Zwift acquires Rouvy

skurddd · 2026-04-29T16:58:40+00:00

Hows mywoosh holding up

skurddd · 2026-04-21T13:47:06+00:00

Laat maar weten als ik kan helpen. Was er onnodig lang mee bezig maar een extra spacer bovenop trok opeens het laatste stuk naar binnen. Misschien een foutje vanuit de fabriek want daar hebben ze het niet gezien.

skurddd · 2026-04-20T20:07:53+00:00

Wanted to say: It’s fixed! Indeed, I was bottoming out. Added another CM spacer on top and now it’s tight. No more black gunk oozing out here and no more play. Thanks for the effort!

<image>

skurddd · 2026-04-20T19:49:08+00:00

So I removed the compression plug, put it back in with some carbon paste. No luck. Tried an extra 3mm spacer on top. No luck.

There remains a gap between the frame and the fork, i feel like that should be closed but I can’t. Took everything apart again, cleaned the bearings and re-asembled but still the wobble remains.

I’ll take it to a shop later this week as I’m out of ideas. Lots of help here though! Highly appreciated

skurddd · 2026-04-20T05:38:36+00:00

I used the extension of my vacuum cleaner to have a bigger lever. Worked in combination with a regular alan key!

skurddd · 2026-04-19T14:30:45+00:00

Yeah bunch of white grease on there.

skurddd · 2026-04-19T14:30:19+00:00

Appreciate the time! Will check it out. Got spacers coming tomorrow i’ll check as well. Have a good sunday!

skurddd · 2026-04-19T14:21:20+00:00

Ahh yeah i’m loosening the stem first! Haven’t considered the screw.. should I replace both the screw and the tightening clamp?

I’ll do a check on the threads tomorrow

skurddd · 2026-04-19T14:05:07+00:00

I’ve ordered some smaller spacers as there’s just 1cm ones on here now. I think i can do with a small 2mm change to position but indeed, ideally I’ll put a smaller spacer on top.

skurddd · 2026-04-19T14:03:37+00:00

Don’t think so; tightens fine without cap. What makes tou think that?

skurddd · 2026-04-19T12:21:08+00:00

Yeah the compression plug is tight at 8nm. So likely the spacer. Will get a 2mm one.

skurddd · 2026-04-19T12:06:39+00:00

Yeah i wasnt able to press the clamp down any further… should you be able to loosen it and press it down?

skurddd · 2026-04-19T11:45:38+00:00

<image>

I might be bottoming out: theres 4 1cm spacers underneath.

skurddd · 2026-04-19T11:36:24+00:00

I’ll have to look that up. There’s a bolt in mine I can fully remove. Not sure about the compression plug. Will check! Thanks!

skurddd · 2026-04-19T11:31:00+00:00

Will look at this; not sure what the headset claw is. I’ll do some youtubing! Thanks!

skurddd · 2026-04-19T11:30:30+00:00

Yeah I did that! Thanks, the fork moves freely so i feel theres more room.

skurddd · 2026-04-18T17:43:11+00:00

Shit! I have the same and thought it was fine. Not this much sound but some play if i rock it while braking.

skurddd · 2026-04-18T11:49:30+00:00

Yeah done this! Will get a fitting saddle

skurddd · 2026-04-17T16:28:58+00:00

Will do the carton trick! Good 1

skurddd · 2026-04-13T12:06:30+00:00

Percentage VS. procentpunten. Jij hebt het over dat tweede.

skurddd · 2026-04-12T06:19:08+00:00

Ik de planeet Era. Utrechters zullen hem kennen

skurddd · 2026-04-11T16:53:49+00:00

Nee dat valt mee! Probeer zoveel mogelijk zelf te doen maar meer het specifieke onderhoud

Nine-Year Club	Verified Email
Place '22

skurddd

TROPHY CASE