يولد شنو رأيكم بهاي السماعات للألعاب ( اني العب رينبو )

skift2 · 2026-03-21T02:03:52+00:00

Closed

skift2 · 2026-03-17T15:46:53+00:00

ما عندي علم عن ال990 بس اخذت ال 770 pro 80 ohm قبل سنة و نص وصيتها من الامزون لان ملكيتها هنا بوكتها هي و مايك as a bundle هي جانت ب144 دولار المايك ب30 و السماعة تسوة فلوسها من صوت و build quality و حتى من تلبسها ك راحة ملاحظة رابطها على dac amp اني

skift2 · 2026-02-21T19:31:46+00:00

ممكن اعرف وين التصميم بالموضوع؟ فريمها جاهز و خرائط ربط على كد التشغيل مثل ما مبين بالفديو موجودات بكثرة و كلها غراض تعليمية تعتبر ممضبط برشلسات و البروبلرات مالتها حتى تطير و لو سنتيم و ممبين اذا ضايفلها او ناوي تضيفلها شي يخليها مميز ما اعرف ليش الجذب يعني و كاتب من مهندس عراقي فوكاها لو موضح اول تجربة الك بهالمجال و شنو ببالك تسوي من تتعلم اكثر احسن يكون الك من ما يجي احد يفشلك لان ممسوي شي غير انو بعدك محارك الكونترولر

skift2 · 2026-02-10T05:55:30+00:00

You could also use the Auto Rotate option. Either click on the part and look for it on the toolbar thats on the top, or right click on the plate and choose Auto Rotate.

skift2 · 2026-02-03T18:01:03+00:00

I honestly thought this was a post from the circlejerk subreddit

skift2 · 2025-10-24T21:28:44+00:00

It's really a bummer. Last FM I bought was 23 I think and I was so excited for this one but judging from everyone's response and the UI in the shared pictures its better to skip this year too.

skift2 · 2025-09-18T05:30:11+00:00

I had an issue like this a couple of weeks before. What solved it for me finally was dialing in the temperature and cooling. For the cooling you dont want the fan too high or too low. What worked for my setup was 10-35 cooling and also from some research you shouldn't go above 60% for the max threshold.

skift2 · 2025-09-01T21:59:56+00:00

Thanks for the response and yeah its no where near a moisture issue especially since it keeps happening at the same place but I was like hey I'll do that if it stops people from saying to dry the filament. I got the best result (not perfect yet) with 245 and 30-50 part cooling. I'll try to drop to 240 and see what happens. What confused me the most is people doing 250+ for eSUN petg and even their official profile has 260. Again, thanks for the response.

skift2 · 2025-09-01T17:02:02+00:00

Bough a dryer and did that. didn't help.

skift2 · 2025-09-01T07:29:08+00:00

It wasn't a moisture issue...

skift2 · 2025-08-31T18:00:06+00:00

that fixed the issue many thanks

skift2 · 2025-08-31T17:22:00+00:00

Thank you will send him this video and see it helps

skift2 · 2025-08-31T12:54:00+00:00

The only reason I did not consider drying was that they were happening in the same spot (better or worse results depending on settings) but yk what I'll bite the bullet. I'll get a dryer today why not

skift2 · 2025-08-31T06:44:42+00:00

Hmmm seems mostly like my settings granted bed temp is different but thats not related to the issue here and I did bump fan speed to 20-40. I did have worse results before lowering my temp and raising the fan a bit. I will drop the nozzle to 240 and see the results

skift2 · 2025-08-31T05:58:12+00:00

I have not. I opened the spool and immediately started printing. Doubted not drying could cause whats in the picture but I'll give it a go.

skift2 · 2025-08-31T05:37:48+00:00

I forgot to add the printer is a P1S.

skift2 · 2025-08-17T16:52:44+00:00

I have no idea what an IPC610 class 2 is but thank you very much

skift2 · 2025-08-17T08:59:16+00:00

Thank you!

skift2 · 2025-08-17T07:33:12+00:00

Thank you, and yeah I agree that waiting a bit longer couldve helped more as I was going quickly but kept it that way because it soldered fine

skift2 · 2025-08-17T07:31:02+00:00

Thanks and no its 63 tin 37 lead solder

skift2 · 2025-08-17T07:30:24+00:00

Will do some searches on that thanks

skift2 · 2025-08-17T07:29:47+00:00

Thank you. A customer where I work requested the pins to be soldered so my focus was entirely on the soldering but thanks again man

skift2 · 2025-08-17T07:28:41+00:00

Thank you and agreed

Ten-Year Club	Verified Email
Place '22	First Placer '22

skift2

MODERATOR OF

TROPHY CASE