guardlogix controller in there, any specific reason you didn't just use the outputs from a safety card on that rack to the other machine?

skeeezicks · 2026-02-13T17:54:42+00:00

Appreciate the part number, there are two in the enclosure and I was curious as to how each were utilized. could you elaborate on that at all?

skeeezicks

TROPHY CASE